[M2Jorge]

Got my ecu back from femto, 6 day turn around time.

Stage 2 is definitely way too much for my current tires, competition tuning was pretty sweet but I’ll settle for stage 1 ots until I get better tires and a custom tune.

Car is pretty ridiculous now, a little nerve wracking to actually drive actually.

[40 Cylinders]

Suntek ceramic 38%

[M2PDX]

Originally Posted by M2Jorge

Got my ecu back from femto, 6 day turn around time.

Stage 2 is definitely way too much for my current tires, competition tuning was pretty sweet but I’ll settle for stage 1 ots until I get better tires and a custom tune.

Car is pretty ridiculous now, a little nerve wracking to actually drive actually.

Attachment 3404484

Share more please!

HP #s, torque curve, driving impressions, etc. Pictures of install?

[JMcLellan]

I got my car back from PPF and window tint today. Very pleased with the results of the window tint and glad I went with 35% on rear/sides, 70% for the windshield. I scoured over the PPF and it is really clean so no complaints there either. Need to get some better pics with less reflections but here you go.

[izzyM2]

Originally Posted by JMcLellan

I got my car back from PPF and window tint today. Very pleased with the results of the window tint and glad I went with 35% on rear/sides, 70% for the windshield. I scoured over the PPF and it is really clean so no complaints there either. Need to get some better pics with less reflections but here you go.

What are you lowered on?

[JMcLellan]

Originally Posted by izzyM2

What are you lowered on?

Port installed MP HAS kit at the default settings.

[HanhREm2]

Originally Posted by 40 Cylinders

Suntek ceramic 38%

More pics please =)

[40 Cylinders]

Here is a list of mods & original order specs..
As ordered : BSM, manual, stock wheels, std seats w/blue stitching
M-Performance: HAS, Steering wheel Pro, Arm Rest, Flr Mats
M-P C/F: Roof, Mirror Caps, Antenna, Door Sills, Rear Diffuser, Rear Bumper Attachments, Air Inlets, Interior Trim
Mods: Orafol 932M wrap, Apex VS-5RS wheels, Millway Trust Bearings
AReeve Stage 2 Tune, Autoid/TRE Rear Spoiler & Frt Grille,
Unit17 Front Spoiler Lip, F87 Shift Knob w/custom boot, Rear seats covered w/alcantara w/ BMW tri-color stitching and TRE C/F rear cover, door M2 light projectile,

[pacheco516]

Originally Posted by 40 Cylinders

Here is a list of mods & original order specs..
As ordered : BSM, manual, stock wheels, std seats w/blue stitching
M-Performance: HAS, Steering wheel Pro, Arm Rest, Flr Mats
M-P C/F: Roof, Mirror Caps, Antenna, Door Sills, Rear Diffuser, Rear Bumper Attachments, Air Inlets, Interior Trim
Mods: Orafol 932M wrap, Apex VS-5RS wheels, Millway Trust Bearings
AReeve Stage 2 Tune, Autoid/TRE Rear Spoiler & Frt Grille,
Unit17 Front Spoiler Lip, F87 Shift Knob w/custom boot, Rear seats covered w/alcantara w/ BMW tri-color stitching and TRE C/F rear cover, door M2 light projectile,

Very nice and the color is fire

[xtougher]

Originally Posted by JMcLellan

I got my car back from PPF and window tint today. Very pleased with the results of the window tint and glad I went with 35% on rear/sides, 70% for the windshield. I scoured over the PPF and it is really clean so no complaints there either. Need to get some better pics with less reflections but here you go.

I don't think enough light is reflecting on that.

[M2Jorge]

Originally Posted by M2PDX

Share more please!

HP #s, torque curve, driving impressions, etc. Pictures of install?

I’ll try to get it on a dyno in the near future, but the car overall feels explosive, which is pretty impressive considering the car prior to the tune felt like slouch.

[JABCAT]

Installed M Performance Alcantara knee pads.

Simple 2 min install. Pop the shifter surround up by pulling from the bottom inside the center console, then use a plastic trim tool to pop each oem knee pad out. Snap the new ones in and done. They're much thicker than the oem plastic pieces.

Part # 51-95-5-A27-1B6. List price is $302, but you can get them for $232 here, www.bmwpartscenter.com

[ScottyRyan2019]

Originally Posted by JMcLellan

I got my car back from PPF and window tint today. Very pleased with the results of the window tint and glad I went with 35% on rear/sides, 70% for the windshield. I scoured over the PPF and it is really clean so no complaints there either. Need to get some better pics with less reflections but here you go.

Looks good! I really like the blue calipers as they blend in with the all black look 👍

[Vmaxx]

Originally Posted by JABCAT

Installed M Performance Alcantara knee pads.

Simple 2 min install. Pop the shifter surround up by pulling from the bottom inside the center console, then use a plastic trim tool to pop each oem knee pad out. Snap the new ones in and done. They're much thicker than the oem plastic pieces.

Part # 51-95-5-A27-1B6. List price is $302, but you can get them for $232 here, www.bmwpartscenter.com

Nice. Still trying to picture where exactly to pull on to remove shifter surround piece. Does anyone know if there is a install video out there?

[JABCAT]

Originally Posted by Vmaxx

Nice. Still trying to picture where exactly to pull on to remove shifter surround piece. Does anyone know if there is a install video out there?

Open the center console lid and pull up underneath where the usb-c port is. It pops right up.

[Vmaxx]

Originally Posted by JABCAT

Open the center console lid and pull up underneath where the usb-c port is. It pops right up.

Ah..gotcha! Thanks

[JMcLellan]

Originally Posted by ScottyRyan2019

Looks good! I really like the blue calipers as they blend in with the all black look 👍

Thank you! Do you think I have a "type" with my cars?? Here is my previous M240i with the black and blue. My wife's SUV is also black and I'm sure there is some blue paint out there for her calipers....

[rons e92]

Hasn't happened yet, but the car is getting dropped off for some upgrades.

E40 is cool, but I want to run Ignite Red.

[ScottyRyan2019]

Originally Posted by JMcLellan

Thank you! Do you think I have a "type" with my cars?? Here is my previous M240i with the black and blue. My wife's SUV is also black and I'm sure there is some blue paint out there for her calipers....

It's a good look!

[JMcLellan]

I know there are so many other cool things that I could do to my M2 today but I wanted to close the loop on my incident from last week. Last Friday this wannabe-sword piece of crap tried to impale the bottom of my car. I had the car hoisted up and checked out today. Got really lucky as the metal nearly got the brake lines and only made a small impression on the underbody.

[xtougher]

Originally Posted by JMcLellan

I know there are so many other cool things that I could do to my M2 today but I wanted to close the loop on my incident from last week. Last Friday this wannabe-sword piece of crap tried to impale the bottom of my car. I had the car hoisted up and checked out today. Got really lucky as the metal nearly got the brake lines and only made a small impression on the underbody.

Geez. Was there some necessary repair there or more to just check to see the extent of the damage?

[JMcLellan]

Originally Posted by xtougher

Geez. Was there some necessary repair there or more to just check to see the extent of the damage?

I wanted to see under the car just in case there was damage needing attention. The metal piece tore through the plastic/felt underbody guard and I wanted that patched up to prevent debris and moisture from getting in.