[LeggoRacing]

I just seen a video of the new milltek single midpipe. It looks pretty beefy and sounds nice. I'm curious if anyone has feedback on one yet? (might be too soon)

[mike@x-ph.com]

sub'd for feedback

[tom @ eas]

Originally Posted by LeggoRacing

I just seen a video of the new milltek single midpipe. It looks pretty beefy and sounds nice. I'm curious if anyone has feedback on one yet? (might be too soon)

We're installed one of the new Milltek systems with a non-resonated midpipe, fitment was on point and sounded great.

You can see more photos on our showroom thread here:

https://g87.bimmerpost.com/forums/sh...7&postcount=32

[LeggoRacing]

Originally Posted by mike@x-ph.com

sub'd for feedback

Well I reached out for more info. Seems like it’s only the short portion directly off of the downpipes and not all the way back to the axle back. Seems interesting to pinch it back down so soon when others go most of the way to the box

[garybnsp]

Got one on order already have the milltek axle back. 15percent off if you order before April 15th, contact Frankie at milltek

[Geighty7]

Originally Posted by LeggoRacing

I just seen a video of the new milltek single midpipe. It looks pretty beefy and sounds nice. I'm curious if anyone has feedback on one yet? (might be too soon)

https://www.youtube.com/watch?v=5bFdHQxZZ4c&t=483s

They just released this. Considering swapping my current Milltek mids for this just to try it out plus price entry point can’t be beat.

I’d probably run just the single and not X.

As Tom said above, I currently have a full Milltek system. I love it. Super aggressive valves open.

[LeggoRacing]

Talking more with autoID my last message was wrong. The system connects all the way to rear box vs just being the front section. Oops. I like how beefy the system looks vs the others. Deciding if the 200 price difference due to shipping is worth it over the IRL

[Info@mad-us.com]

Originally Posted by LeggoRacing

Talking more with autoID my last message was wrong. The system connects all the way to rear box vs just being the front section. Oops. I like how beefy the system looks vs the others. Deciding if the 200 price difference due to shipping is worth it over the IRL

I would say no. The only difference I see is a 3.9'' single section vs the typical 3.5''. The rest of the pipe diameters are factory diameter.

Being that there are tons of cars in the 750-800 range and a small handful of cars in the 900-1000 hp range running 3.5 single midpipes i don't see how much worth an additional $200 unless you just like the brand or how it looks.

Our Mid pipe will under $1000 with the forum coupon code

[M2Sky]

Originally Posted by Geighty7

As Tom said above, I currently have a full Milltek system. I love it. Super aggressive valves open.

I have one too. It’s silly loud open, sounds great higher up but floor it too low and it sounds awful but I guess that’s just the engine and not the exhaust. Everyone’s after these centre pipes and here’s me asking miltek for a less restrictive centre resonator 😂

[brit.milltek]

We are taking mine (US Spec) to the dyno this Friday to run it with all of our available options + stock to get some actual data on it I'll be happy to share the results in here once we have them!

[mike@x-ph.com]

Originally Posted by brit.milltek

We are taking mine (US Spec) to the dyno this Friday to run it with all of our available options + stock to get some actual data on it I'll be happy to share the results in here once we have them!

[tom @ eas]

Originally Posted by brit.milltek

We are taking mine (US Spec) to the dyno this Friday to run it with all of our available options + stock to get some actual data on it I'll be happy to share the results in here once we have them!

Looking forward to it.

[myaghi]

I also order a Milltek Single Midpipe Resonated from Autoid UK. They expect it to come in stock mid May. Also in EU we have to remove the OPF so I have to install the Leib OPF Deleter kit.
I will report back after the instalation..I have big hopes from it

[mike@x-ph.com]

Originally Posted by myaghi

I also order a Milltek Single Midpipe Resonated from Autoid UK. They expect it to come in stock mid May. Also in EU we have to remove the OPF so I have to install the Leib OPF Deleter kit.
I will report back after the instalation..I have big hopes from it

[wrh3]

Just received mine today, might be a few weeks before I'm able to install it. Came well packed....shipped from TN. Kind of odd that a while after I purchased AutoID sent a price adjustment invoice that made the price all-in a good bit higher than XPH, in retrospect and in the future XPH will probably get my business.

[mike@x-ph.com]

Originally Posted by wrh3

Just received mine today, might be a few weeks before I'm able to install it. Came well packed....

Congrats

[wrh3]

Originally Posted by mike@x-ph.com

Congrats

Thanks Mike, you'll get my business next time.....my first experience with AutoID was not great.

[mike@x-ph.com]

Originally Posted by wrh3

Thanks Mike, you'll get my business next time.....my first experience with AutoID was not great.

Thank you

[Sp2pilot]

Originally Posted by mike@x-ph.com

sub'd for feedback

Do you happen to know if Miltek will be making a single like this for the G80, or if this will fit? I sent Miltek an email a couple weeks ago, but never got a response.

[tom @ eas]

Originally Posted by wrh3

Just received mine today, might be a few weeks before I'm able to install it. Came well packed....shipped from TN. Kind of odd that a while after I purchased AutoID sent a price adjustment invoice that made the price all-in a good bit higher than XPH, in retrospect and in the future XPH will probably get my business.

Be sure to check our site as well, as we generally keep these in stock.

[myaghi]

Just received my Milltek resonated single midpipe and OPF deleters. Does anyone know the torque spec for the bolt between the downpipes and midpipe?

And some sort of install guide would be helpfull, because my seller doesn't have one and told me to look on youtube )

The midpipe si not very difficult to figure out, but the OPF deleters are not so easy to install corectly

[brad65ford]

Looking for a single mid pipe myself or our G87 M2, normally support and purchase with Mike. Not seeing this option there also some pipes are out of stock. What do you guys suggest?