[IND-Distribution]

     Featured on BIMMERPOST.com

Alpha-N has a reputation for pushing the boundaries of performance and style. With Alpha-N's connection to BMW Motorsport and their track record of producing high-quality carbon parts, their latest G87 M2 components are no exception.

Alpha assembled a comprehensive aero program for the G87 chassis aimed at enhancing both the model's aggressive styling and, more importantly, offering functional parts that delivered measurable aerodynamic improvements and weight reduction.

Starting at the front of the car and following in the steps of their very well-received E92 M3 GTS front lip, the Class 3 adjustable front lip and splitter combination from Alpha-N is built by hand from pre-preg carbon to minimize weight and maximize strength. The lower partition is adjustable and secured to the vehicle with carbon mounting brackets. The adjustability allows easy changes between street friendliness and a downforce-maximized track setup.
















Anyone familiar with Alpha's carbon fenders for the F87-chassis M2 knows that their aero components are truly an exercise of form following function. As aero designs advance and motorsport applications make their way onto road cars, we once again see that Alpha-N is employing a similar design as Porsche for airflow around the front of the car. Much like their previous generation fenders, Alpha's G87 M2 V4 carbon vented front fender set utilize the same louvers and aero blade elements as the new 992 GT3 RS.

As air flows into the left and right coolers in the M2's front bumper and into the wheel wells, thanks to available vented liners, it can then escape out of the front fender louvers as well as the blade openings in front of the doors. The mass evacuation of air from inside the front fenders reduces air pressure, increasing downforce.














Alpha-N's new carbon front 'niere' (German for kidney) grille for the G87 M2 drastically opens up the front end to better match the center bumper grille area. Much like the CSL and GT3 grilles for the G8X M3 and M4, Alpha's G87 carbon grille incorporates a much more aggressive look and is purpose built with a motorsport pedigree.










Like all their hoods, the new carbon vented hood for the G87 M2 is made entirely of carbon fiber with an additional layer Kevlar on the inside, which serves the stability. Taking some queues from their F87 GTS carbon hood and BMW's F87 M2 CS, this vented carbon hood weighs 19lbs, down 7.5lbs from the factory.

Following the full width of the radiator, the vented section is also strategically placed to maximize heat extraction. When combined with Alpha's carbon front grille, you can be certain your M2 will have max airflow and cooling.















Moving to the rear of the car, Alpha-N's new carbon trunk lid for the G87 M2 incorporates BMW's famous CSL ducktail, providing an even more thrilling look while generating additional downforce over the rear axle. Thanks to the carbon construction, it only weighs 11.5lbs vs the 19.5lbs of the factory trunk lid.















Finishing off the aero package at the rear is a 2 part rear diffuser and underbody floor system which also works in combination with Alpha's CSL trunk lid and designed to both increase downforce and reduce drag.




While taking its cues from the G87 M2's existing bodylines, the rear diffuser and underbody floor kit enhance the rear styling to maximum aggression.








Additionally, Alpha-N is offering slightly more reserved front lip options, with their fixed GT and Clubsport versions, as well as vented fenders with varying degrees of aero enhancements.

















The Alpha-N G87 M2 Carbon Aero Package is constructed of full pre-preg carbon fiber in a classic 2x2 weave. The components are as lightweight, stylish, and functional as they come; if you’re in the market for G87 M2 enhanced aerodynamic performance, there are no better parts.

[babym_gen]

One of the best kits out there at the moment.
It would be great to get some numbers for the weight reduction.

[Game]

Please bring this thing by the dealer! Gotta see it in person.

Those fenders are amazing...and what we should have had stock. So according to the pics, there are different variants of them?

[BayAreaBimmers]

I don’t think an aftermarket kit has ever pushed me into purchasing a car before. What a difference! Love the GT3RS fenders and rear. Terrific mods. Off to configure

[10"]

Uh no please don’t. It’s not a GT3 RS; this is like putting M3 fenders on a Civic.

[zero21]

That's a sweet kit but 20k plus paint is steeeep for small aero gain and 30lbs of body weight.

[RoccoVA]

That trunklid is sex.

[JustinHEMI]

Great stuff but I'm too poor.

[TargaM2]

Hood & trunk are ‘must haves’ imo.👍
Forget the Mperf carbon rubbish from BMW & do functional mods like these that actually accomplish something.

[bholler]

Looks great. Nice work!

[Alan l.]

Wow wow wow....... MASSIVE improvement over stock.

Alan

[Tenac]

My order will be placed!

[narudnad]

Vented fenders always give a level of aggressiveness to the car that makes me feel like race car driver lol. Such top notch stuff, bravo! 👏👏

[adc]

And this is how you present a new series of products.

@IND, will you offer pre-painted parts in the standard M2 colors?

[Kevin_The_Clean1]

I love everything about this kit. Except for the fenders. I just cuts way too deep into the factory body lines & looks super aftermarket. The heat extractors on the hood are actually functional. The ribs / fins / grills in the fender are way too flash for my taste & the COD reduction just isn't worth the unnecessary eye ball attention. Just my .02 cents here.

[BMthusiast]

Woosh!!

[KANdaddy]

Look good actually. Still prefer my G80 tho.

[///M TOWN]

Originally Posted by 10"

Uh no please don’t!
It’s not a GT3 RS; this is like putting M3 fenders on a Civic.

💯

[fullyflaredd]

Car still looks like ass but the parts themselves and the quality of them is absolutely amazing. Well done on the presentation of the parts as well. Also, I think E88s on any car automatically makes it look 200% better lol.

Would love to see them make more parts for older platforms (E46, E9X, etc)

I know looks are subjective, but I still don't understand how anyone thinks this car looks good. And sadly it's worse in person. But different strokes for different folks

[Fidiman]

Really love it! The parts seems to be made with good quality and I appreciate the duck tail on the boot following the lines of the car!

Well done Alpha-N!

[Jack@AUTOID]

Alpha-N do not miss!!

Excellent work guys IND-Distribution

[SexyRoger]

I really like how much you can customize and modify this car.
Really nice.