Quote:
Originally Posted by MMMGuy60
Very nice! How easy it is to replace the shifter or boot?
|
Not hard. But I’ve replaced boots and knobs on most every car I’ve had for years.
Basically just pull up on the boot and the boot and frame come right out. Then yank really hard on the stock knob and it pops off.
Then I just removed the old boot and knob and carefully pulled out all the staples that held the boot in. Didn’t wanna crack the plastic frame. Fit the new boot on and cut holes to hold it to the frame via the frame clips and fixed the corners down with a hot glue gun. Put the new knob in place and held the boot up to it with a zip tie. Took about an hour total. Used a boot sized for a Lancer Evolution X.
