[WilcoJunoHotel]

Yes, I saw that the M2, M3 and M340i have a similar setup with the ZTK.

I would have been completely happy to not have that cooler like it appears BMW did for the Euro versions? To me, it is a huge liability for such as small percentage of customers who will actually benefit from the cooler.

In the video below, go to about 13:13 for a look underneath the car - no front oil cooler but the car does appear to have the same ZTK tires/wheels/brakes/rotors as our US cars. I wonder why.

[G42UPRA]

Originally Posted by sclui56

Just redid my daughter's plate today due to an annoying vibration sound caused by the plate too close. Since Turner wanted us to reuse the factory bolt to hold the 2 brackets, the thread became insufficient even before adding washers. I bought some washers first and ended up buying some longer 10.9 shoulder bolts to accomplish this.

Man I've been trying to figure out where my annoying vibration/rattle is for weeks. I think I'm having exactly this issue.

Going to follow what you did in the thread. Thanks!

[Mike_H_]

Originally Posted by G42UPRA

Going to follow what you did in the thread. Thanks!

I had the same, switched to M10 rubber spacers worked great.

If you decide to use rubber spacers, the larger rubber spacer will also require M10-1.5 x 40mm Flanged Hex Head Bolts.