Are the iSweep Brake Pads worth it?

Ronin76 · 11-14-2024, 01:31 PM

Quote:

Originally Posted by BroDoze

Go price out the stock pads

I don’t know why I am asking but, how much are they? Closing my eyes in fear while waiting your response lol.

JABCAT · 11-14-2024, 08:11 PM

Quote:

Originally Posted by Ronin76

I don’t know why I am asking but, how much are they? Closing my eyes in fear while waiting your response lol.

About $800 for front & rear.

Bret · 11-14-2024, 08:36 PM

Ronin76 · 11-14-2024, 09:14 PM

Quote:

Originally Posted by Carefree

I paid a little over $600.

For OEM?

BIGW0RM · 11-15-2024, 12:41 AM

Quote:

Originally Posted by Ronin76

Yeah they ain’t cheap

Quote:

Originally Posted by Bret

Goodness. These are the most expensive brake pads that I've ever needed to purchase. Since my M2 has less than 1,500 miles on it, can I get away with not replacing the brake wear sensor?

Yes you can. And I’d get the 2000’s. The lack of dust is huge. Even with the 2000’s.

IanH · 11-15-2024, 06:05 AM

I have to make a correction, i had to go look at my receipts from a long time ago. I have run the 2000's not the 1500's

They worked great on the street.

BIGW0RM · 11-15-2024, 07:40 AM

Quote:

Originally Posted by IanH

I have to make a correction, i had to go look at my receipts from a long time ago. I have run the 2000's not the 1500's

They worked great on the street.

Nice. 2000’s are the ones to get IMO.

Ronin76 · 11-15-2024, 10:11 AM

Quote:

Originally Posted by BIGW0RM

Nice. 2000’s are the ones to get IMO.

BIGW0RM now you got me second guessing on the 1500s. Maybe pay a bit more for the 2000s? Damn it!

IanH · 11-15-2024, 10:13 AM

Quote:

Originally Posted by Ronin76

BIGW0RM now you got me second guessing on the 1500s. Maybe pay a bit more for the 2000s? Damn it!

So, I heavily apologize that I was talking about the 2000's the whole time. I didnt remember from that long ago (2017)

The 2000's are definitely streetable though, no downsides and better than the 1500.

Ronin76 · 11-15-2024, 10:15 AM

Quote:

Originally Posted by IanH

So, I heavily apologize that I was talking about the 2000's the whole time. I didnt remember from that long ago (2017)

The 2000's are definitely streetable though, no downsides and better than the 1500.

No worries my man.

ourlee · 11-15-2024, 11:36 AM

I’m hoping my dealer will install the 1500s and a Mishimoto as part of my deal.

Ronin76 · 11-15-2024, 11:56 AM

Quote:

Originally Posted by ourlee

I’m hoping my dealer will install the 1500s and a Mishimoto as part of my deal.

Yeah, I have already asked but the oil cooler guard. Will see how it plays out. My SA said it shouldn’t be a problem to have it installed on the day of delivery. I don’t mind paying for it but if it is ridiculously expensive I will just take it to my indie shop. They specialize on German cars.

Bret · 11-15-2024, 01:39 PM

I decided to wait until after the 1,200-mile break-in to install replacement pads because I wanted to make sure that everything was working correctly from the factory. I wanted to avoid the possibility of something being wrong with the brakes from the factory, but BMW blaming it on the replacement pads.

TallGibbs · 11-15-2024, 02:16 PM

Quote:

Originally Posted by Ronin76

Yeah, I have already asked but the oil cooler guard. Will see how it plays out. My SA said it shouldn’t be a problem to have it installed on the day of delivery. I don’t mind paying for it but if it is ridiculously expensive I will just take it to my indie shop. They specialize on German cars.

The skid plate install should take your shop less than 1 hour to install (more like 20 minutes if they do proper research before, or if they've installed one before). Quite an easy installation, speaking first hand (especially if you have access to a lift)

IanH · 11-15-2024, 02:28 PM

Was just watching a video on youtube where this guy got completely shafted on warranty issue with his brakes because he replaced the pads before the rotor problem showed itself.

A good idea to make sure the car is in good status before you do non-reversible mods.

JABCAT · 11-15-2024, 08:07 PM

Quote:

Originally Posted by IanH

Was just watching a video on youtube where this guy got completely shafted on warranty issue with his brakes because he replaced the pads before the rotor problem showed itself.

A good idea to make sure the car is in good status before you do non-reversible mods.

There was no warranty issue because as he stated he put original pads on and it fixed the issue he was experiencing. Obviously the issue was the aftermarket pads he installed. He tried to make it into a bigger issue than it was (for clicks), as evidenced by "now the car has wheels & and aero kit, don't know what they dealership will say...". They'll say nothing because those things have no bearing on the warranty.

JABCAT · 11-15-2024, 08:09 PM

Quote:

Originally Posted by TallGibbs

The skid plate install should take your shop less than 1 hour to install (more like 20 minutes if they do proper research before, or if they've installed one before). Quite an easy installation, speaking first hand (especially if you have access to a lift)

It should take less than 10 min & not something I would pay anyone to do. A decent dealer would throw it on as part of the PDI.

