[AZG87]

Originally Posted by izzyM2

so are we to expect rubbing on 19" upfront. Then it means worst with 20"s?

MP HAS port installed drop at 10mm, still running the oem 275s up front, 19×10+11 SLAs. Zero rub.

Wanting to go 285 up front at some point, wonder if height or camber adjustment may allow for this without rub. Thoughts AndyVTForged ?

[VegasG42]

Not trying to be a wise guy - but why are people trying to run such a wide tire up front ?

[AndyVTForged]

Originally Posted by VegasG42

Not trying to be a wise guy - but why are people trying to run such a wide tire up front ?

Few reasons that some may try to run the 285 up front. Some may be wanting to run it for track purposes, others may be wanting to run it to have a little more sidewall up front. Tires are a personal preference thing and luckily on a car like the G87 M2 (being RWD), you have many choices to get the look and feel you want. On AWD vehicles, it's a bit more tricky since you have to keep the overall diameter front to back similar.

[AndyVTForged]

New drop! Can't wait to see a G87 M2 on these!! GS-13 Aero Forged Monos:

[BroDoze]

^^ BARF

Do they come with a personal brake dust wheel cleaner?

[jessejericho]

Originally Posted by BroDoze

^^ BARF

Do they come with a personal brake dust wheel cleaner?

lol I think they look super cool, but yes...

[AZG87]

Originally Posted by GregW / Oregon

So as I posted previously, with the 19x9.5"+5 VT Forged SL-As and 285/35s up front at stock ride height I was getting rubbing on the fender liner at not quite full lock which made very rude and embarrassing sounds. It was enough to break the plastic louvers on one side. The rubbing is confined to a small area near the outside of the liner and I considered doing a mod myself but did not have the bandwidth right now, so I got the very expensive RKP modified liners from IND.

The following photos show 1) & 2) the area of rubbing, 3) the new liners, 4) using a heat gun and dolly to bend the ridged area, 5) the wheel well with liner removed, and 6) new liner in place.

The result was successful, but there is still only about a millimeter clearance at that raised ridge area, but slight contact is not going to hurt anything. I am concerned that the open mesh of the new liner is going to let more debris through coming off the tire compared the the angled louvers.

Greg which 285s did you go with up front? Just curious if side wall difference played a role?

[ScottyRyan2019]

Originally Posted by AndyVTForged

New drop! Can't wait to see a G87 M2 on these!! GS-13 Aero Forged Monos:

Needs to come with a set of ISWEEP 1500s because I'm not going to clean something like these! 😳

[ourlee]

Originally Posted by jessejericho

lol I think they look super cool, but yes...

This is funny

[Carefree]

Originally Posted by AndyVTForged

New drop! Can't wait to see a G87 M2 on these!! GS-13 Aero Forged Monos:

Available in one color only:
Dusty Scarlet

[CJ]

Went with a classic 5 spoke

[izzyM2]

Can we get the 5 spokes in various colors as well?

[GregW / Oregon]

Originally Posted by AZG87

Greg which 285s did you go with up front? Just curious if side wall difference played a role?

Michelin PS4S 285/35-19 on 9 1/2 +5s. Still a tiny bit of rubbing at full lock even with modified fender liners.

[Southtown]

Originally Posted by izzyM2

Can we get the 5 spokes in various colors as well?

Yes

[Gdubb]

Finally installed. I’ve had them for a week lol

[*bimmervibe]

Originally Posted by Click_ID

Ohhhhhh Hellloooooooooooooooooo
P4s all around, needs Toyo's after the E50 tune.......
9.5/19 -285
11/20- 315

Sorry if I missed it in other posts but can you share the offset for these and if you have any rubbing? What’s your suspension set up? I have MP HAS

[AndyVTForged]

First ever set of GT-9 Comps finished up for a G87 M2 build!

[AndyVTForged]

Also just got a few photos of a RST-20 Comp Spec setup on this frozen black G87 M2:

[NewToM]

Just put in my order for RS-S in gloss bronze with matching carbon caps. The variety and ability to customize with a quick return sold it. Can’t wait. Every question answered.

[AndyVTForged]

Originally Posted by NewToM

Just put in my order for RS-S in gloss bronze with matching carbon caps. The variety and ability to customize with a quick return sold it. Can’t wait. Every question answered.

Thank you for the order! Can't wait to get these built for you!

[Southtown]

Kind of wish I would have tried something other than SL-As now.

[NewToM]

Really excited for this look on BG!