[JHole]

Originally Posted by JABCAT

You can see from the underside pics on the first page how it attaches. It won't interfere with the skid plate.

I saw the pics and I appreciate your response, but I'm asking if anyone installed it with the Mishi skid plate.

[apez]

Originally Posted by JHole

I saw the pics and I appreciate your response, but I'm asking if anyone installed it with the Mishi skid plate.

I did, no problem.

[JHole]

Originally Posted by apez

I did, no problem.

Thanks.

[Libbert22]

Just bought one of these. On sale right now for $169.99 with free shipping

[Ehloo]

just ordered mine. with the sale and free shipping it’s worth a shot. i had my mind up with the light weight front lip but just couldn’t get myself to spend 800 on piece a plastic.

[sclui56]

Originally Posted by Ehloo

just ordered mine. with the sale and free shipping it’s worth a shot. i had my mind up with the light weight front lip but just couldn’t get myself to spend 800 on piece a plastic.

Same boat, mine came in today. I like the simplicity of the EAS LW but not @4x on something I could destroy and need replacement.

[izzyM2]

People see my lip and they think it's an expensive one. It really is a great lip specially for the money. I can't wait for them to come out with side skirts.

[Ehloo]

how long did it take to ship? i haven’t got a notice of shipping since i ordered and its coming from socal to norcal. usually no longer than 2 days

Originally Posted by sclui56

Same boat, mine came in today. I like the simplicity of the EAS LW but not @4x on something I could destroy and need replacement.

[sclui56]

Originally Posted by Ehloo

how long did it take to ship? i haven’t got a notice of shipping since i ordered and its coming from socal to norcal. usually no longer than 2 days

Ordered 10.07
Ship Notice 10.08
Rec'd 10.09

Am in SoCal

[izzyM2]

They re usually very good with shipping out items and communicating with customers.

Their direct contact is: sales@aeroflowdynamics.com

Include your order number and they should get back to you right away.

[dissident111]

How was the install? Just got mine today and I only want to use the pre drilled factory locations to mount it and the 3M on it. I don’t want to self tap more screws and saw someone else did this way and it has been sturdy.

[dissident111]

Got it installed really easy and very good for the price.

[sclui56]

Did you end up skipping the front row of screws? Will probably do mine tomorrow.

[dissident111]

Originally Posted by sclui56

Did you end up skipping the front row of screws? Will probably do mine tomorrow.

Yes, I only did the factory locations so 3 for each side and four in the front. Then the 2 for each to connect the 3 pieces. The 3M sticks really good as well. It seems to be on very well and don’t see why you would need to use the self tapping screws.

[BroDoze]

You guys are crazy relying on just the tape…

If the splitter actually does its job and provides downforce, you’re going to wish you used the screws.

[dissident111]

Originally Posted by BroDoze

You guys are crazy relying on just the tape…

If the splitter actually does its job and provides downforce, you’re going to wish you used the screws.

It is screwed in and 3M tape. I just didn’t add more self tapping screws. I see from a lot of people that installed it they did the same and have had no issues. If I feel it isn’t enough after some driving I can always go add them later.

[sclui56]

First of all, thanks to JABCAT for testing the water. Started mounting mine and just waiting to seat all the pieces before deciding on the additional screws. I don't think I would need them depending how the 2 sides cure, My center 4 bolts will be going into nutserts from the Mishimoto plate.

Had to redo the front section of the VHB just like JABCAT indicated (easily seen on my sample). Can't beat this for the money, yes, paint is so so; it's one of those things we think we can do better, but why since it's already there. Fitment is good save for the dimple marks from the mold.

I am happy now that the void in the front looks more complete.

[JABCAT]

Originally Posted by sclui56

First of all, thanks to JABCAT for testing the water. Started mounting mine and just waiting to seat all the pieces before deciding on the additional screws. I don't think I would need them depending how the 2 sides cure, My center 4 bolts will be going into nutserts from the Mishimoto plate.

Had to redo the front section of the VHB just like JABCAT indicated (easily seen on my sample). Can't beat this for the money, yes, paint is so so; it's one of those things we think we can do better, but why since it's already there. Fitment is good save for the dimple marks from the mold.

I am happy now that the void in the front looks more complete.

[Ehloo]

installed mine today. i would say fitment is excellent for an aftermarket part and especially at this price. I did end up throwing some PPF on it. I did it myself and not sure i would pay someone to do it. The ppf more than anything covers a lot of swirls marks from the gloss black and any future swirls. stuff scratches very easy.

if you have a little know how i say ppf it yourself.

install was simple, i did replace all the tape with vhb and wider tape. did not use the self tap screws and it fees pretty sturdy.

let’s be honest though for those that bought it. its a 200 part. no issue with that and dont feel like i overpaid. the issue is all the other options should be significantly less.

[BroDoze]

Got mine installed tonight too. Looks killer. I’ll post pics soon.

[apez]

Originally Posted by Ehloo

let’s be honest though for those that bought it. its a 200 part. no issue with that and dont feel like i overpaid. the issue is all the other options should be significantly less.

Definitely this. I am sure a lot of the carbon pieces feel and look higher quality. But for $200 (or less) on such a high wear area of the car? I highly recommend.

[BroDoze]

Love the lip!