My E9 2800cs restoration journal

chassis · 04-06-2021, 01:16 PM

Coming along nicely!

MPOWER5266 · 04-13-2021, 09:41 AM

My dad made some progress while I was out of town this weekend. We got the front bumper on the car.

Untitled by Nick Wood, on Flickr

After that he installed one of the over riders. But it had an issue.

Untitled by Nick Wood, on Flickr

When he tightened the over rider down, it pulled the bolt head through the metal (the one on the right.) So he added a washer and tried that, the bolt an washer pulled through this time. (on left.) We were told these were OEM BMW when we bought them but they were likely knock offs. We got our money back and ordered some from a trusted source, they should be in today.

Untitled by Nick Wood, on Flickr

They looked much nicer than they actually were.

Untitled by Nick Wood, on Flickr

Since we are waiting on those, he went ahead and installed the rear bumper and license plate lights.

Untitled by Nick Wood, on Flickr

Any finally put a coat of paint on the exhaust tip. We have a chrome cover for it on the way and I need to play with the hangers to get it leveled out a little.

Untitled by Nick Wood, on Flickr

Not a ton left to do before we can start shaking it down. Just some little trim bits and some random seals. We should have a license plate for it this week. More to come.

MPOWER5266 · 04-16-2021, 10:23 AM

Front bumper, round two.

Untitled by Nick Wood, on Flickr

This time the over riders were in much better shape and the bumper went on fine.

I stopped by on the way home to drop off the plate frame and my dad just so happened to have the tag so we went ahead and installed it.

Untitled by Nick Wood, on Flickr

It still needs some little trim bits and part of the dash, but since it was tagged.... Here are a couple of videos.

Untitled by Nick Wood, on Flickr

My dad and I took it on quick little spins around the neighborhood until it go up to temp. It seemed to run really well and I hope to get some real time behind the wheel tomorrow.

Untitled by Nick Wood, on Flickr

I love the presence this car has when it rolls up, its such a good looking shape. The "build" portion of this thread might be coming to an end but I know we will have some little projects left to do, so stay tuned.

wdb · 04-17-2021, 06:16 AM

It is even more beautiful in motion. Wow!

MPOWER5266 · 04-20-2021, 09:24 AM

Big steps on the E9 lately.

We finished buttoning up the interior.

Untitled by Nick Wood, on Flickr

Found that it has a "gun holder." Well not really but I like the idea.

Untitled by Nick Wood, on Flickr

Installed the final little bits of window trim.

Untitled by Nick Wood, on Flickr

Untitled by Nick Wood, on Flickr

I also took it for its first real drive. I even wore my period correct Seiko to commemorate the experience. It even has the same build month and year as when the car was imported to the states.

Untitled by Nick Wood, on Flickr

I just took it to the hangar and back. It ran great but there are some issues we are addressing this week. Most importantly the throttle was hanging wide open if you floor it. We have since fixed that, the linkage was hanging up on a hose clamp. It was also poorly aligned and actually broke while my dad was driving it so we re-routed it and it should be fixed. Also I think one of the rear brakes is hanging up but I may have fixed that during the drive. I had someone pull out in front of me while I was doing about 60mph. They had zero clue I was there until I locked up the brakes and swerved into a turn lane. So once I calmed back down and holstered my middle finger, I continued the drive and brakes felt better. I think it also needs a little work on the toe in, it seems to track and wander a bit on the road. We also have ordered a smaller Nardi steering wheel since the oem wheel hits our legs. There are a few other little things to work on but damn, it is a nice car.

Untitled by Nick Wood, on Flickr

Dlpfcb · 04-20-2021, 09:44 AM

Probably one of the best build threads on here. Thanks again for sharing, it’s a beauty.

flybigjet · 04-20-2021, 10:31 AM

Quote:

Originally Posted by MPOWER5266

There are a few other little things to work on but damn, it is a nice car.

The jet's not half-bad either!

Outstanding job. Truly.

MPOWER5266 · 04-20-2021, 01:31 PM

Thank you, and sadly the jet isnt mine. Haha.

lemetier · 04-20-2021, 02:54 PM

Quote:

Originally Posted by MPOWER5266

I would much rather have a Nardi but I think this will work.

I might have one hiding in a box somewhere.

