[VegasG42]

Originally Posted by MPR

VegasG42 I bought the $65 kit, and you use I believe all except maybe one small plug. If you go with the No LOC option, you must provide your own LOC, which I did with the LC2i Pro.

Top HiFi (Option 688) Add-a-Sub Harness for RAM/Booster audio systems - T-Harness only/No LOC-150

Nice , thank you. I'm really going to do my best to live with the stock base stereo by adding a subwoofer.

The Bose in my Infiniti is pretty mediocre . But after I added a 12 , i was able to live with it.

Only difference is for the install , I cut and spliced into the factory wiring for the install . Definitely not going that route for the bmw

[VegasG42]

I think I have it all figured out .

Just one more question - Where exactly did you run the ground to (amp ground) ?

[MPR]

Originally Posted by VegasG42

I think I have it all figured out .

Just one more question - Where exactly did you run the ground to (amp ground) ?

Attachment 3309410

Just get an o clamp and find a bolt near the battery

[VegasG42]

Originally Posted by MPR

Just get an o clamp and find a bolt near the battery

Got it , thank you. Just a standard ground to car body.

[VegasG42]

Originally Posted by MPR

Here is my current subwoofer setup. Not sure I'm 100% happy with the amp rack. I do like that it's out of the way, but it isn't secured to the car very well, it's secured using a heavy gauge wire that is secured to the back of the amp rack and runs through the cargo liner panel behind the rack (see pics below) - so it's not going anywhere, but, eh. You can see it behind the amp rack in the first image below. I am trying to avoid cutting/putting holes in anything, except for the pin sized hole in the cargo liner. Still need to do a little more wire organization.

I'm considering either mounting the amp to the sub box, which I've never been a fan of, or building a flat amp rack to sit in front of the subwoofer. But then it's consuming trunk space and may collect more dust/dirt. If anyone has any ideas that avoids drilling/cutting holes into anything, please share.

It is way more bass than I was planning for. The gain on the LC2i is set to output 5V to the RCA's, which is the amps max allowed input, and the amp gain is at around 7 o'clock. The amp does not even get warm to the touch after 1+ hours. Best bang for your buck amp IMO.

• Sundown Audio SA-12 D2 subwoofer (v1, rev3) wired at 1-ohm
• Sundown Audio SFB-1000D amplifier 1000w RMS x 1 @ 1-ohm
• AudioControl LC2i Pro
• Skar ported enclosure, 2 cube feet tuned to 36hz
• Technic PNP plug-n-play harness
• KnuKonceptz 4 awg OFC power wire
• Amp rack built using MDF
• Wire ferrules used on all connections

Sorry to keep bugging you with questions . Might be a dumb question - but the 12V power supply to the LC2i , is it just spliced off of the main 12v power wire from the battery to the Sundown amp ? Did you happen to take any pics of the wiring ? Do you think it would be an issue to just connect the smaller guage power wire directly to the Main Amp power wire? Or do I need some kind of little power connector box ?

Also , I'm assuming the 4 speaker wire high inputs into the LC2i are connected to the TecnicPNP harness ?

[MPR]

Originally Posted by VegasG42

Sorry to keep bugging you with questions . Might be a dumb question - but the 12V power supply to the LC2i , is it just spliced off of the main 12v from the amp to the Sundown amp ? Did you happen to take any pics of the wiring ? Do you think it would be an issue to just connect the smaller guage power wire directly to the Main Amp power wire? Or do I need some kind of little power connector box ?

Also , I'm assuming the 4 speaker wire high inputs into the LC2i are connected to the TecnicPNP harness ?

The TechnicPNP harness has 12v output leads so I used that to power the LC2i. And yes, high output leads from the technicpnp harness go into the LC2i, and the LC2i then gives you low level RCA outputs to go to your amp.

[MPR]

VegasG42 Here’s some pics

[VegasG42]

Originally Posted by MPR

VegasG42 Here’s some pics

PERFECT ! That completely makes sense now. Thank you.

I just ordered the Technic PNP harness and the LC2i Pro.

[MPR]

Originally Posted by VegasG42

PERFECT ! That completely makes sense now. Thank you.

I just ordered the Technic PNP harness and the LC2i Pro.

