[mrdudley]

Originally Posted by sammytothe

Installed the CT Carbon duckbill spoiler today! I plan on getting the Alpha N wing eventually

Can you capture a photo from straight back? Thanks!

[sammytothe]

Originally Posted by mrdudley

Can you capture a photo from straight back? Thanks!

Of course, here are a couple from the other day! Let me know if you want a higher angle?

[mrdudley]

Originally Posted by sammytothe

Of course, here are a couple from the other day! Let me know if you want a higher angle?

Thanks! How’s the weave and quality? I have the full MHC kit but tempted to swap the spoiler for this.

[mdrobc13]

Originally Posted by usafmike

Custom shifter from IND. I had the same one in my F87. Much better feel IMO.

How did you remove the OEM shifter? Was it a big job? Did the whole shifter and boot need to be removed? Any special tools? Looks good. I have a Sportshifter custom one on the way...so interested.

[curtdragon]

Originally Posted by sammytothe

Of course, here are a couple from the other day! Let me know if you want a higher angle?

Just keep taking them u til we say stop 😆😆😆
I had a duckbill on my BRZ and definitely want one on this. I want to get a stick on first then the Alpha N later along with their side skirts.

[Kevin_The_Clean1]

Originally Posted by M2 CCO

Congrats! The install is pretty straight forward so should be a nice quick little project! One thing to note for me was that upon install I wasn’t getting any bass… zero… So I reached out to BMW DIY Guy and he gave me the tip to check the pins on the wiring harness that was provided. Sure enough one of them had backed out, so I reset it and it worked like a charm! Sounds great! You won’t be disappointed!

Does this Alpha 1 amp make the entire system sound better & more rich... ?

[BMW DIY Guy]

Originally Posted by Kevin_The_Clean1

Does this Alpha 1 amp make the entire system sound better & more rich... ?

Yes and can improve the existing HK speakers, or go all in and upgrade them as well.

[M2 CCO]

Originally Posted by Kevin_The_Clean1

Does this Alpha 1 amp make the entire system sound better & more rich... ?

Yes. The amp is the only thing I’ve upgraded within the sound system and I’m very pleased with the improvement. I’ll probably opt for the underseat subs next.

[Kel_0113]

Some quick shots...

Finally received the Armor Extend V3 rear spoiler and added the Zunsport grilles.

[sammytothe]

Originally Posted by mrdudley

Thanks! How’s the weave and quality? I have the full MHC kit but tempted to swap the spoiler for this.

I think the weave and quality is just fine! I also have ADRO and Vorsteiner parts on the car and can’t really tell a difference; the duckbill is 100% worth the price. Here’s some pictures in better lighting

[mrdudley]

Originally Posted by sammytothe

I think the weave and quality is just fine! I also have ADRO and Vorsteiner parts on the car and can’t really tell a difference; the duckbill is 100% worth the price. Here’s some pictures in better lighting

Looks great! Thanks.

[AZG87]

Installed the R44 front fender liner clearance kit so can go wider tires in the front without rubbing. Definitely much more clearance now. Also installed Maxton v5 front lip and v4 sides and rears. Chose that lip as it was more conservative without killing front ground clearance but still ended up being more aggressive than anticipated.

[Jeenius]

Megachip mudguards and MP carbon seat backs… Pardon the brake dust….

[IamJoe]

Installed my vanity plates.

[mdrobc13]

Got my Xmas/B-day gift care of VIBE Motorosports and Vossen's Cyber Monday/Black Friday sale last month. Just delivered Vossen HF-5 wheels in Anthracite Gray clear finish in OEM fitment for my M2. Installation went well yesterday with swap out of my OEM Michelin PS4 set up in 19" and 20" staggered and move over of my TPMSs to the new wheels. Pleased with the setup and fitment...and overall Tom O at ViBE was great to work with.

Ceramic coated wheels with one coat of Crystal Armor wheel and another AmmoNYC Reflex Pro II ceramic to deal with brake dust until can source good set of pads to replace OEM ones in the spring. Car is lowered on Eibach Sport Springs and thankfully no spacers were required!

[Scrutineer]

Originally Posted by IamJoe

Installed my vanity plates.

Outstanding. I’ve been trying to come up with a new one as I lost my old one with a trade. Bureaucracy.

[AZG87]

Weather tech trunk liner added with optional fold out bumper flap for when loading stuff.

[kenairways]

Installed some goodies today.

MHC front lip
18mm wheel spacers rears
15mm wheel spacers fronts

No rub full lock. 18mm in fronts will def. Rub IMO. I’m also considering changing my suspension to something else for more adjustability. Factory MP HAS kit, imo kind of waste of money if you want more low than this.

Note: I’m on MP HAS kit from factory. Maxed out

[DrewNewM2]

Originally Posted by kenairways

Installed some goodies today.

MHC front lip
18mm wheel spacers rears
15mm wheel spacers fronts

No rub full lock. 18mm in fronts will def. Rub IMO. I’m also considering changing my suspension to something else for more adjustability. Factory MP HAS kit, imo kind of waste of money if you want more low than this.

Note: I’m on MP HAS kit from factory. Maxed out

Looks great! I had MHC lip on order but cancelled out of fear of being low and got a Maxton which I ended up cracking. I still want that MHC!

FYI, I’m on 18mm macht schnell spacers front and rear and do not rub on KW HAS. It’s low but not max low.

[kenairways]

Originally Posted by DrewNewM2

Looks great! I had MHC lip on order but cancelled out of fear of being low and got a Maxton which I ended up cracking. I still want that MHC!

FYI, I’m on 18mm macht schnell spacers front and rear and do not rub on KW HAS. It’s low but not max low.

Great front lip. I did not have any fitment issues. Went up perfect.

I guess I need to give it a try. I’m assuming it would, considering full lock is pretty close. I do know the liners seems to be redesigned from past issues of rubbing. But not sure how true that is from previous year.

[Orange fever]

Originally Posted by Orange fever

Just added some Boom Boom (little boom) !!!
JBL with amp combo. Got dark will clean it up tomorrow before I head out to Vegas or finish it on Monday ///

Originally Posted by Digitalprty

Any issues with rattles?

No rattling since it's not that loud of Bass but just enough ///

[D4VE]

In the Uk our exhausts are strangled by filters, the stock system is really heavy as well. Replacing it with qual length mid and Mperformance titanium back box.