[Jonesing4a2]

Originally Posted by John @ BSPK

Something interesting and, by customer request, Vera in a machined face satin setup. Kind of an homage to BMW’s Bi-Color but a very different take. We did a pewter base color, machined face, and satin clear overall to give a two-tone dynamic that is subtle but distinctive. Can’t wait to see this one mounted!

Thanks, John, for your ongoing support and patience through the process. I can't wait to get these mounted on my PBM M2! Will definitely post pics.

[Dave07997S]

Originally Posted by John @ BSPK

Something interesting and, by customer request, Vera in a machined face satin setup. Kind of an homage to BMW’s Bi-Color but a very different take. We did a pewter base color, machined face, and satin clear overall to give a two-tone dynamic that is subtle but distinctive. Can’t wait to see this one mounted!

Vera | Pewter w/Machined Face Satin | 19x10, 20x10.5 | Flush Fitment | Drilled for OEM Caps | M Sticker Location

View post on imgur.com

Holy crap thats nice!!!

[LAGWAGN]

Originally Posted by Jonesing4a2

Thanks, John, for your ongoing support and patience through the process. I can't wait to get these mounted on my PBM M2! Will definitely post pics.

Well dang! Saw these and was sure I was going to order the same. They’re amazing, but we can’t have two sets rolling around DFW. 😉

[wife-dog-bmw]

Thanks, John, for your ongoing support and patience through the process. I can't wait to get these mounted on my PBM M2! Will definitely post pics.


You are making my decision tougher. I can’t wait to see these on PBM.

[digitldlnkwnt]

John @ BSPK
Leora reminds me of the Magen MF10.

[BIGW0RM]

Originally Posted by MASHCT

This is making me rethink gloss titanium for a set of Gretas I am thinking about & switching to satin. How do you think the machined face will work with the titanium? Too close a match in color/tone to pop?

This is a great color combo.

Id stick with the gloss. Mine are gloss and they clean so easily. Maybe satin cleans as easy too. I don't know. But the gloss cleans very easily.

[Flux5]

Originally Posted by BIGW0RM

Id stick with the gloss. Mine are gloss and they clean so easily. Maybe satin cleans as easy too. I don't know. But the gloss cleans very easily.

I believe satin is still ultimately smooth to the touch because a layer of clear is added at the end to level out everything.

[BIGW0RM]

Maybe so. I dont really know. All I do know is, my gloss wheels wipe clean so easily. BMW mesh wheels do not wipe clean like these do at all.

[SLE3PER]

Originally Posted by Jonesing4a2

Thanks, John, for your ongoing support and patience through the process. I can't wait to get these mounted on my PBM M2! Will definitely post pics.

I gotta see these in person when you get them mounted. I’m in the DFW area as well.

[BIGW0RM]

Originally Posted by SLE3PER

I gotta see these in person when you get them mounted. I’m in the DFW area as well.

In person is a huge difference vs pics.

[MASHCT]

Originally Posted by BIGW0RM

Maybe so. I dont really know. All I do know is, my gloss wheels wipe clean so easily. BMW mesh wheels do not wipe clean like these do at all.

That looks damn nice, man!

[Dave07997S]

Originally Posted by Jonesing4a2

Thanks, John, for your ongoing support and patience through the process. I can't wait to get these mounted on my PBM M2! Will definitely post pics.

You know imitation is the most sincerest form of flattery. I am doing the same. Love what you did there.

[John @ BSPK]

Mixing it up and trying to get more of the colors that haven’t been shown in here. This is extra dark gunmetal gloss (and it is dark, note the outdoor pics). It’s a really nice rich gunmetal tone that has historically been relatively popular in other markets but this is the first BMW set I’ve made in the finish.

Millie |Extra Dark Gunmetal Gloss | 19x9, 19x10.5 | Non-G8x Fitment | BSPK Caps | Knurling |

Under inspection lighting:

View post on imgur.com

Outdoors:

View post on imgur.com

[Jonesing4a2]

Originally Posted by LAGWAGN

Well dang! Saw these and was sure I was going to order the same. They’re amazing, but we can’t have two sets rolling around DFW. ��

Originally Posted by SLE3PER

I gotta see these in person when you get them mounted. I’m in the DFW area as well.

Originally Posted by Dave07997S

You know imitation is the most sincerest form of flattery. I am doing the same. Love what you did there.

Originally Posted by wife-dog-bmw

You are making my decision tougher. I can’t wait to see these on PBM.

Glad to share some inspiration - really a reuse/combining of some previous BMW wheel paint themes - with others considering the BSPK Forged Vera, keeping with an OEM+ theme. It was a winding road to this point, John has been great to work with.

Just get your orders in soon before the new branding/licensing terms are worked out!
(j/k)

[John @ BSPK]

Originally Posted by Jonesing4a2

Glad to share some inspiration - really a reuse/combining of some previous BMW wheel paint themes - to others considering the BSPK Forged Vera, keeping with an OEM+ theme. It was a winding road to this point, John has been great to work with.

Just get your orders in soon before the new branding/licensing terms are worked out!
(j/k)

Love it! Definitely. It was an awesome project and it was great working together on it. It was a winding road indeed - kind of off and on but we kept a dialogue going. I love how it came out.

Thank you again and can't wait to see them on!

