[DSTR]

Originally Posted by curtdragon

Curious about the alignment. Did you need it or was it something they checked?

I align with each wheel change winter and summer. The alignment was actually quite good overall. Tires can be ruined rather quickly with a bad alignment and once the wear begins its over. A bit of extra maintenance ensures a longer tire life and is not too expensive.

[curtdragon]

Originally Posted by DSTR

I align with each wheel change winter and summer. The alignment was actually quite good overall. Tires can be ruined rather quickly with a bad alignment and once the wear begins its over. A bit of extra maintenance ensures a longer tire life and is not too expensive.

Gotcha, I thought you were having some issues.
And yes when changing wheels/tires you should do an alignment check a the least

[Jonesing4a2]

Installed M2 door projectors from Open Throttle

[Whytar]

They are freaking awesome. Can you guys please STOP making me spend money. This is getting out of hand...

[NovaChris]

I added a BFI shift knob and boot.

[deis111]

Hello

Im new here plz explain whats is the difference of 825m and 930m ?

What type the wheels are on the photo?
930m ?

[rons e92]

Originally Posted by deis111

Hello

Im new here plz explain whats is the difference of 825m and 930m ?

What type the wheels are on the photo?
930m ?

930m in the photo.

930M are cast. 825M are forged

Forged wheels are lighter and generally stronger.

The design is nearly identically, although there appears to be a slight variation in the smaller spokes if I stare at them long enough.

Likely the same design.

[Jeenius]

PPF Time.....

[Orange fever]

Nice , the The whole car?

Originally Posted by Jeenius

PPF Time.....

[Jeenius]

Originally Posted by Orange fever

Nice , the The whole car?

Yea, went full and sold a kidney...

[mdrobc13]

Originally Posted by Jonesing4a2

Started easing into the mod game

Which one is that? Looking for one for my car's trunk but haven't found a good fitting one yet.

Me what did I do today for my M2? I finally installed my Dahler Flap Controller and Kies Motorsport Rear Carbon Fiber diffuser. Went with the one from Kies as good sale price and discount given and didn't need a hugely expensive CF part back there just something to tie in my CF rear spoiler (also Kies model) and front pieces and mirror caps (R Carbon). All match nicely and set off from the gloss black OEM pieces they replaced nicely.

Then next up or actually what I did first was install the Dahler Exhaust Flap controller to pair up with my Valvetronics exhaust and midpipe set up. Yes Valvetronics does come with its own electronic controller and flap motors but that set up does require a power tap into your fuse box or electonics and I do like the cleaner plug and play set up Dahler offers....to do basically the same thing. Less points of failure and also get to keep my own OEM flaps so I went that route. Still have the Valvetronics flap controller and flaps and wiring and remotes if anyone is interested in them. Best off...posted in Marketplace.

I didn't mount my box under the car as. Kies video shows but found there are two rubber grommets on both sides of the trunk where the battery sits that are actually perfect to mount the Dahler control module and then route the lines for each side out thru the L & R grommet holes down to the exhaust. Each hole comes out right above the area where the flap motors and connectors are so all needed is to connect the flapts to the bridge connector and then the remaining connector to the Dahler box wiring and good to go. No additional power requirements needed. Results...sounds great! Definite change from the half open valves BMW OEM gives you. Can hear it immediately. Remote is mapped to my mirror link buttons so can use them and I keep the Dahler remote on my spare now.

[Jonesing4a2]

[QUOTE=mdrobc13;31638588]Which one is that? Looking for one for my car's trunk but haven't found a good fitting one yet.


WeatherTech Cargo Trunk Liner for BMW 230i, M240i, M2 (G87) - Trunk (401747) Black

[wife-dog-bmw]

Installed the MAD skid plate..wheel spacers next.

[MineralGreyMetallic]

Originally Posted by Jeenius

PPF Time.....

Which shop? Let us know how it comes out.

[Jeenius]

Originally Posted by MineralGreyMetallic

Which shop? Let us know how it comes out.

Had it done at Envious Detailing in OC. They're not the cheapest but not the most expensive either. They did a Custom install so all corners were tucked in. They also did the installation for the spoiler and all the grilles for the oil cooler and window tinting too. Car was in the shop for 5 days. Overall, im happy with the results.