[BroDoze]

After Dr Beasley’s Matte and Gloss Film Ceramic. Also installed MAD intakes yesterday.

Thinking of a suspension lift - not high enough!

[it.g.ma_g87]

Originally Posted by 71dsp

What wheels are those, and what are the specs? Looks great!

BBS LM converted to 3 piece - 20x10 et 10, 11 et15

[it.g.ma_g87]

Originally Posted by Dixie12

What brand of rear spoiler is that , best I've ever seen ......

CT Carbon

[curtdragon]

Originally Posted by M2 CCO

RK Ti strut bars and intakes installed!

That's how I want my engine bay to look, except the intake and strut will be carbon too lol
However, the purple/blue Ti would go well with the purple exterior.
Just looked at the website, it's a but annoying you have to buy "v1" and "v2" instead of getting the whole strut as a set...

[RMB]

Originally Posted by BroDoze

After Dr Beasley’s Matte and Gloss Film Ceramic. Also installed MAD intakes yesterday.

Thinking of a suspension lift - not high enough!

That car is simply amazing. The paint shows off the lines perfectly and the rims just make it pop!!! Beautiful car!!!

[apez]

Took the spacers off... Winter tires going on Friday morning. Going to miss beautiful, dry back roads and aggressive offsets!

[ScottyRyan2019]

Originally Posted by Mhrob24

Skyscraper Grey—highly recommend 👍🏽

Looks even better in person.

I agree that Skyscraper Grey is a really nice color 👍

[Xspeedracer]

Just added the factory rear carbon spoiler🙂

[LeggoRacing]

Installed some MCS coilovers . Set ride heights, took a test drive, and now alignment time.

[Jonesing4a2]

Wished the M2 a bittersweet "goodbye for now" as I dropped it off for tint and "track pack" PPF...

[Digitalprty]

Gave her a deep clean and dropped her off for storage until spring. Now to decide on some wheels while I wait.

[Mvfjet]

Originally Posted by Jonesing4a2

Finally picked it up (last week, not today)! Needless to say, the username no longer applies...

My ordered PBM just went into production and your pictures made me very happy with my color choice.

[DS_BMW]

Originally Posted by DarkNight707

Recoded the anti-dazzle headlights for the 100th time.

How hard is it to do? I would like to have this done on mine and my 3 series.

[DrewNewM2]

Originally Posted by Digitalprty

Gave her a deep clean and dropped her off for storage until spring. Now to decide on some wheels while I wait.

Storage already? It’s like 80 degrees in NY. I will put mine away after Thanksgiving before any snow/salt and then it will still come out in those warm days we have had in recent winters.

[Digitalprty]

Originally Posted by DrewNewM2

Storage already? It’s like 80 degrees in NY. I will put mine away after Thanksgiving before any snow/salt and then it will still come out in those warm days we have had in recent winters.

Normally, I’d wait, but I’m on a plane to California right now for the next few weeks.

[AZG87]

Originally Posted by DrewNewM2

Storage already? It’s like 80 degrees in NY. I will put mine away after Thanksgiving before any snow/salt and then it will still come out in those warm days we have had in recent winters.

I definitely don't envy those who live in climates that dictate when a car can be driven or what tires can be run. You guys fight the good fight!

That said people also don't envy our summers here so there are trade offs anywhere I suppose.

[TallGibbs]

Added my legally required front mount license plate holder. Went with the "Sto'n Sho" model, which fits automatic transmission with Active Cruise Control. SUPER EASY installation, took me less than 5 minutes. Honestly, it took more time to attach the license plate itself to the holder than to mount the bracket to the front lip.

Few pictures to show it more clearly for anyone else wondering about how this mounts, or how to install. Don't you dare paysomeone to install this for you; all you need is Philips head screwdriver, 10mm box end wrench and (ideally) 10mm socket on ratchet for quick install but you could do it with just your 10mm box end wrench.

[Geighty7]

I just ordered a new PTB race clutch that can take the torque from my stage 2 e30 tune. I have an upcoming Paul Johnson e50 tune that will for sure need it, as I assume I’ll be making 750whp on stock turbos.

Very excited to see how this clutch feels in comparison to OEM.

I will install the clutch and my autosolutions SSK at the same time and update here on drivability on a stage 2 ACN91 tune as well as running flex fuel.

[NewToM]

Originally Posted by Geighty7

I just ordered a new PTB race clutch that can take the torque from my stage 2 e30 tune. I have an upcoming Paul Johnson e50 tune that will for sure need it, as I assume I’ll be making 750whp on stock turbos.

Very excited to see how this clutch feels in comparison to OEM.

I will install the clutch and my autosolutions SSK at the same time and update here on drivability on a stage 2 ACN91 tune as well as running flex fuel.

Excited to see results.

[JMcLellan]

Originally Posted by Geighty7

I just ordered a new PTB race clutch that can take the torque from my stage 2 e30 tune. I have an upcoming Paul Johnson e50 tune that will for sure need it, as I assume I’ll be making 750whp on stock turbos.

Very excited to see how this clutch feels in comparison to OEM.

I will install the clutch and my autosolutions SSK at the same time and update here on drivability on a stage 2 ACN91 tune as well as running flex fuel.

Why all the hate for the longevity of your tires? Lol. I'm curious to see how this turns out and how the car handles that much juice.

[DarkNight707]

Originally Posted by DS_BMW

How hard is it to do? I would like to have this done on mine and my 3 series.

Super easy! I just followed the instructions posted in one of the threads. I believe it’s a post by @M2siast but cannot find it.

[Geighty7]

Originally Posted by JMcLellan

Why all the hate for the longevity of your tires? Lol. I'm curious to see how this turns out and how the car handles that much juice.

Lol my tires already despise me. On the BM3 stage 2 OTS Map1-ACN91 (I live in socal) I can’t keep traction to save my life.

I can only imagine e30 and e50

Hoping a 315/30r20 will fit in the rear because 305 is not doing the job with p4s