Quote:
Originally Posted by MadToy
Quote:
Originally Posted by Phantom10R
it won't though. it will allow you to run up to e30ish because It will only do as much boost and timing as the stage 1 93 map allows. it doesn't just scale unlimited. it's still limited by stage 1 parameters. same with stage 2 etc.
|
You're half right. The limits of the MM stage 1 parameters are the low limits, not the upper limit. The flex fuel tables have upper limits beyond the stage 1 (or 2) parameters.
The blend factor will do just that - blend the ratio between the lower and upper table limits based on the factor determined at the E-Content read by the sensor.
This is much different than putting E30 in a standard stage 1 OTS map. Doing that will just get the max out of a 93 or 91 tune. Doing it in a flex fuel tune will give you more power. Stage 1 MM vs Stage 2 MM will just limit the flex fuel torque tables lower (my assumption since I can't open an OTS map in the editor) - but timing will certainly be increased.
|
timing sure but not boost.