[sammyj]

Originally Posted by JustinHEMI

Peak Design non-charging car mount with case.

https://www.peakdesign.com/pages/mobile

You can see it in this image.

Shoot, I didn’t realize that the vent mount won’t work . Did you go with adhesive?

[JustinHEMI]

Originally Posted by sammyj

Shoot, I didn’t realize that the vent mount won’t work . Did you go with adhesive?

Yes.

[M2-Bob]

I've been using this Belkin MagSafe Vent mount. I only plug in the charger if i need it.


https://www.amazon.com/Belkin-Compat...87&sr=8-4&th=1

[ttaidapos]

Originally Posted by TorontoRedCoastie

Figured it out. Went with the Rennline BMW G80-G20 Exactfit Magnetic Mount: https://www.rennline.com/bmw-g80-g20...c-phone-mount/

Used a plastic trim tool and seats perfectly.

Thanks everyone!

TorontoRedCoastie is your trim piece on the right not fully in 100% to original seating? Installed exact location like yours but on the left side but can't get the trim piece in 100%. First glance looks ok and it's secured but not the fitment I was expecting at this price point. I also received the new mount which is significantly larger in diameter than your pics and what's on the website. The bracket is just too thick for the trim to seat properly.

Other than this, the bracket has cheap paint on it, if you try to remove it after install, expect to remove the paint. This calls for stripping the paint and applying new 3M tape. Additionally, use some lock tight on the screw as mine got loose trying to position the mount even after tightening fully.

[TorontoRedCoastie]

ttaidapos here’s how it’s seated. I don’t notice anything out of place. I would just ensure where you mounted is not interfering with the trim reconnecting.

[ttaidapos]

Originally Posted by TorontoRedCoastie

ttaidapos here’s how it’s seated. I don’t notice anything out of place. I would just ensure where you mounted is not interfering with the trim reconnecting.

Could be the angle but yours looks like mine, just a bit closer to the edge vs. bring fully recessed. I'll try a few different positions tomorrow. The only other thing I can think of, the bracket is now thicker with the new mount.

[izzyM2]

https://www.pelicanparts.com/cgi-bin...pn=REN-PM01-81

sale at Pelican

[Derko1]

Originally Posted by sammyj

Shoot, I didn’t realize that the vent mount won’t work . Did you go with adhesive?

Why wouldn't the vent work? I have one that is not magsafe and sits the phone in a holder instead and works exactly the same as this one. I just bought two of these that go in the vent. Will post pics when they come in. One for me and one for my wife's car.

[sammyj]

Originally Posted by Derko1

Why wouldn't the vent work? I have one that is not magsafe and sits the phone in a holder instead and works exactly the same as this one. I just bought two of these that go in the vent. Will post pics when they come in. One for me and one for my wife's car.

The peak design one requires 2 horizontal vent slats. Would work in the sides, but not the center.

[MineralGreyMetallic]

Originally Posted by ttaidapos

Could be the angle but yours looks like mine, just a bit closer to the edge vs. bring fully recessed. I'll try a few different positions tomorrow. The only other thing I can think of, the bracket is now thicker with the new mount.

I had the same issue with it leaving a gap. I couldn't find a spot where it wouldn't do that and it bothered me so I uninstalled it.

I emailed Rennline asking if they'd develop a G87 specific mount that would not cause this issue, but they said they are only making stuff for Porsches moving forward.

[ttaidapos]

Originally Posted by MineralGreyMetallic

I had the same issue with it leaving a gap. I couldn't find a spot where it wouldn't do that and it bothered me so I uninstalled it.

I emailed Rennline asking if they'd develop a G87 specific mount that would not cause this issue, but they said they are only making stuff for Porsches moving forward.

I moved it to the driver's side so I didn't see the gap every day lol I wanted a non vent mount and didn't want to forfeit the cup holders either. At first I wasn't thrilled about the larger diameter mount but magsafe standard has changed that thought. So far, happy with the install. Quality still sucks if you ask me, bad paint adhesion and poor quality tape. Both can easily be fixed.

[matt]

Originally Posted by JustinHEMI

Yes.

Do you think that will come off clean after 3years? Asking for my lease company

[dissident111]

Originally Posted by sacowich

Rennline with magnetic charger.

I have same mount but with MagSafe charger. How do you run the cable so it is hidden to usb near cupholder?

[sacowich]

Originally Posted by dissident111

I have same mount but with MagSafe charger. How do you run the cable so it is hidden to usb near cupholder?

I don’t have it looking great. Need to get a shorter cable.

[jmg]

Anything for the 2025 MY yet?

[jmg]

I've been using KUDA mounts for years in all my bimmers and they are, hands down, the best solutions because they do not block any vents. Besides the change to the air vents, is there any design changes to the dash that would prevent this from fitting a 2025 M2? EDIT: Interesting, it says it's for the M2 AND the 3-seres. I wonder if we share the same dash. In that case, my mount from the G82 can be transferred over.

https://www.telefonkonsolen-shop.de/...e-03-2019.html



Here is the KUDA mount in my previous cars:

M4 Interior by JMG, on Flickr

M3 CS Cabin 03 by JMG, on Flickr

[dissident111]

Originally Posted by sacowich

Rennline with magnetic charger.

Same. Best out there for fit I think.

[jmg]

I finally installed my KUDA mount along with a magsafe charger with automatic grips. To me, this is the best solution. The best part was, I already had this mount in my G82, and the G87 shares the same center console and dashboard! It was a perfect fit.

Pros:

• Accommodates almost any cradle including those with built-in Magsafe charging.
• It doesn't block any vents.
• It doesn't block any buttons.
• It doesn't prohibit the use of the cup holders.
• You can open/close the cup holder lid.
• It is track legal hard mounted. (Magnetic mounts alone are not allowed)
• It is within arms reach.
• Does not interfere with the glove box.
• Can be uninstalled with no visible trace.
• The "leather" matches close enough.

Cons:

• It protrudes very very slightly into the passenger area.
• It is hard to get in the USA.

I considered the Rennline, but I do not like how it interferes with the use of the cup holder. Also, it is not track legal since it is only a magnetic mount.

The KUDA mount is available on ebay but international shipping is expensive. They used to have a US distributor, but they have closed shop. This mount is compatible with the G20 and G80, G82, G87.

I do not remember where I got the cradle, but I do like that it "grabs" my phone automatically when it senses it on the magsafe charger. The blue light looks nice at night too.

[mks]

Just adding to the list:

https://g87.bimmerpost.com/forums/sh...13&postcount=5