[JABCAT]

Had a little mishap moving cars around in the driveway tonight and clipped my rear bumper against the front bumper corner of my son's Wrangler. Needless to say I need a new rear bumper. Can't seem to find the part # online.

* Edit: I found this part # 51-12-7-887-590. Can anyone confirm? Thanks!

[Tag]

Confirmed

[JABCAT]

Thanks!

[Carefree]

Check with Ali Express for replacement.
Many of these parts are made by the same Chinese vendor and available at prices much lower than OEM.
I think you’ve posted that in prior threads.

[Ronin76]

Originally Posted by carefree

check with ali express for replacement.
Many of these parts are made by the same chinese vendor and available at prices much lower than oem.
I think you’ve posted that in prior threads.

I see what you did there. Well played lol.

[JABCAT]

Originally Posted by Carefree

Check with Ali Express for replacement.
Many of these parts are made by the same Chinese vendor and available at prices much lower than OEM.
I think you’ve posted that in prior threads.

Don't worry, I checked around. I decided to save $200 over what my dealer's Parts Dept wanted. Like I've mentioned before, people are free to overpay for parts

[Carefree]

Originally Posted by JABCAT

Don't worry, I checked around. I decided to save $200 over what my dealer's Parts Dept wanted. Like I've mentioned before, people are free to overpay for parts

Good news.
Invest that $200 in a safe driving course.
Have a great weekend.

[Tag]

Originally Posted by JABCAT

Don't worry, I checked around. I decided to save $200 over what my dealer's Parts Dept wanted. Like I've mentioned before, people are free to overpay for parts

You know, a set of rear reflector inserts cost less than $200. This is the best time to install them too.

The slats IMO look the best, but I get this is subjective.

[JABCAT]

Originally Posted by Tag

You know, a set of rear reflector inserts cost less than $200. This is the best time to install them too.

The slats IMO look the best, but I get this is subjective.

On TR I like the rear end as is (minus the big gouge I put in mine ). Just another data point to convince my wife to build a separate covered parking spot for his Jeep. Also a good lesson for him to see you can't rely on the vehicle's technology as my parking sensors never alerted that I was getting close to his vehicle.

[Tag]

Originally Posted by JABCAT

Also a good lesson for him to see you can't rely on the vehicle's technology as my parking sensors never alerted that I was getting close to his vehicle.

There was just a thread on that very issue.

Parking sensors not activating consistently

[M_Power Rob]

Originally Posted by JABCAT

Don't worry, I checked around. I decided to save $200 over what my dealer's Parts Dept wanted. Like I've mentioned before, people are free to overpay for parts

Then off to Earl Scheib?

[JABCAT]

Originally Posted by M_Power Rob

Then off to Earl Scheib?

I think Maaco is still around. I'll have to check my Yellow Pages

[M_Power Rob]

Originally Posted by JABCAT

I think Maaco is still around. I'll have to check my Yellow Pages

Ah yes, Scheib's competitor...

[Carefree]

Before Maaco and Scheib……………..