[XC3LLR8]

Originally Posted by JoseSportM

Wish me luck 😅

Let us know how it turns out.

[Prince Thundernight]

You'll have to let us all have the part numbers!

[rockblock]

Originally Posted by ZM240i

...added the Turbo Boost!

Nice - how did you remove the OEM button?

[rockblock]

Originally Posted by Kanola

First time posting here, but it’s been a week now since I’ve bought my new M240i! Attaching some pics, as well as a pic of my first mod, a red start/stop button! I heard it adds 10HP? 😂

how did you pop out the OEM start button?

[XC3LLR8]

Originally Posted by rockblock

how did you pop out the OEM start button?

New button should come with some sticky tape that you roll-up into a ball, press it onto the OEM button, and rapidly lift-up. May take several tries.

[JoseSportM]

Just need to receive the screws I ordered from bmw and that’s it

Job done

[G42UPRA]

I think I'd just trade my whole car in for a 2022 model if I wanted that compartment 😂.

Nice job though!

[XC3LLR8]

Originally Posted by G42UPRA

I think I'd just trade my whole car in for a 2022 model if I wanted that compartment 😂.

Nice job though!

I'd trade it in just for a real dash!

[G42UPRA]

Personally I love the big screen so no going back for me.

[JoseSportM]

I like the new display and the idrive 8 so far.
Even not being allowed to code on 2023 models I would choose the 2023 model again.

This was a 26 usd mod so I would not even bother if would not work, but before I cut the dash I Cheked the dimensions from the interior, not to have a surprise ✌️😀

[rockblock]

Originally Posted by XC3LLR8

New button should come with some sticky tape that you roll-up into a ball, press it onto the OEM button, and rapidly lift-up. May take several tries.

OK thanks - will give it a try...and the new one I assume you press and it just snaps right in

[XC3LLR8]

Originally Posted by rockblock

OK thanks - will give it a try...and the new one I assume you press and it just snaps right in

Exactly

[Nate48]

Purchased the Gloss Black Front Splitter and side Winglets from Autoid!

I already have the M Performance Carbon spoiler on my build. $618 from BMW was totally reasonable. The other Carbon parts… yikes. The gloss black gives the same look as the M Performance options, and WAAAAAAY cheaper. Especially knowing they will get beat up anyways. I’ll take $422 vs $3,323 all day long.

[cannockwolf]

Originally Posted by Nate48

I already have the M Performance Carbon spoiler on my build. $618 from BMW was totally reasonable.

I got mine for £315 from SSDD but i think they priced it wrong by accident as after I bought it it went up to £530

[JoeyJoeJo]

Originally Posted by Nate48

Purchased the Gloss Black Front Splitter and side Winglets from Autoid!

Would be interested in your thoughts on the gloss black parts when they arrive, have seen mixed comments and I'm not looking to have CF on the exterior.

[ZM240i]

Originally Posted by rockblock

Nice - how did you remove the OEM button?

The red button came with a clay-type of a sticky goo. Just firmly cover the OEM button with the clay and pull straight up FAST WITH AUTHORITY. Easy peasy.

[Nate48]

Originally Posted by JoeyJoeJo

Would be interested in your thoughts on the gloss black parts when they arrive, have seen mixed comments and I'm not looking to have CF on the exterior.

I'll post some pics of the parts after they arrive early next week.

Once my car arrives (Hopefully mid to late June) I'll definitely post some pics with them installed.

[ZM240i]

Originally Posted by Nate48

Purchased the Gloss Black Front Splitter and side Winglets from Autoid!

How is the installation for the side winglets?
Is there drilling involved?

[JoeyJoeJo]

Originally Posted by ZM240i

How is the installation for the side winglets?
Is there drilling involved?

They are the same shape as the MP and that needs 5 holes so I'd assume so, the manual mentions using a 5mm drill stop to prevent damage underneath and that would terrify me!!

Edit to correct, it was the CF ones are the same, I'd been looking at them in a different tab, the gloss black seem solid.

[JoseSportM]

Originally Posted by JoeyJoeJo

They are the same shape as the MP and that needs 5 holes so I'd assume so, the manual mentions using a 5mm drill stop to prevent damage underneath and that would terrify me!!

Edit to correct, it was the CF ones are the same, I'd been looking at them in a different tab, the gloss black seem solid.

The black winglets from AutoID are not a replica from MPerformance and as tre winglets in carbon. Shape is different, similar but if you pay attention Design is not the same. And they don’t have 5 holes.

Check again because that was something that lead me to not buy them.

[blueshead]

Originally Posted by JoseSportM

Wish me luck 😅

Is this an OEM part?
Anybody aware of a RHD version of the pocket?

[JoseSportM]

Originally Posted by blueshead

Is this an OEM part?
Anybody aware of a RHD version of the pocket?

Yes, G20 part. 16usd on Ebay plus shipping