[Southtown]

Originally Posted by DrewNewM2

Damn that’s low! looks good. I’m another inch higher in front on KW HAS and Maxton lip. I can probably so a bit lower but already scraping my driveway if I forget to enter/exit from the correct angle.

Yeah I have to pull into my driveway just right haha

[DrewNewM2]

Originally Posted by Southtown

Yeah I have to pull into my driveway just right haha

Wow that’s close. I’ll have to get a pic of my driveway entry angle. I have a bit of a hill but It’s not that close for sure. My lip was only like $200 though so less stress.

[MADBMWX5MC]

Originally Posted by 40 Cylinders

HAS 15mm

Excellent side profile!

[Celestion]

Originally Posted by Silverlining_m2

M Perf HAS, all the way down, but no spacers.

What side-skirt is this? Looks great

[Southtown]

Pic

[Silverlining_m2]

Originally Posted by Celestion

What side-skirt is this? Looks great

Thanks. I tried to look around for something the side flip up flair, so many of them have. I don't remember the name, but it's from Autotecknic. I really like their stuff. I once recieved a cf antenna cover from them, and the clear coat came off on a spot. Couple months later. They replaced it, no questions. Never had any issue with anything else they have sent me. Nice weave. Close to oem. Good color. Better price than nearly all good quality cf companies. Better quality than all cheaper cf companies.

[kevinG87]

Ohlins R/T.
12mm spacers all around.
Still looking around for some nice wheels.
Have been looking at Works L1 3p. Gunmedal face with gold polish lip. Anyone running that? Can you share some pictures please.

[JMcLellan]

Here is my G87 with the MP HAS at the default port-installed drop of ~10mm. Spacers are 15mm fronts, 18mm rears. Stock wheels with the factory Michelin PS4's. I could probably go a little lower with the HAS kit without rubbing but this is the look I was going for. I really need to pick up some rock guards now. Any recommendations on what to get would be appreciated.

[Ronin76]

Originally Posted by JMcLellan

Here is my G87 with the MP HAS at the default port-installed drop of ~10mm. Spacers are 15mm fronts, 18mm rears. Stock wheels with the factory Michelin PS4's. I could probably go a little lower with the HAS kit without rubbing but this is the look I was going for. I really need to pick up some rock guards now. Any recommendations on what to get would be appreciated.

Looks so good. A lot of people have lowered their cars all the way down which got me nervous that 10mm would not be enough but seeing these pics and other at stock port installed hieght I am feeling a whole lot better!!

[spademonkey]

Just got my new HRE RC100’s in Gloss White Gold put on, 19x10.5 all around with et12 front and et4 rear, 285/35-19 RE-71RS tires, and MP HAS Kit for the springs (port installed last April)
Dropping off the car for HRE Open house this weekend 😁🤙

[71dsp]

MP HAS fully lowered, but they haven’t fully settled. Only 50 miles on it since installation.

[Geighty7]

What do you think?

[AndyVTForged]

Customers G87 M2 on our 20x10/11 VTForged RST-20 Comp Spec 2-Piece in Brushed/Polished Config:

[VFJon]

Volare Forged Wheels
VF008-2
20x10
20x11

Lowered on MSS HAS Kit

[tylerdurdem]

Which MSS kit? Hybrid? If so, how do you like the setup?

[Ehloo]

looking pretty damn sexy. These custom built?

Originally Posted by Geighty7

What do you think?

[M Division]

Lowered on Eibachs springs all four corners

[FreeAgent]

Where are you all going for an alignment after installing springs? I called a few independent shops and they are saying I need to go to the dealer and have them do it since they will have to reset the steering angle sensor. Is that correct? I'd rather not take it to the dealer if I don't have to.

[anthemavm]

KW HAS with 18mm spacers around.

[Digitalprty]

Originally Posted by anthemavm

KW HAS with 18mm spacers around.

Are those bi-color 930m wheels? How did you get the black spokes colored in? Looks great!

[anthemavm]

Originally Posted by Digitalprty

Are those bi-color 930m wheels? How did you get the black spokes colored in? Looks great!

They are the 825m,as I couldn't find bi-color 930 at the time.

[Digitalprty]

Originally Posted by anthemavm

They are the 825m,as I couldn't find bi-color 930 at the time.

Interesting. Looks better than the bi-color 930m, in my opinion. I plan to swap mine out next year to a simpler 5 spoke Y design. These are a bitch to clean.