[Cohenour]

How much should I be expecting to pay for a removal of the standard spoiler and adding the CF spoiler?

[WarEagleAUB]

Most Shops would probably just charge an hour of labor. Its just removal of 3M tape and applying the new spoiler.

[viewlessfrog]

Bmw dealer quoted me 160 for the work.

[M2 SoCal]

Originally Posted by Cohenour

How much should I be expecting to pay for a removal of the standard spoiler and adding the CF spoiler?

Probably an hour or two. BMW will use the OEM glue FYI which is basically almost impossible to remove without leaving a mark if you ever change your mind. I'd use automotive 3M tape it's really secure
(I did as well)

Here's the vid of my spoiler

2022 BMW M240i (G42) - M Performance Carbon Fiber Rear Spoiler Install 4K

[Cklam1209]

Ive ask a shop i am going to wrap a proof, they charge me 50$ for remove stock spoiler. I think remove is hard to do yourself but install i think it very easy 🤣

[Cklam1209]

Originally Posted by Awtobahn

Probably an hour or two. BMW will use the OEM glue FYI which is basically almost impossible to remove without leaving a mark if you ever change your mind. I'd use automotive 3M tape it's really secure
(I did as well)

Here's the vid of my spoiler

2022 BMW M240i (G42) - M Performance Carbon Fiber Rear Spoiler Install 4K

I have a 3M VHB, is that work for install spoiler ? Ive research on youtube some guy they do VHB and some they just mention 3M and i have no idea what is the best 3M for these things

[M2 SoCal]

Originally Posted by Cklam1209

I have a 3M VHB, is that work for install spoiler ? Ive research on youtube some guy they do VHB and some they just mention 3M and i have no idea what is the best 3M for these things

I recommend automotive 3M specific tape. It's red and labeled accordingly. It's like $20 a roll. Also make sure you use 3M adhesive promoter as well so it bonds to the spoiler better.

[Cklam1209]

Originally Posted by Awtobahn

I recommend automotive 3M specific tape. It's red and labeled accordingly. It's like $20 a roll. Also make sure you use 3M adhesive promoter as well so it bonds to the spoiler better.

When i search on amazon, it give me the same whivh i buy. In discription it mention use for car. It call "heavy duty, double size, VHB". And where did u buy that spoiler ? I see many option in autoID, dont know which one look like your

[Drakos]

I have heard that using thin fishing line is a good way of removing adhesive.

[blue135]

Good way of removing badge, but some adhesive will still need to be removed - typically. an adhesive remover or other solvent.

[fwenky]

Bmw wanted to charge me 130 eur for the install and another 59 eur for their glue kit 🫠😂

Took me about an hour to remove the oem spoiler and clean the trunk by hand and put the new spoiler on.

Piece of cake and cost me 9 eur for some tape

[702MoxyBMW]

Honestly, I wasn't a fan of the tape. the spoiler doesn't have lots of surface area to attach to due to its smaller contact patch. If the back or inside of the spoiler was solid and easier to connect to the trunk lid than I would feel better about it. My 94 nsx spoiler was far more simple than this. Then again, this is mostly a cosmetic thing.

[MPR]

Definitely do it yourself. This isn't like swapping a transmission or replacing a clutch where you need a lift and specialized tools/knowledge, it's s a very basic DIY mod.

[cainzor]

I just did it myself. spent like 10 bucks on 3m tape and 15 bucks on an eraser wheel. took maybe 1.5 hours and i was going super slow because i didnt want to damage the paint. was pretty easy to do honestly.

[aaron_k]

Originally Posted by cainzor

I just did it myself. spent like 10 bucks on 3m tape and 15 bucks on an eraser wheel. took maybe 1.5 hours and i was going super slow because i didnt want to damage the paint. was pretty easy to do honestly.

Just did mine as well! The eraser wheel I a life saver. I was terrified because I had never used one before!