[G42.Drxw]

Can we fit the stock wheels on the new M2 on the our car? Or would the offset and the size cause rubbing issues?

[seanyx11]

Subscribed…wondering the same thing about what will fit on my M240i

[M-System]

The G series M2, M3 and M4 offset for the rears is too low for G42, so being 10.5” wide they poke out a lot and will definitely rub. But, you can run a square set of all fronts 9.5”, with a 255/40 front - 265/35 rear tires. Rears will be really flush as the offset difference would be like running a 20mm spacer.

[G42.Drxw]

Originally Posted by M-System

The G series M2, M3 and M4 offset for the rears is too low for G42, so being 10.5” wide they poke out a lot and will definitely rub. But, you can run a square set of all fronts 9.5”, with a 255/40 front - 265/35 rear tires. Rears will be really flush as the offset difference would be like running a 20mm spacer.

Are you on stock suspension? I do wanna lower the car on springs but looks like it might rub with 9.5 265/35

[M-System]

Originally Posted by G42.Drxw

Are you on stock suspension? I do wanna lower the car on springs but looks like it might rub with 9.5 265/35

Yes, I'm on stock suspension. And I agree that if you are going to lower the car, 265s will probably rub. With the +20 offset M wheels, it's technically like running a 7mm spacer up front, and a 20mm spacer at rear (G42 offsets 27 front, 40 rear). When I did this test fit, I could see that the 9.5" fronts would clear the fenders if mounted at the rear with the 265s, but would be very flush, and definitely rub if lowered.
You could run 255/40 square, (just not with a runflat tire) but it's possible you could still have rubbing issues at the rear if lowered.

[Nate48]

Originally Posted by M-System

The G series M2, M3 and M4 offset for the rears is too low for G42, so being 10.5” wide they poke out a lot and will definitely rub. But, you can run a square set of all fronts 9.5”, with a 255/40 front - 265/35 rear tires. Rears will be really flush as the offset difference would be like running a 20mm spacer.

Do you have any pics from the side so we can see how much they poke out?

I would love to try and run a square setup with the 9.5 Fronts of these 930M's or the M3/M4 826M's.

[Baby_G42M]

Originally Posted by M-System

The G series M2, M3 and M4 offset for the rears is too low for G42, so being 10.5” wide they poke out a lot and will definitely rub. But, you can run a square set of all fronts 9.5”, with a 255/40 front - 265/35 rear tires. Rears will be really flush as the offset difference would be like running a 20mm spacer.

If I don’t plan on lowering the car running the 265/35 square set up all 9.5”. Would I have any issue with fittment or rubbing?
Thinking of running 826M wheels

[NoDramaG42]

Originally Posted by Baby_G42M

If I don’t plan on lowering the car running the 265/35 square set up all 9.5”. Would I have any issue with fittment or rubbing?
Thinking of running 826M wheels

It would depend on the offset.
At +25 offset you'll definitely be OK.
Lower offset that that is uncharted territory.

[Maxp]

Originally Posted by M-System

Yes, I'm on stock suspension. And I agree that if you are going to lower the car, 265s will probably rub. With the +20 offset M wheels, it's technically like running a 7mm spacer up front, and a 20mm spacer at rear (G42 offsets 27 front, 40 rear). When I did this test fit, I could see that the 9.5" fronts would clear the fenders if mounted at the rear with the 265s, but would be very flush, and definitely rub if lowered.
You could run 255/40 square, (just not with a runflat tire) but it's possible you could still have rubbing issues at the rear if lowered.

Did you keep the 930m wheels on your m240? If so, can you tell me how you like driving the car with a square 9.5 setup vs the stock staggered setup? I really want to get the 826m fronts for all 4 of my wheels, but I don't want to purchase without some feedback from someone who has driven with the 9.5 et 20 wheels. Thank you

[AdonisP91]

Originally Posted by Baby_G42M

If I don’t plan on lowering the car running the 265/35 square set up all 9.5”. Would I have any issue with fittment or rubbing?
Thinking of running 826M wheels

I’m thinking of the same thing, did you find out if it works? I’d be ok with 255/35 as well.

[AdonisP91]

Originally Posted by Maxp

Did you keep the 930m wheels on your m240? If so, can you tell me how you like driving the car with a square 9.5 setup vs the stock staggered setup? I really want to get the 826m fronts for all 4 of my wheels, but I don't want to purchase without some feedback from someone who has driven with the 9.5 et 20 wheels. Thank you

I’m in the exact same position as you. I want to do this but don’t want to be the first to try it.

[G42.Drxw]

Originally Posted by AdonisP91

I’m in the exact same position as you. I want to do this but don’t want to be the first to try it.

i ran the 19.5 265/30 squared lowered

[AdonisP91]

Originally Posted by G42.Drxw

i ran the 19.5 265/30 squared lowered

With the 826m front wheels?

[G42.Drxw]

Originally Posted by AdonisP91

With the 826m front wheels?

yes sir

[AdonisP91]

Originally Posted by G42.Drxw

yes sir

That’s really helpful, thanks. I saw from one of your threads you only ran them for a few months, did you run into any issues that made you change your mind? I like the wheels but am a little worried about the et20 fitment on the rears. You seem to be one of the only one’s who has actually tried this, so your feedback is really appreciated.

[joghasg42]

wondering the same with the 825m wheels staggered setup. i’m not lowered but I’m still worried abt the rears fitting

[TheStoka]

I’m interested in the square 19” 827M as I prefer the look and they can be got from BMW for a better price than the 826M or 825M.

Want to target 255/35 square so I can run the MPS4S* on these. Just worried as the car is on lowering springs. Don’t really see the benefits of going to a staggered 255/40 front - 265/35 rear.

Personal note would avoid the 930m as these are not forged and around 3kg heavier than the 825m of same size.