[MASHCT]

Installed the PedalHaus M2 pedal kit with the engraving on the foot rest. The foot rest is the only piece that does not fit exactly as its shape is for the F87 M2 - but it still works. Gotta look real close to see it's not a perfect fit.

The other 3 pedals fit perfectly & are very easy to install. The kit comes with a dummy pedal (metal) template you use as a guide to locate where you want/can drill for the screws to hold the brake & clutch pedals.

You need to remove the OEM pedal covers on the brake and clutch pedals. Use a heat gun to warm em up a little & soften the rubber. The pedal cover stretches around and fits very tightly onto the pedals.

Note that the clutch pedal is a composite plastic and the brake pedal is metal. Drill a small pilot hole using the template as a guide then drill the larger hole for the screw. You only need 2 screws to hold the metal plate into the pedal.

I put the screws in the upper right corner and lower left corner on both pedals.

[tom @ eas]

New pedals look great!

[nerdthewise]

How do they feel? Happy with the money and time spent? I’ve had those on a maybe/someday list, but worry they will get slippery when wet (I’m in Seattle).

[MASHCT]

Originally Posted by nerdthewise

How do they feel? Happy with the money and time spent? I’ve had those on a maybe/someday list, but worry they will get slippery when wet (I’m in Seattle).

Howdy! I really like the way they feel. They really hold the foot in place in the clutch, brake & accelerator. The raised dots keep your foot from slipping off the pedal. Not that the OEM pedals are slippery, but these are definitely more secure feeling.

Check out the pic for what the raised areas look like.

[nerdthewise]

Originally Posted by MASHCT

Howdy! I really like the way they feel. They really hold the foot in place in the clutch, brake & accelerator. The raised dots keep your foot from slipping off the pedal. Not that the OEM pedals are slippery, but these are definitely more secure feeling.

Check out the pic for what the raised areas look like.

Those look great actually. How was the install? Let’s say for the sake of argument that I am an install baby and get nervous when I have to drill a new car…

[MASHCT]

Originally Posted by nerdthewise

Those look great actually. How was the install? Let’s say for the sake of argument that I am an install baby and get nervous when I have to drill a new car…

Even though you're drilling the OEM pedal it's just the mounting pedal. you are removing the pedal cover to get at the mounting plate that is the actual pedal.

Start with one of your very small diameter bits to drill a pilot hole. Then you will use a larger bit to drill the actual hole thru which the bolt will go. You need that pilot hole to guide the larger bit & ensure it stays on the pedal. The large but will jump/slide on the plate without that pilot hole.

Those holes are the most difficult aspect of installation but I would rate that difficulty a 2. Make sure you have bits that can drill thru metal and don't use a lot of pressure when drilling. Def let the bit do the work.

PH supplies a metal template that has protrusions on the back that seat the template in the exact place it needs to be against the OEM pedal mounting plate so you can drill the holes in the right spots. Put that in place, hold it there and drill your pilot holes. Easy peasy!!

The foot rest and accelerator use self-tappong screws and 3M double sided tape. I added more tape for more security.

Hit me up if you need help/advice when you're ready to install.

[daddyjaxx]

Originally Posted by MASHCT

The foot rest and accelerator use self-tappong screws and 3M double sided tape. I added more tape for more security.

Hit me up if you need help/advice when you're ready to install.

I've had the clutch and brake installed for 3 months now and really like the feel of them. But I still haven't installed the footrest or the accelerator because I struggled to remove the stock ones. Could you give me some advice on how to install the footrest and accelerator?

Thanks!

[Scrutineer]

Originally Posted by MASHCT

Howdy! I really like the way they feel. They really hold the foot in place in the clutch, brake & accelerator. The raised dots keep your foot from slipping off the pedal. Not that the OEM pedals are slippery, but these are definitely more secure feeling.

Check out the pic for what the raised areas look like.

Very nice! Cool upgrade.

Also, are those Cocomats? Also sharp. Time for me to order a set with spring coming.

[MASHCT]

Originally Posted by Scrutineer

Very nice! Cool upgrade.

Also, are those Cocomats? Also sharp. Time for me to order a set with spring coming.

Yepper! Cocomats! Man, they're so nice!! They've stood up to winter's grit & grime real nicely, too. ZERO complaints. Wish they did an ///M color pattern, though.

[MASHCT]

Originally Posted by daddyjaxx

I've had the clutch and brake installed for 3 months now and really like the feel of them. But I still haven't installed the footrest or the accelerator because I struggled to remove the stock ones. Could you give me some advice on how to install the footrest and accelerator?

Thanks!

Howdy bub!

You don't remove either the foot rest or the accelerator. Put double-sided tape on the backs of both (just holds it in place - not used to permanently mount). Then, I used 4 screws on each pedal to actually fix them to both pedals. Drill a small pilot hole - use a 1/16" bit. They're just thicker plastic pedals, nothing behind them to get damaged.

I think mine came with the screws, if I remember correctly. If they didn't then I just used standard 3/4" wood screws (flat head).

[daddyjaxx]

Huh... Yeah mine didn't come with any. I'll grab some from my local supply store and install them over the weekend. Thanks for the help

[Scrutineer]

Originally Posted by MASHCT

Yepper! Cocomats! Man, they're so nice!! They've stood up to winter's grit & grime real nicely, too. ZERO complaints. Wish they did an ///M color pattern, though.

Wow, not having an M pattern seems like a missed opportunity for them.

And thanks - I was thinking of them as summer only, but maybe year round. My TuxMats are fine. Better than fine, really, but Cocomats would be nice. I’ve ordered some swatches. What part of the country are you in?

[MASHCT]

Originally Posted by Scrutineer

Wow, not having an M pattern seems like a missed opportunity for them.

And thanks - I was thinking of them as summer only, but maybe year round. My TuxMats are fine. Better than fine, really, but Cocomats would be nice. I’ve ordered some swatches. What part of the country are you in?

I really wish they had that pattern too. The calico pattern they have is pretty cool with the orange and black. Imagine that one in M colors!

I am in Hartford CT area. The land of the ice and snow, and salt and the potholes where your wheels shouldn't go... LOL

[MASHCT]

Originally Posted by daddyjaxx

Huh... Yeah mine didn't come with any. I'll grab some from my local supply store and install them over the weekend. Thanks for the help

That's weird you didn't get nuts/bolts. For the clutch & brake, for the nuts you want those self-tightening type nuts. That's what those 2 pedals came with. They hold the bolts fast and will not loosen.