Matt@EuroJerks · 04-20-2021, 03:12 PM

I since sold my car in November and have not been back since. This was the only reason I came back on!! It's so fulfilling to see it back on the road buttoned up. Congrats!!

Jbrown7403 · 04-20-2021, 07:11 PM

Congrats and beautiful pics! I can almost smell the leather! Hopefully we’ll get a spirited POV drive video one of these days

There is just something soooo damn cool about the E9 from the side with the 2 doors and forward sloping grill! I also love how open and airy it looks when all the windows are rolled down. Master stoke in automotive design!

0-60Motorsports · 04-22-2021, 11:43 AM

Looks good and nice watch

fmc000 · 04-25-2021, 12:58 PM

Yeah, that's an amazing 6139 you have on your wrist, congrats! Oh, and the car isn't half bad either!

MPOWER5266 · 04-26-2021, 10:30 AM

Small update over the weekend. Friday I drove the car to the gas station and put $25 in it. It almost got backed into by a drunk idiot while we were there but that another story. We drove it around a little and there was no gas smell, so we will fill it next time. It looked great sitting in the driveway when we got back.

Untitled by Nick Wood, on Flickr

Sunday my dad wanted to drive it a bit so I followed him over to the airport in my M3 so I could swap it for the 02. It made for a pretty good pic.

Untitled by Nick Wood, on Flickr

He and I cruised around for a little bit together. I had trouble keeping up with him in the 02.

Untitled by Nick Wood, on Flickr

The e9's temp never got past 1/4 and the heat wasnt working. We decided to dump the coolant and check the tstat. We also did an oil change while we were at it. My dad put mobil 1 in it not too long ago but we decided to switch it over to something better formulated for vintage cars and that had VDDP in it, so its going to run Valvoline VR-1.

Untitled by Nick Wood, on Flickr

I went home while the car cooled enough to drain the coolant, but my dad sent a photo of the tstat later in the evening.

Untitled by Nick Wood, on Flickr

That explains the gauge issue. We went ahead and ordered a new tstat, gaskets, coolant, and a temp sender. I am hoping that will fix it and Ill be able to take it to cars and coffee next weekend.

MPOWER5266 · 05-06-2021, 11:19 AM

So small e9 update. Last Friday I drove it to my house for the first time and gave it a bit of a clean up.

Untitled by Nick Wood, on Flickr

Saturday my dad and I drove it most of the morning to a couple of car shows. It was mainly a drive to see if anything else needed fixing. It ran great but the passenger rear brake felt like it was hanging up, so we put it on the lift to adjust that. While it was up we gave the engine a good steam clean to try to locate some leaks.

Untitled by Nick Wood, on Flickr

We also addressed the seat belt issue. As you can see, the drivers seat belts are just limp strips of nylon that extend from the back seat area. They adjust at the buckle but they are a huge pain.

Untitled by Nick Wood, on Flickr

So my dad located some inertia reel set ups, and built some brackets. Its a pretty slick and reversible option.

Untitled by Nick Wood, on Flickr

Untitled by Nick Wood, on Flickr

They are mounted to the oem mount so they should be as safe as the oem belts. Which I assume were added as an after thought and were not really safe to begin with.

Untitled by Nick Wood, on Flickr

They are much more comfortable and certainly more convenient. Now we just need to come up with some sort of mount or guide that we can attach to the headrest to keep the belts in place. Something removable of course.

Untitled by Nick Wood, on Flickr

MPOWER5266 · 05-10-2021, 09:09 AM

I didn't do much this weekend, we had a friends bday and mothers day. I wasnt allowed to do too much car/shop related stuff. We did get the seat belt holders in.

Untitled by Nick Wood, on Flickr

These are just simple leather straps that are held on to the headrest with velcro. The seat belt is always were I want it, but it could break free in the case of an accident. I thought it was a pretty good solution.

Untitled by Nick Wood, on Flickr

We also adjusted the rear brakes so I took it on a little drive to test it out Sunday afternoon. I got some pretty awful news about a friend Sunday morning, it was nice to clear my head a little. Its also really hard to find a good shady spot for photos around town since the tornado, this was the best I could do.

Untitled by Nick Wood, on Flickr

It will hopefully make its cars and coffee debut, this coming Saturday.

