It really does depend....
I was working on my concrete garage floor to epoxy it and I had several oil stains I had to get out before I put the epoxy on
I tried EVERYTHIN, (if I can remember)
Kitty litter did frickkin squat
All manner of degreasers if it had the word De and GREASE I used it
TSP
Detergent
Sawdust
NOTHING, in the end I rented a big ass fllor scrubber cleaner from homedepot, it had a diamond cutting stuff on the bottom and then GROUND the top layer off
Messy as hell, but did the job
CONCRETE IS PORUS and UNLESS you get to it right away and put some sawdust or stuff on it, your done for it will soak in INCHES below, and you can't get it out
125 bucks for 4 hours
Quote:
Originally Posted by keg97
I've got some oil spots on our exposed aggregate driveway. Any suggestions on the best product to remove them? If it matters, it's new "clean" oil as "somebody" didn't put the rubber gasket on the oil filter the right way so there "might" have been some oil leakage when I pulled the kid's car outta the garage.
Thanks!
|