[Bayliss21]

Originally Posted by Geighty7

Honestly you don’t really need them but to each their own. H&R makes a great solution. There is pretty much 0 tilt in this car when in sport+ chassis.

Have you taken the M2 to a track? It has a significant amount of body roll.

[HP Autosport]

Originally Posted by Bayliss21

Have you taken the M2 to a track? It has a significant amount of body roll.

If you track, getting the best coilovers you can afford with spring rates that suit your driving style is best. Use anti-roll bars to dial in the final balance of the vehicle. We have yet to find any need to add anti-roll bars on the F8X/G8X we set up at our shop.

[Geighty7]

Originally Posted by Bayliss21

Have you taken the M2 to a track? It has a significant amount of body roll.

Agreed on track, but daily use no need.

I took another G87 on track and it had some roll. Would for sure throw them on if I tracked it.

[kevinG87]

Does anyone know the torque spec for the rear subframe bolt to chassis? G87 M2

[RobM2]

Did any of the folks on this thread install sway bars? How were the results?

I'm looking at doing the H&R sway bar just in the front and am curious if that'll reduce roll without adding understeer. In general I'd worried stiffening up just the front would induce understeer.

[BroDoze]

On BMWs, adding a stiffer front bar can actually bring a lot of neutrality and slight oversteer. Did wonders on my 135i.

That said, I'd need some confirmations on the G87 platform.

Ride quality will generally suffer with stiffer bars. Less independent suspension effect.