CJ421 · 05-12-2021, 07:02 AM

What an awesome build. The E9's lines are classic. Love the color combo.

Charles

mapleleaf1773 · 05-12-2021, 07:20 AM

Simply a beautiful piece of machinery and a amazing job you have done.

Its gorgeous. I'm not a huge James Bond guy but I feel like Bond would pop out approaching the jet (a few photos back).

You sir have a piece of history

TAZ007 · 05-16-2021, 01:24 PM

Excellent car, rebuild, and thread. Thank you for sharing. I enjoyed the story.

NorthernDancer · 05-16-2021, 03:20 PM

Great story and great pics. Very appreciate your efforts here. Have you ever read Rob Siegel's E9 restoration story?

MPOWER5266 · 05-17-2021, 09:06 AM

Saturday I took the E9 to its first cars and coffee. It ran great and was a huge hit. I parked, and by the time I got out of the car, I was in 3 conversations. I didnt get a chance to take any pictures or really even walk around. I ducked out a little early and grabbed some BBQ with my buddy.

Untitled by Nick Wood, on Flickr

I wanted to drive around for a bit more after lunch but people have been drinking gas around here so the e9 was running a little low. On the way back to the shop I noticed people pumping gas at a station so I stopped... They had gas!!!

Untitled by Nick Wood, on Flickr

Since the tank was full, I cruised around for a bit and put some real miles on the car for the first time. The Italian tune ups seem to be helping a lot, its running, starting and smelling better. My inlaws had their anniversary this weekend, and we had the twins baptized by my wifes preacher grandma, so my brother in-law was in town. I stopped by and showed them the car and snapped a quick pick while I was there.

Untitled by Nick Wood, on Flickr

The nardi wheel and coco mats should be in soon but its running like a top now. It such a good car.

happyjack · 05-17-2021, 10:19 AM

amazing resto! thanks for bringing us along for the ride!

04-06-2021, 01:16 PM	#221
chassis Colonel 8067 Rep 2,498 Posts Drives: 9Y0 Cayenne S Join Date: Mar 2019 Location: Einbahnstraße iTrader: (0) Garage List 2020 Porsche Cayenne S [7.69]	Coming along nicely!
	Appreciate 0 Quote

04-13-2021, 09:41 AM	#222
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	My dad made some progress while I was out of town this weekend. We got the front bumper on the car. Untitled by Nick Wood, on Flickr After that he installed one of the over riders. But it had an issue. Untitled by Nick Wood, on Flickr When he tightened the over rider down, it pulled the bolt head through the metal (the one on the right.) So he added a washer and tried that, the bolt an washer pulled through this time. (on left.) We were told these were OEM BMW when we bought them but they were likely knock offs. We got our money back and ordered some from a trusted source, they should be in today. Untitled by Nick Wood, on Flickr They looked much nicer than they actually were. Untitled by Nick Wood, on Flickr Since we are waiting on those, he went ahead and installed the rear bumper and license plate lights. Untitled by Nick Wood, on Flickr Any finally put a coat of paint on the exhaust tip. We have a chrome cover for it on the way and I need to play with the hangers to get it leveled out a little. Untitled by Nick Wood, on Flickr Not a ton left to do before we can start shaking it down. Just some little trim bits and some random seals. We should have a license plate for it this week. More to come. Last edited by MPOWER5266; 04-13-2021 at 09:47 AM..
	Appreciate 6 2000cs3905.00 spazzyfry1235015.00 chassis8066.50 wdb5074.50 larryn2155.50 overcoil3121.00 Quote

04-16-2021, 10:23 AM	#223
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Front bumper, round two. Untitled by Nick Wood, on Flickr This time the over riders were in much better shape and the bumper went on fine. I stopped by on the way home to drop off the plate frame and my dad just so happened to have the tag so we went ahead and installed it. Untitled by Nick Wood, on Flickr It still needs some little trim bits and part of the dash, but since it was tagged.... Here are a couple of videos. Untitled by Nick Wood, on Flickr My dad and I took it on quick little spins around the neighborhood until it go up to temp. It seemed to run really well and I hope to get some real time behind the wheel tomorrow. Untitled by Nick Wood, on Flickr I love the presence this car has when it rolls up, its such a good looking shape. The "build" portion of this thread might be coming to an end but I know we will have some little projects left to do, so stay tuned.
	Appreciate 12 2000cs3905.00 MmmmmM22666.00 chassis8066.50 tracer bullet3745.50 wdb5074.50 happyjack1758.50 P111734.00 larryn2155.50 IllSic_Design2125.00 Fakemike372.00 overcoil3121.00 PhaceN52177.50 Quote

