08-15-2024, 01:12 PM | #1 |
New Member
3
Rep 5
Posts |
G87 coilovers: Ohlins vs. KW
I haven’t seen any posts comparing true coilover upgrades. I’m particularly interested in hearing from the race community about your experiences and opinions on the coilover options out there
I’m particularly interested in Ohlins and KW. Has anyone tried these? Or better yet, has anyone compared them? |
08-15-2024, 02:16 PM | #2 | |
First Lieutenant
663
Rep 358
Posts |
Quote:
To step up to a true coilover meant for the track check out MCS or JRZ. They are rebuildable and have remote canisters. They can be 2, 3, or 4-way. All the adjustments are under the hood or in the trunk except for my rear rebound. They are not cheap though. Nitron and KW V4/V5 are some other options. Nitron is developing a system that uses the car's EDC to make some (or all?) of the adjustments and I think KW still uses a divorced setup and the adjustments are by the wheel. I don't know much about them to be honest. Here is a link to the MCS 3-ways that I installed on my G87: https://g87.bimmerpost.com/forums/sh....php?t=2081879
__________________
2022 M850i
2023 M2; MCS 3-way coilover, Vorshlag Camber plates, 19" Apex VS-5RS, 305 Goodyear 3R, SPL links, Adro wing, IRL exhaust, Racechip, Verus Splitter; IG:g87_43 Last edited by ZPD; 08-15-2024 at 02:44 PM.. |
|
Appreciate
0
|
08-15-2024, 02:16 PM | #3 |
Private First Class
222
Rep 134
Posts |
KW is more of a street coilover unless you spring for their higher end versions. Ohlins would be a better choice between the two. Really comes down to your use case. If a fun street car either would be suitable A friend had kw v3 on his g80. Rode great on street but overall was too soft for track and bent one of the struts/piston as they’re much thinner than others. He repaired and replaced with MCs 3 ways
If mostly track car I’d spring for a real motorsports setup - nitron , jrz ,MCS, etc. more cost but more reliability. A lot of factors at play around this. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|