Cool, you’re going to enjoy it, I am glad I added the amp+sub. Be sure to buy an inline fuse for the LC2i

[MPR]

VegasG42 did you install your sub yet?

[VegasG42]

Originally Posted by MPR

VegasG42 did you install your sub yet?

Yes sir! With your help, your pictures and your links, I was able to install everything perfectly it's actually a fairly easy and simple install, with everything located in the trunk. The hardest part was knowing which wires to use from the harness. And also for whatever reason with the amp that I have, I have to keep the line output converter switch over setting on all the time to keep the subwoofer on all the time even when the volume is very low. But everything works great. Thank you again for your help

[MPR]

Originally Posted by VegasG42

Yes sir! With your help, your pictures and your links, I was able to install everything perfectly it's actually a fairly easy and simple install, with everything located in the trunk. The hardest part was knowing which wires to use from the harness. And also for whatever reason with the amp that I have, I have to keep the line output converter switch over setting on all the time to keep the subwoofer on all the time even when the volume is very low. But everything works great. Thank you again for your help

Do you have any pics of your amp mount?

[VegasG42]

Originally Posted by MPR

Do you have any pics of your amp mount?

No, lol. It's just a very generic basic cheap setup. It's just a Sony 12-in in a non-ported box. With a small Sony amp just big enough to push the 12-in. The amp is just mounted directly to the box, with rubber bushings in between the amp and box.

[dmac@HI]

Thinking about going with the alpha one amp upgrade which has an RCA out for subwoofer amp. I had just planned to go with an 8 or 10 in sub with suitable amp. Where did you access a remote in wire for amp? Is there anything else I should consider in this setup? Will I need to disconnect subs under seat?

[MPR]

Originally Posted by dmac@HI

Thinking about going with the alpha one amp upgrade which has an RCA out for subwoofer amp. I had just planned to go with an 8 or 10 in sub with suitable amp. Where did you access a remote in wire for amp? Is there anything else I should consider in this setup? Will I need to disconnect subs under seat?

I get a remote wire from the LC2i Pro, it detects signal from the audio inputs and knows to send +12v to the remote terminal. So if you are using an LC2i you are good.

[Maxp]

I went to install my TechnicPnP harness yesterday. Had the trunk torn apart and opened the package only to discover I was sent some other harness for a different vehicle. No chance this was going to fit. I waited three weeks for the wrong part to arrive...

[Maxp]

Here are some photos of my 8" JL powered sub install with TechnicPNP harness. I wrapped all the cables with cable tape to have one lead going to the sub. I also bought the heavy duty 3m velcro rectangles and stuck them to the bottom of the sub box. The velcro tape sticks to the trunk lid material and does not move. You have to really tug on it to get it to release, plus it looks much cleaner than anything else I've seen.

[MPR]

Maxp That velcro may result in pulls in your trunk liner, not an issue but it may not look pretty over time. You should pickup a shorter RCA cable.

[Maxp]

Originally Posted by MPR

Maxp That velcro may result in pulls in your trunk liner, not an issue but it may not look pretty over time. You should pickup a shorter RCA cable.

I have removed the system to put in my new car and will pick up a shorter RCA cable. The trunk liner looks completely undamaged. I was concerned about it initially, but if you compare it to brackets and tied tiedowns fastened to the liner there are no holes drilled.

[AdonisP91]

Originally Posted by Maxp

I have removed the system to put in my new car and will pick up a shorter RCA cable. The trunk liner looks completely undamaged. I was concerned about it initially, but if you compare it to brackets and tied tiedowns fastened to the liner there are no holes drilled.

With that Tecnic harness it is all plug and play, no splicing into the factory harness/wires?

[AdonisP91]

Originally Posted by Maxp

I went to install my TechnicPnP harness yesterday. Had the trunk torn apart and opened the package only to discover I was sent some other harness for a different vehicle. No chance this was going to fit. I waited three weeks for the wrong part to arrive...

Just to make sure I order the correct, this is the right part?
https://technicpnp.com/product/hk-op...oster-systems/

[Maxp]

Originally Posted by AdonisP91

Just to make sure I order the correct, this is the right part?
https://technicpnp.com/product/hk-op...oster-systems/

That is the harness I bought and it is supposed to be plug and play.