04-17-2021, 06:16 AM	#224
wdb dances with roads 5075 Rep 4,130 Posts Drives: '07 E86, '02 996, '95 Seven Join Date: Jul 2015 Location: the perimeter iTrader: (4)	It is even more beautiful in motion. Wow!
	Appreciate 1 overcoil3121.00 Quote

04-20-2021, 09:24 AM	#225
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Big steps on the E9 lately. We finished buttoning up the interior. Untitled by Nick Wood, on Flickr Found that it has a "gun holder." Well not really but I like the idea. Untitled by Nick Wood, on Flickr Installed the final little bits of window trim. Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr I also took it for its first real drive. I even wore my period correct Seiko to commemorate the experience. It even has the same build month and year as when the car was imported to the states. Untitled by Nick Wood, on Flickr I just took it to the hangar and back. It ran great but there are some issues we are addressing this week. Most importantly the throttle was hanging wide open if you floor it. We have since fixed that, the linkage was hanging up on a hose clamp. It was also poorly aligned and actually broke while my dad was driving it so we re-routed it and it should be fixed. Also I think one of the rear brakes is hanging up but I may have fixed that during the drive. I had someone pull out in front of me while I was doing about 60mph. They had zero clue I was there until I locked up the brakes and swerved into a turn lane. So once I calmed back down and holstered my middle finger, I continued the drive and brakes felt better. I think it also needs a little work on the toe in, it seems to track and wander a bit on the road. We also have ordered a smaller Nardi steering wheel since the oem wheel hits our legs. There are a few other little things to work on but damn, it is a nice car. Untitled by Nick Wood, on Flickr
	Appreciate 14 2000cs3905.00 tracer bullet3745.50 flybigjet7717.00 fiveohwblow3633.00 MmmmmM22666.00 chassis8066.50 wdb5074.50 happyjack1758.50 Jbrown74032903.50 larryn2155.50 Amused31.00 overcoil3121.00 PhaceN52177.50 InnerBlueSkies1097.00 Quote

04-20-2021, 09:44 AM	#226
Dlpfcb Captain 487 Rep 646 Posts Drives: AW E92 M3 Join Date: Aug 2017 Location: Idaho iTrader: (1)	Probably one of the best build threads on here. Thanks again for sharing, it’s a beauty.
	Appreciate 1 overcoil3121.00 Quote

04-20-2021, 01:31 PM	#228
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Thank you, and sadly the jet isnt mine. Haha.
	Appreciate 0 Quote

04-20-2021, 03:12 PM	#230
Matt@EuroJerks Lieutenant 498 Rep 476 Posts Drives: 2021 Jeep Cherokee Join Date: Sep 2016 Location: CT iTrader: (1)	I since sold my car in November and have not been back since. This was the only reason I came back on!! It's so fulfilling to see it back on the road buttoned up. Congrats!!
	Appreciate 0 Quote

04-20-2021, 07:11 PM	#231
Jbrown7403 Captain 2904 Rep 689 Posts Drives: 2016 BMW M4 Join Date: Aug 2019 Location: Austin Texas iTrader: (0)	Congrats and beautiful pics! I can almost smell the leather! Hopefully we’ll get a spirited POV drive video one of these days There is just something soooo damn cool about the E9 from the side with the 2 doors and forward sloping grill! I also love how open and airy it looks when all the windows are rolled down. Master stoke in automotive design!
	Appreciate 0 Quote

04-22-2021, 11:43 AM	#232
0-60Motorsports Brigadier General 876 Rep 3,215 Posts Drives: BMW M3 JB 04 Coupe Join Date: Aug 2007 Location: Kingdom of Bahrain iTrader: (1)	Looks good and nice watch __________________ Current Mods: 2004 E46 M3cs JB/CSL 2010 E70 X5M AW/BLACK 2011 VW Golf R DSG White/Black IG: @060Motorsports
	Appreciate 0 Quote