[John @ BSPK]

An absolute stunner today, IMHO. This design evolved from a few of the brushed-face, polished-window setups I’ve done — but instead of raw aluminum, this one’s finished in brushed and polished champagne. The bi-substrate effect gives it a really dynamic look, with the high-sheen polished satin windows perfectly complementing the brushed satin face.

Flavia |Champagne Clear (Satin) over Brushed Face and Polished Windows | 20x10.5, 20x12 | Flush Fitment (for M8)| OEM Caps | Knurling |

View post on imgur.com

Interestingly, I have a set of Anikas in this same finish combination that I’ll post later this week (still have a huge backlog of posts to make admittedly).

[MattBlack_577]

Wow John that looks stunning!! Makes me want to reconsider the colour we chose for my order 🫣🤤

[John @ BSPK]

Fun one today…

A forum member reached out wanting to build his dream wheel setup. We went back and forth on the design for weeks — literally down to the millimeter of spacing between the twin spokes — to keep them perfectly parallel while still leaving enough room for easy cleaning.

I’ve been doing a lot of custom projects lately, and honestly, I love it. If you’ve got something specific in mind but don’t see it on my site, just reach out. Chances are we can make it happen.

Another fun little tidbit: if you do a fully custom design and I end up adding it to the site (I usually do, unless it’s too close to an existing one), you get to name it — as long as it fits the BSPK naming convention. This one’s called Ariana, named by the customer himself. Beautiful name for a beautiful set of wheels.

Lastly, a quick anecdote about the videos: I posted two this time because I wasn’t happy with the reflections in the first one. For clarity — what I share here are my marketing videos, not the inspection ones. Every set gets several detailed inspection videos before leaving the factory, panned slowly over each spoke and surface from multiple angles. While the factory performs its own QC, my standard goes beyond that. Their QC is to clear the wheels for me — mine is to clear them for you. I don’t ship anything until I’m personally convinced it meets the BSPK standard.

Without further ado...

Ariana | Gloss Black | 20x10, 20x10.5 | Flush Fitment | OEM Caps | BSPK Forged Text on Lip |

View post on imgur.com

View post on imgur.com

[Otto Bon Jovi]

Originally Posted by John @ BSPK

Fun one today…

A forum member reached out wanting to build his dream wheel setup. We went back and forth on the design for weeks — literally down to the millimeter of spacing between the twin spokes — to keep them perfectly parallel while still leaving enough room for easy cleaning.

I’ve been doing a lot of custom projects lately, and honestly, I love it. If you’ve got something specific in mind but don’t see it on my site, just reach out. Chances are we can make it happen.

Another fun little tidbit: if you do a fully custom design and I end up adding it to the site (I usually do, unless it’s too close to an existing one), you get to name it — as long as it fits the BSPK naming convention. This one’s called Ariana, named by the customer himself. Beautiful name for a beautiful set of wheels.

Lastly, a quick anecdote about the videos: I posted two this time because I wasn’t happy with the reflections in the first one. For clarity — what I share here are my marketing videos, not the inspection ones. Every set gets several detailed inspection videos before leaving the factory, panned slowly over each spoke and surface from multiple angles. While the factory performs its own QC, my standard goes beyond that. Their QC is to clear the wheels for me — mine is to clear them for you. I don’t ship anything until I’m personally convinced it meets the BSPK standard.

Without further adieu...

[CENTER][B]Ariana | Gloss Black | 20x10, 20x10.5 | Flush Fitment | OEM Caps | BSPK Forged Text on Lip | [...]

Those look really nice 👍

[Viffermike]

Originally Posted by John @ BSPK

Fun one today…

A forum member reached out wanting to build his dream wheel setup. We went back and forth on the design for weeks — literally down to the millimeter of spacing between the twin spokes — to keep them perfectly parallel while still leaving enough room for easy cleaning.

I’ve been doing a lot of custom projects lately, and honestly, I love it. If you’ve got something specific in mind but don’t see it on my site, just reach out. Chances are we can make it happen.

Another fun little tidbit: if you do a fully custom design and I end up adding it to the site (I usually do, unless it’s too close to an existing one), you get to name it — as long as it fits the BSPK naming convention. This one’s called Ariana, named by the customer himself. Beautiful name for a beautiful set of wheels.

Lastly, a quick anecdote about the videos: I posted two this time because I wasn’t happy with the reflections in the first one. For clarity — what I share here are my marketing videos, not the inspection ones. Every set gets several detailed inspection videos before leaving the factory, panned slowly over each spoke and surface from multiple angles. While the factory performs its own QC, my standard goes beyond that. Their QC is to clear the wheels for me — mine is to clear them for you. I don’t ship anything until I’m personally convinced it meets the BSPK standard.

Without further adieu...

Damn: Those are like my Maes, but with split spokes. Approved!

[John @ BSPK]

Since I teased it, I had to follow through — this one deserves its spotlight.
Introducing the bi-substrate Anika in champagne satin (brushed face / polished windows).

This set came out amazing IMHO — the contrast gives real depth to the face, with the high-sheen windows catching light from every angle. One I’m particularly excited to see mounted.

Anika |Champagne Clear (Satin) over Brushed Face and Polished Windows | 19x10, 20x11 | Flush Fitment | OEM Caps

View post on imgur.com

[MattBlack_577]

OMG 😍