[BroDoze]

I remember a Dukes of Hazard moment I witnessed a few minutes after it happened. Dude had his STI doing about 90mph through a residential area and there was a massive dip that I thought everybody knew about.
He hit that dip, blew out all of his suspension, wheels, engine, radiator and ended up fully airborne over 8-10ft in the air and flew quite a ways into some poor dude’s fence and backyard. Truly impressive feat. I saw oil, coolant, car parts and steam billowing and pulled over to check it all out. Not a good day for anybody, lol. I did not have a smartphone back then, or else I would’ve taken tons of pics and posted them.
I cannot imagine the police report / insurance adjuster/policy etc. Probably got a careless+wreckless ticket combo out of that one.

[Bumpinjeep]

Originally Posted by BroDoze

I remember a Dukes of Hazard moment I witnessed a few minutes after it happened. Dude had his STI doing about 90mph through a residential area and there was a massive dip that I thought everybody knew about.
He hit that dip, blew out all of his suspension, wheels, engine, radiator and ended up fully airborne over 8-10ft in the air and flew quite a ways into some poor dude’s fence and backyard. Truly impressive feat. I saw oil, coolant, car parts and steam billowing and pulled over to check it all out. Not a good day for anybody, lol. I did not have a smartphone back then, or else I would’ve taken tons of pics and posted them.
I cannot imagine the police report / insurance adjuster/policy etc. Probably got a careless+wreckless ticket combo out of that one.

Think of the dudes yard. He would have to get everything replaced. I like to keep my lawn nice and clean so if someone crashed into it, there would be a ton of money spent by their insurance to get it back to 100%.

[Bret]

Originally Posted by 1slowspec3

Cost around $350 shipped.

https://instagram.com/p/C1LlJngOqHU/

It indicates the page isn't available when I click on the link. Is it offered for sale anywhere else besides the Instagram link?

[Info@mad-us.com]

Originally Posted by Bret

It indicates the page isn't available when I click on the link. Is it offered for sale anywhere else besides the Instagram link?

Why pay $350+ ?

We will be back in stock within a few days. https://mad-us.com/mad-bmw-m3-m4-m2-...87-skid-plate/

[tommerf13]

Originally Posted by Info@mad-us.com

Why pay $350+ ?

We will be back in stock within a few days. https://mad-us.com/mad-bmw-m3-m4-m2-...87-skid-plate/

Ship to Ireland?

[Info@mad-us.com]

Originally Posted by tommerf13

Ship to Ireland?

Yes we do!

Insert your shipping details into our checkout system for a quick quote.

[Ronin76]

Originally Posted by Info@mad-us.com

Why pay $350+ ?

We will be back in stock within a few days. https://mad-us.com/mad-bmw-m3-m4-m2-s58-g80-g82-g87-skid-plate/

That’s what I did. Cost the same as Zunsport but the protection of Mishimoto.

[mike@x-ph.com]

Originally Posted by Ronin76

That’s what I did. Cost the same as Zunsport but the protection of Mishimoto.

installed?

[Ronin76]

Originally Posted by mike@x-ph.com

installed?

No…don’t even have the car. Gathering all the items I am going to need to make the car AWESOME!

[mike@x-ph.com]

Originally Posted by Ronin76

No…don’t even have the car. Gathering all the items I am going to need to make the car AWESOME!

thats the way to do it

[HerbDean]

Originally Posted by Chi58

Went airborne and it did a great job,
$199

Do we know what brand this is?

[DD99990]

I had a carbon one installed yesterday. Mainly went for this due to the weight - weight less than a kilo

[mike@x-ph.com]

Originally Posted by DD99990

I had a carbon one installed yesterday. Mainly went for this due to the weight - weight less than a kilo

carbon would not be my first choice for that kind of mode for a lot of reasons, but congrats and please keep us updated on how it holds up

[spurcap]

Off topic question because this thread has the best photos for my question - can someone confirm the large circular area behind the oil cooler screens in these pics (has a big circle hole in the middle of it and 8 small holes around it and has a specific cut out from the aftermarket protection in the picture above this post) is the center jack point for the car?

[Bret]

Originally Posted by spurcap

Off topic question because this thread has the best photos for my question - can someone confirm the large circular area behind the oil cooler screens in these pics (has a big circle hole in the middle of it and 8 small holes around it and has a specific cut out from the aftermarket protection in the picture above this post) is the center jack point for the car?

Yes, that's it. You need to make sure that your car is on level ground. Be sure to use jack pad adapters for the jack stand points behind the front wheels.
https://www.amazon.com/Jack-Adapter-...64&sr=1-1&th=1

[Info@mad-us.com]

Originally Posted by DD99990

I had a carbon one installed yesterday. Mainly went for this due to the weight - weight less than a kilo

Think you missed installing the two large bolts. Without these bolts it's only held up by the body screws.

[Bret]

Info@mad-us.com, Missing the installation of bolts is an example of why you need to include instructions. I could have done the installation in half the time had instructions been included. Instead, I was left to figure it all out as I went. I had no idea that the piece on the front of the radiator had to be removed until I searched the internet to figure out why the skid plate wasn't fitting properly. Why are body screws included that are not needed? Are they a bonus just in case some of the factory ones get broken? What is the proper torque setting for the screws? This is pretty critical when screwing into plastic. I could go on, but the bottom line is that good instructions need to be created and provided. BTW, I'm very satisfied with the quality of the skid plate.