04-25-2021, 12:58 PM	#233
fmc000 Private 39 Rep 96 Posts Drives: 320d E91 Join Date: Sep 2016 Location: Como, Italy iTrader: (0)	Yeah, that's an amazing 6139 you have on your wrist, congrats! Oh, and the car isn't half bad either!
	Appreciate 1 MPOWER52664778.00 Quote

04-26-2021, 10:30 AM	#234
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Small update over the weekend. Friday I drove the car to the gas station and put $25 in it. It almost got backed into by a drunk idiot while we were there but that another story. We drove it around a little and there was no gas smell, so we will fill it next time. It looked great sitting in the driveway when we got back. Untitled by Nick Wood, on Flickr Sunday my dad wanted to drive it a bit so I followed him over to the airport in my M3 so I could swap it for the 02. It made for a pretty good pic. Untitled by Nick Wood, on Flickr He and I cruised around for a little bit together. I had trouble keeping up with him in the 02. Untitled by Nick Wood, on Flickr The e9's temp never got past 1/4 and the heat wasnt working. We decided to dump the coolant and check the tstat. We also did an oil change while we were at it. My dad put mobil 1 in it not too long ago but we decided to switch it over to something better formulated for vintage cars and that had VDDP in it, so its going to run Valvoline VR-1. Untitled by Nick Wood, on Flickr I went home while the car cooled enough to drain the coolant, but my dad sent a photo of the tstat later in the evening. Untitled by Nick Wood, on Flickr That explains the gauge issue. We went ahead and ordered a new tstat, gaskets, coolant, and a temp sender. I am hoping that will fix it and Ill be able to take it to cars and coffee next weekend.
	Appreciate 6 P111734.00 stein_325i25297.00 MmmmmM22666.00 tracer bullet3745.50 chassis8066.50 wdb5074.50 Quote

05-06-2021, 11:19 AM	#235
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	So small e9 update. Last Friday I drove it to my house for the first time and gave it a bit of a clean up. Untitled by Nick Wood, on Flickr Saturday my dad and I drove it most of the morning to a couple of car shows. It was mainly a drive to see if anything else needed fixing. It ran great but the passenger rear brake felt like it was hanging up, so we put it on the lift to adjust that. While it was up we gave the engine a good steam clean to try to locate some leaks. Untitled by Nick Wood, on Flickr We also addressed the seat belt issue. As you can see, the drivers seat belts are just limp strips of nylon that extend from the back seat area. They adjust at the buckle but they are a huge pain. Untitled by Nick Wood, on Flickr So my dad located some inertia reel set ups, and built some brackets. Its a pretty slick and reversible option. Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr They are mounted to the oem mount so they should be as safe as the oem belts. Which I assume were added as an after thought and were not really safe to begin with. Untitled by Nick Wood, on Flickr They are much more comfortable and certainly more convenient. Now we just need to come up with some sort of mount or guide that we can attach to the headrest to keep the belts in place. Something removable of course. Untitled by Nick Wood, on Flickr
	Appreciate 4 MmmmmM22666.00 happyjack1758.50 chassis8066.50 wdb5074.50 Quote

05-10-2021, 09:09 AM	#236
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	I didn't do much this weekend, we had a friends bday and mothers day. I wasnt allowed to do too much car/shop related stuff. We did get the seat belt holders in. Untitled by Nick Wood, on Flickr These are just simple leather straps that are held on to the headrest with velcro. The seat belt is always were I want it, but it could break free in the case of an accident. I thought it was a pretty good solution. Untitled by Nick Wood, on Flickr We also adjusted the rear brakes so I took it on a little drive to test it out Sunday afternoon. I got some pretty awful news about a friend Sunday morning, it was nice to clear my head a little. Its also really hard to find a good shady spot for photos around town since the tornado, this was the best I could do. Untitled by Nick Wood, on Flickr It will hopefully make its cars and coffee debut, this coming Saturday.
	Appreciate 7 overcoil3121.00 happyjack1758.50 MmmmmM22666.00 chassis8066.50 wdb5074.50 Fakemike372.00 2000cs3905.00 Quote

