[sammytothe]

Installed the CT Carbon duckbill spoiler today! I plan on getting the Alpha N wing eventually

[DD99990]

Had the zunsport mesh fitted this morning (free of charge… wanted a 2025 model to test fit!)

[MineralGreyMetallic]

Originally Posted by DD99990

Had the zunsport mesh fitted this morning (free of charge… wanted a 2025 model to test fit!)

You know what question I'm going to ask ...

[ScottyRyan2019]

Originally Posted by MineralGreyMetallic

You know what question I'm going to ask ...

Pick me! Pick me!

[Orange fever]

Just added some Boom Boom (little boom) !!!
JBL with amp combo. Got dark will clean it up tomorrow before I head out to Vegas or finish it on Monday ///

[nicoG87]

Originally Posted by sammytothe

PPF’ed and Installed the ADRO front lip and side skirts, it’s a whole new car haha! I ordered the Vorsteiner diffuser using IND’s sale so hopefully that comes in soon; also need spacers…

Nice job! how was the install like? did it require lots of self tappers/rivets or mainly oem points?

[Digitalprty]

Originally Posted by Orange fever

Just added some Boom Boom (little boom) !!!
JBL with amp combo. Got dark will clean it up tomorrow before I head out to Vegas or finish it on Monday ///

Any issues with rattles?

[///MoT]

Originally Posted by DD99990

Had the zunsport mesh fitted this morning (free of charge… wanted a 2025 model to test fit!)

That mesh looks great!

But.... my GOD how in the hell do you get into your car when it's in the garage? That is some tight quarters man!

[NewToM]

Originally Posted by ///MoT

That mesh looks great!

But.... my GOD how in the hell do you get into your car when it's in the garage? That is some tight quarters man!

The trunk obviously.

[///MoT]

Originally Posted by M2 CCO

Installed the Bimmer Tech/Alpha one UP10 amp!

I've got an Alpha 1 on its way to me right now. M2 CCO any tips/tricks you can provide to help me with my install?


Thanks!
Tom

[sammytothe]

Originally Posted by nicoG87

Nice job! how was the install like? did it require lots of self tappers/rivets or mainly oem points?

Thank you! Install was pretty easy and instructions straight forward. The lip lined up to the OEM points only. The side skirts had 4 or 5 bolts that lined up to OEM points and also came with double sided tape and 10 self tappers for each side.

[M2 CCO]

Originally Posted by ///MoT

I've got an Alpha 1 on its way to me right now. M2 CCO any tips/tricks you can provide to help me with my install?


Thanks!
Tom

Congrats! The install is pretty straight forward so should be a nice quick little project! One thing to note for me was that upon install I wasn’t getting any bass… zero… So I reached out to BMW DIY Guy and he gave me the tip to check the pins on the wiring harness that was provided. Sure enough one of them had backed out, so I reset it and it worked like a charm! Sounds great! You won’t be disappointed!

[BMW DIY Guy]

Originally Posted by M2 CCO

Congrats! The install is pretty straight forward so should be a nice quick little project! One thing to note for me was that upon install I wasn’t getting any bass… zero… So I reached out to BMW DIY Guy and he gave me the tip to check the pins on the wiring harness that was provided. Sure enough one of them had backed out, so I reset it and it worked like a charm! Sounds great! You won’t be disappointed!

Happy to help! If anyone else needs Bimmertech gear (or Valvetronic now too!!!!) let me know!

[motorknut]

Originally Posted by sammytothe

Thank you! Install was pretty easy and instructions straight forward. The lip lined up to the OEM points only. The side skirts had 4 or 5 bolts that lined up to OEM points and also came with double sided tape and 10 self tappers for each side.

the ADRO lip looks fierce. I’m surprised they didn’t put in additional tape or rivets for the front lip! Lip is still secure despite the supposed increased downforce ?

Originally Posted by sammytothe

Installed the CT Carbon duckbill spoiler today! I plan on getting the Alpha N wing eventually

Not a fan of the ADRO wing?

[usafmike]

Custom shifter from IND. I had the same one in my F87. Much better feel IMO.

[sammytothe]

Originally Posted by motorknut

Not a fan of the ADRO wing?

I like the Swan neck but I lovee the Alpha N flow through! I think it gives the G87 a cool E36 vibe and seeing it on some people’s builds is what made me fall in love with the G87.

The front splitter is definitely secure; I’ve done a few triple digit runs on the highway since it was installed and no issues so far 🚀.

[LeggoRacing]

Took it back out to COTA for a wet track weekend... Wound up with only 2 dry session, but still got some fun video chasing things. Still adjusting to driving a car without aero

It's a long one

[motorknut]

Originally Posted by sammytothe

The front splitter is definitely secure; I’ve done a few triple digit runs on the highway since it was installed and no issues so far 🚀.

impressive its such a simple install. do the vertical strakes help to secure the lip by hooking onto the bumper gloss trim piece?

Love your choice of ADRO splitter and rear CT carbon spoiler. but also wondering also if the splitter winglets make it a pain to wash in between to the bumper

post more pics when you get the chance!

[sammytothe]

Originally Posted by motorknut

impressive its such a simple install. do the vertical strakes help to secure the lip by hooking onto the bumper gloss trim piece?

Love your choice of ADRO splitter and rear CT carbon spoiler. but also wondering also if the splitter winglets make it a pain to wash in between to the bumper

post more pics when you get the chance!

Yeah I definitely think the vertical pieces help to keep it secure, they hook around the trim piece pretty snug.

The winglets are 100% a pain LOL. It’s a tight space on both the side skirts and the splitter. The whole car is PPF/ceramic coated and the big red sponge I use for rinseless washing does not fit in those gaps so I need to use a small microfiber rag to wash those areas.

Side note: I had the Vorsteiner diffuser and SST valve controller installed today. Planning on doing the mid pipe in a couple months and then some VT Forged wheels.

[71dsp]

Installed a new brace to give me a bit more exhaust clearance with the ER mid pipe and also installed the Alpha N front lip/splitter. I hesitate to call it a splitter, because it certainly doesn't feel rigid enough to be as effective as a real splitter like the Verus. It certainly looks good though (pardon the dirty car).

I'm lowered on MP springs with it set as low as it will go. Clearance at the lip is just a tad over 4". So there's not a lot of clearance for dips, etc. Going to have to be very careful.

[M3_Dylan_]

I sold my RS3, put my E46 M3 under cover in storage, and bought a Toronto Red 6-speed with the carbon pack. I haven't daily driven a RWD car in the snow since I was in highschool with an E36 but here we are... wish me luck

[mrdudley]

Finally getting the ball rolling on the DINAN exhaust that has been sitting around here for over a month.

Step 1: black out the muffler