[mike@x-ph.com]

Originally Posted by zmaknojia20

I have just received my midpipe and I did not see the MAD brace in there. I will not install it until I receive confirmation from MAD that the brace is not supposed to included in the box for the RESONATED midpipe.

you should install the MAD brace for the best clearance, if you install it with the stock brace, you need to use washers to create enough clearance

[Info@mad-us.com]

Originally Posted by zmaknojia20

I have just received my midpipe and I did not see the MAD brace in there. I will not install it until I receive confirmation from MAD that the brace is not supposed to included in the box for the RESONATED midpipe.

It’s definitely included! Apologies for the oversight! It seems the brace might have been missed during the hectic Black Friday shipping period.

I believe you already sent us an email? If so, we’ll ensure your brace gets shipped out to you today. Thank you for your patience and I apologize for the inconvenience!

[FAN460]

I just got mine today. I saw a small protrusion on both flanges. Is this concerning? Trying to get an idea before I go under the car. Also, is the cut on the middle dimples for both sides?

Top pic is the higher one.

[FAN460]

I just installed mine today. The fitment is fine, not 100% flush like OEM, but there's no leak. The included brace could be beefier as well. It's not as thick as the OEM. Overall I'm happy with the result. There's almost no volume difference in comfort mode with the valve closed, but it growls in sports mode with the valve open.

Thanks to Good 4 2 reasons for helping me along the process.

[mike@x-ph.com]

Originally Posted by FAN460

I just installed mine today. The fitment is fine, not 100% flush like OEM, but there's no leak. The included brace could be beefier as well. It's not as thick as the OEM. Overall I'm happy with the result. There's almost no volume difference in comfort mode with the valve closed, but it growls in sports mode with the valve open.

Thanks to Good 4 2 reasons for helping me along the process.

Congrats

[Info@mad-us.com]

Originally Posted by FAN460

I just installed mine today. The fitment is fine, not 100% flush like OEM, but there's no leak. The included brace could be beefier as well. It's not as thick as the OEM. Overall I'm happy with the result. There's almost no volume difference in comfort mode with the valve closed, but it growls in sports mode with the valve open.

Thanks to Good 4 2 reasons for helping me along the process.

The flanges look plenty close and tight to me. As long as the gasket is sandwiched between the two flanges you will not get a leak. We do take all the feedback seriously and will be making minor adjustments to make the fit as perfect as possible.

[BIGW0RM]

Originally Posted by Info@mad-us.com

The flanges look plenty close and tight to me. As long as the gasket is sandwiched between the two flanges you will not get a leak. We do take all the feedback seriously and will be making minor adjustments to make the fit as perfect as possible.

That’s awesome. It’s nice to see how active you are on customer feedback. Kudos to you guys for that.

[Info@mad-us.com]

Originally Posted by BIGW0RM

That’s awesome. It’s nice to see how active you are on customer feedback. Kudos to you guys for that.

Appreciate it.