Ehloo · 11-16-2024, 11:08 PM

i am starting to get some clunking noises from the brakes. hard to explain then they do but usually when at a full stop and start moving. it’s not always but it’s like thump. i have read this is someone normal for brakes but nobody mentioned this with the isweep. didn’t have the issue with my stock brakes.

i did use caliper grease but maybe not enough or in the right place?

JABCAT · 11-17-2024, 09:56 PM

Quote:

Originally Posted by Ehloo

i am starting to get some clunking noises from the brakes. hard to explain then they do but usually when at a full stop and start moving. it’s not always but it’s like thump. i have read this is someone normal for brakes but nobody mentioned this with the isweep. didn’t have the issue with my stock brakes.

i did use caliper grease but maybe not enough or in the right place?

I have a combined 34k mi with the iSweep pads on two vehicles, no clunking or noises of any kind. Double check all the caliper bolts.

BIGW0RM · 11-18-2024, 10:09 AM

I had no clunking with isweeps while they where on my M3. Not a single sound from them.

Ehloo · Yesterday, 01:43 AM

guess it’s hit or miss. my isweep dealer mentioned isweep came by from Japan and dropped off a bunch of new grease. a thicker formula which makes me assume others are having issues and they are aware of it. i will be trying some and hopefully it helps. have to basically re-install the pads to grease them

11-14-2024, 08:36 PM	#47
Bret Private First Class 187 Rep 117 Posts Drives: 2017 Jaguar F-Type Join Date: Jul 2024 Location: Georgia, USA iTrader: (0)
	Appreciate 0 Quote

11-15-2024, 06:05 AM	#50
IanH Second Lieutenant 292 Rep 287 Posts Drives: '25 M240xi Join Date: Dec 2012 Location: United States iTrader: (1) Garage List '25 BMW M240i Xdrive [0.00]	I have to make a correction, i had to go look at my receipts from a long time ago. I have run the 2000's not the 1500's They worked great on the street. __________________ 2025 M240i Xdrive TNM/Cog - On Order
	Appreciate 0 Quote

11-15-2024, 11:36 AM	#55
ourlee Major 1532 Rep 1,497 Posts Drives: WTB your comfort seats Join Date: Nov 2015 Location: Vista View Apartments iTrader: (0)	I’m hoping my dealer will install the 1500s and a Mishimoto as part of my deal. __________________ I want to buy your comfort seats.
	Appreciate 1 Ronin761441.50 Quote

11-15-2024, 01:39 PM	#57
Bret Private First Class 187 Rep 117 Posts Drives: 2017 Jaguar F-Type Join Date: Jul 2024 Location: Georgia, USA iTrader: (0)	I decided to wait until after the 1,200-mile break-in to install replacement pads because I wanted to make sure that everything was working correctly from the factory. I wanted to avoid the possibility of something being wrong with the brakes from the factory, but BMW blaming it on the replacement pads.
	Appreciate 1 Ronin761441.50 Quote

11-15-2024, 02:28 PM	#59
IanH Second Lieutenant 292 Rep 287 Posts Drives: '25 M240xi Join Date: Dec 2012 Location: United States iTrader: (1) Garage List '25 BMW M240i Xdrive [0.00]	Was just watching a video on youtube where this guy got completely shafted on warranty issue with his brakes because he replaced the pads before the rotor problem showed itself. A good idea to make sure the car is in good status before you do non-reversible mods. __________________ 2025 M240i Xdrive TNM/Cog - On Order
	Appreciate 0 Quote

11-16-2024, 11:08 PM	#62
Ehloo Major 676 Rep 1,155 Posts Drives: 15 x5 m Join Date: Oct 2015 Location: Norcal iTrader: (0)	i am starting to get some clunking noises from the brakes. hard to explain then they do but usually when at a full stop and start moving. it’s not always but it’s like thump. i have read this is someone normal for brakes but nobody mentioned this with the isweep. didn’t have the issue with my stock brakes. i did use caliper grease but maybe not enough or in the right place?
	Appreciate 0 Quote

11-18-2024, 10:09 AM	#64
BIGW0RM You got my money? 4043 Rep 5,042 Posts Drives: Ice Cream Truck Join Date: Jul 2011 Location: ///OC iTrader: (14) Garage List 2025 BMW G87 M2 [10.00] 2025 G87 M2 [9.87]	I had no clunking with isweeps while they where on my M3. Not a single sound from them. __________________ 2025 G82 M2 6MT /// 2025 X5 40i X
	Appreciate 0 Quote

Yesterday, 01:43 AM	#65
Ehloo Major 676 Rep 1,155 Posts Drives: 15 x5 m Join Date: Oct 2015 Location: Norcal iTrader: (0)	guess it’s hit or miss. my isweep dealer mentioned isweep came by from Japan and dropped off a bunch of new grease. a thicker formula which makes me assume others are having issues and they are aware of it. i will be trying some and hopefully it helps. have to basically re-install the pads to grease them
	Appreciate 0 Quote