05-12-2021, 07:02 AM	#237
CJ421 Brigadier General 1894 Rep 4,198 Posts Drives: BMW G80 M3 Join Date: Feb 2011 Location: PA, USA iTrader: (1) Garage List 2024 BMW M3 Sedan [9.67]	What an awesome build. The E9's lines are classic. Love the color combo. Charles __________________ 2024 BMW M3 Sedan Frozen Pure Grey II/Fjord Blue, 6MT Past: 2021 Z4 M40i Frozen Grey II/Black Alcantara \| 2017 F30 340i Mineral Gray/Coral Red, 6MT \| 2011 E92 335i Le Mans Blue/Black, 6MT
	Appreciate 0 Quote

05-12-2021, 07:20 AM	#238
mapleleaf1773 First Lieutenant 423 Rep 411 Posts Drives: 2011 BMW 328i XDrive Join Date: Jan 2021 Location: West Virginia iTrader: (0) Garage List 2011 BMW 328i XDrive [0.00]	Simply a beautiful piece of machinery and a amazing job you have done. Its gorgeous. I'm not a huge James Bond guy but I feel like Bond would pop out approaching the jet (a few photos back). You sir have a piece of history
	Appreciate 0 Quote

05-16-2021, 01:24 PM	#239
TAZ007 Colonel 1857 Rep 2,760 Posts Drives: 2021 Z4 M40 Join Date: May 2021 Location: Texas iTrader: (0) Garage List 2021 Z4 M40 [5.00]	Excellent car, rebuild, and thread. Thank you for sharing. I enjoyed the story.
	Appreciate 0 Quote

05-16-2021, 03:20 PM	#240
NorthernDancer Colonel 890 Rep 2,313 Posts Drives: 08 Sedona 128 & 06 330xiT 6MT Join Date: Apr 2011 Location: Ottawa On Canada iTrader: (3)	Great story and great pics. Very appreciate your efforts here. Have you ever read Rob Siegel's E9 restoration story?
	Appreciate 1 MPOWER52664778.00 Quote

05-17-2021, 09:06 AM	#241
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Saturday I took the E9 to its first cars and coffee. It ran great and was a huge hit. I parked, and by the time I got out of the car, I was in 3 conversations. I didnt get a chance to take any pictures or really even walk around. I ducked out a little early and grabbed some BBQ with my buddy. Untitled by Nick Wood, on Flickr I wanted to drive around for a bit more after lunch but people have been drinking gas around here so the e9 was running a little low. On the way back to the shop I noticed people pumping gas at a station so I stopped... They had gas!!! Untitled by Nick Wood, on Flickr Since the tank was full, I cruised around for a bit and put some real miles on the car for the first time. The Italian tune ups seem to be helping a lot, its running, starting and smelling better. My inlaws had their anniversary this weekend, and we had the twins baptized by my wifes preacher grandma, so my brother in-law was in town. I stopped by and showed them the car and snapped a quick pick while I was there. Untitled by Nick Wood, on Flickr The nardi wheel and coco mats should be in soon but its running like a top now. It such a good car. Last edited by MPOWER5266; 05-17-2021 at 09:14 AM..
	Appreciate 6 tracer bullet3745.50 happyjack1758.50 Fakemike372.00 MmmmmM22666.00 wdb5074.50 spazzyfry1235015.00 Quote

05-17-2021, 10:19 AM	#242
happyjack Captain 1759 Rep 923 Posts Drives: '21 F87 M2C 6MT Join Date: Nov 2017 Location: old line state iTrader: (0) Garage List 2015 MINI Hatch 5-door [10.00] 2021 BMW M2 Competi ... [9.75] 2023 BMW X5 xDrive40i [10.00] 2017 BMW X3 xDrive28i [10.00]	amazing resto! thanks for bringing us along for the ride! __________________ my garage: '23 G05 xDrive40i m-sport; '21 F87 M2C, 6MT; '17 F25 x-drive28i SAV; '15 F55 mini hatch 5-door retired: '87 E30 MT 'vert; '92 E36 sedan; '99 E36 MT 'vert; '06 E90 x-drive sedan; '07 E83 x-drive30 SAV; '09 E91 x-drive wagon; '12 E89 Z4 MT M-sport; '15 F22 sport line
	Appreciate 0 Quote