[yoon_209]

Looking at vorshlag, millway and ground control. My cars front camber is not equal after lowering on HR VTF (surprise LOL). Want plates to fix this.

Any reviews of any of these plates?

[tom @ eas]

Originally Posted by yoon_209

Looking at vorshlag, millway and ground control. My cars front camber is not equal after lowering on HR VTF (surprise LOL). Want plates to fix this.

Any reviews of any of these plates?

Other brands might be easier to obtain, but we still go out of our way to import/stock Millway. They make fantastic parts.

[yoon_209]

Originally Posted by tom @ eas

Other brands might be easier to obtain, but we still go out of our way to import/stock Millway. They make fantastic parts.

Can you provide any insight as to why you recommend Millway over the others? Very interesting thread regarding experiences with Millway.

https://g87.bimmerpost.com/forums/sh...1#post31014011

[tom @ eas]

Originally Posted by yoon_209

Can you provide any insight as to why you recommend Millway over the others? Very interesting thread regarding experiences with Millway.

https://g87.bimmerpost.com/forums/sh...1#post31014011

Those look like they were damaged from over-torquing or impacted into place.

The good part is having the camber plates designed to have those threadnuts replaceable, as only the inserts need replacement and not the entire camber plate. That's forward thinking.

[tylerdurdem]

I have Vorshlag, no complaints.

[M_Power Rob]

Originally Posted by yoon_209

Looking at vorshlag, millway and ground control. My cars front camber is not equal after lowering on HR VTF (surprise LOL). Want plates to fix this.

Any reviews of any of these plates?

Honestly haven't heard of H&R's causing this issue...sure the place you took it to didn't have an issue with their alignment?

[yoon_209]

Originally Posted by tylerdurdem

I have Vorshlag, no complaints.

any issues with clicking or noise?

[tylerdurdem]

Originally Posted by yoon_209

any issues with clicking or noise?

Nope.

[Ehloo]

not understanding fully the point of camber plates. from what i understand you can adjust camber. i would personally like to adjust my front camber and bring the wheels back out. less camber. Would camber plates achieve that or just add more negative camber

[yoon_209]

Originally Posted by Ehloo

not understanding fully the point of camber plates. from what i understand you can adjust camber. i would personally like to adjust my front camber and bring the wheels back out. less camber. Would camber plates achieve that or just add more negative camber

you cannot adjust camber on the stock strut of the fronts. Camber plates allow you too

[youloze]

Not trying to hijack the thread, but do any companies make an adjustable control arm to adjust camber in the front? I've Googled and looked around, but haven't found any. I'd rather have adjustable arms than camber plates.

[IanH]

Unequal camber in the front usually means subframe off center. Did they try to fix it that way? (This was my experience on other cars at least)

[Ehloo]

figured that and might be going this out. too much camber in the front and wheel fitment doesn’t look right. was going spend some money on a 5mm spacer but the camber plates seem like a better option

i am reading not all springs work with certain plates. i have AST Has. anybody know which plates work

Originally Posted by yoon_209

you cannot adjust camber on the stock strut of the fronts. Camber plates allow you too

[yoon_209]

Originally Posted by Ehloo

figured that and might be going this out. too much camber in the front and wheel fitment doesn’t look right. was going spend some money on a 5mm spacer but the camber plates seem like a better option

i am reading not all springs work with certain plates. i have AST Has. anybody know which plates work

Gotta do some research man…

[LeggoRacing]

If springs are meant to work with stock hardware then milway plates will work

[Xspeedracer]

Originally Posted by youloze

Not trying to hijack the thread, but do any companies make an adjustable control arm to adjust camber in the front? I've Googled and looked around, but haven't found any. I'd rather have adjustable arms than camber plates.

https://www.splparts.com/g8x-m3-m4-2022/ but you better know what your doing and have the car on a alignment rack to make changes it can be very time consuming

[youloze]

Originally Posted by Xspeedracer

https://www.splparts.com/g8x-m3-m4-2022/ but you better know what your doing and have the car on a alignment rack to make changes it can be very time consuming

Thanks! Steep, but I have SPL on my other car and they are top notch.