What did you do to your M2 today? (G87 Edition)

izzyM2 · 04-11-2024, 07:23 PM

[QUOTE=apez;31063953]The side markers look great. What material did you use? What %?

I found this from a YouTuber who did his sidemarkers. If you want it darker just double it up. The instruction manual says no need to use heat but I still did.
https://a.co/d/24A90Sp

Cefoskey · 04-11-2024, 09:27 PM

Installed IND Painted Center Bumper Trim (V1) and I must say, this is how BMW should have delivered from the factory.

Also added the Weathertech trunk liner - definitely better than BMW OEM.

BroDoze · 04-11-2024, 09:49 PM

Looks great! ^^

LAGWAGN · 04-11-2024, 09:57 PM

Buying a trunk liner is something I’ve NEVER considered, until now.

ScottyRyan2019 · 04-11-2024, 10:13 PM

Quote:

Originally Posted by LGWGN

Buying a trunk liner is something I’ve NEVER considered, until now.

That is purdy 👍

MineralGreyMetallic · 04-11-2024, 11:54 PM

Quote:

Originally Posted by Cefoskey

Installed IND Painted Center Bumper Trim (V1) and I must say, this is how BMW should have delivered from the factory.

Also added the Weathertech trunk liner - definitely better than BMW OEM.

Oh yeah, I need that trunk liner.

One thing I miss about my F87 is the trunk net. It would prevent things from sliding all over the place.

Is there anything similar for the G87?

TT0997 · 04-12-2024, 02:18 AM

Just went to take a Quick Look after 7 months of waiting my order… delivery tomorrow !

Not visible in 4 firsts pictures : M performance Rear seat cover, Which have been installed a couple of hours after my visit.
My SA only sent me a small teaser of it (last picture).

Can’t wait !

izzyM2 · 04-12-2024, 10:42 AM

Quote:

Originally Posted by MineralGreyMetallic

Oh yeah, I need that trunk liner.

One thing I miss about my F87 is the trunk net. It would prevent things from sliding all over the place.

Is there anything similar for the G87?

https://a.co/d/7OPpSQN

NoMoreVW · 04-12-2024, 02:53 PM

I added the IND painted insert and put on 3/5 of the Zunsport grill inserts.

I foolishly put on the center one first before doing the inner center inserts and I can’t get those in. I saw BMW DIY Guys video on YouTube showing that you should do the center pierce last.

If anyone has any suggestions to getting those in, I’d love to hear them.

Lauren8 · 04-12-2024, 06:14 PM

Finally got around to PPF the car.

MASHCT · 04-12-2024, 06:36 PM

Quote:

Originally Posted by NoMoreVW

I added the IND painted insert and put on 3/5 of the Zunsport grill inserts.

I foolishly put on the center one first before doing the inner center inserts and I can’t get those in. I saw BMW DIY Guys video on YouTube showing that you should do the center pierce last.

If anyone has any suggestions to getting those in, I’d love to hear them.

Amazing how that one little change to the bumper color makes a WORLD of different. That really looks good!

xtougher · 04-12-2024, 06:53 PM

Quote:

Originally Posted by NoMoreVW

I added the IND painted insert and put on 3/5 of the Zunsport grill inserts.

I foolishly put on the center one first before doing the inner center inserts and I can’t get those in. I saw BMW DIY Guys video on YouTube showing that you should do the center pierce last.

If anyone has any suggestions to getting those in, I’d love to hear them.

Yeah, liking that painted piece!

NoMoreVW · 04-12-2024, 08:58 PM

Quote:

Originally Posted by xtougher

Yeah, liking that painted piece!

Thanks!

NoMoreVW · 04-12-2024, 08:59 PM

Quote:

Originally Posted by MASHCT

Amazing how that one little change to the bumper color makes a WORLD of different. That really looks good!

Appreciate it! I was a little worried when I put it on that it lost some of the aggression, but I like it.

anthemavm · 04-13-2024, 11:57 AM

Quote:

Originally Posted by Cefoskey

Installed IND Painted Center Bumper Trim (V1) and I must say, this is how BMW should have delivered from the factory.

Also added the Weathertech trunk liner - definitely better than BMW OEM.

How long was the wait from IND on the bumper insert?

JABCAT · 04-13-2024, 12:24 PM

Quote:

Originally Posted by NoMoreVW

I added the IND painted insert and put on 3/5 of the Zunsport grill inserts.

I foolishly put on the center one first before doing the inner center inserts and I can’t get those in. I saw BMW DIY Guys video on YouTube showing that you should do the center pierce last.

If anyone has any suggestions to getting those in, I’d love to hear them.

You have to pre-bend the tabs. I had them in for a while, but they don't fit the shape of the opening perfectly, so I took them out.

JABCAT · 04-13-2024, 12:26 PM

Quote:

Originally Posted by TT0997

Just went to take a Quick Look after 7 months of waiting my order… delivery tomorrow !

Not visible in 4 firsts pictures : M performance Rear seat cover, Which have been installed a couple of hours after my visit.
My SA only sent me a small teaser of it (last picture).

Can’t wait !

The cf headrest pieces look nice. I added the same pieces from Aliexpress for a fraction of the price - just don't have the MPerformance logo.

Mr.McNutty · 04-13-2024, 05:04 PM

For those with bucket seats, has anyone done anything to protect them? Specifically the outside bolster and seatbelt area?

I know IND makes a bolster protector, but $300 seems a bit steep. At one point I saw a set on ebay that includes 1 bolster cover and 1 seatbelt (shoulder area) cover, but can't seem to find it now.

2600 miles in, I've already noticed some very slight wear in both places.

Cefoskey · 04-13-2024, 05:27 PM

Quote:

Originally Posted by anthemavm

How long was the wait from IND on the bumper insert?

Exactly 1 month - 11 MAR to 11 APR.

Mr.McNutty · 04-13-2024, 06:04 PM

Quote:

Originally Posted by izzyM2

I just set up one of the preselected auto seat position button far enough so I don’t hit those areas during egress and ingress.

I also saw this product, looks like a good solution for the hard to reach seat belt with the buckets.

https://www.ebay.com/itm/38684537830...mis&media=COPY

Thanks for the input. I just ordered something similar for the seatbelt area.

Do you just have the default seat position set all the way back then when you get in you hit the other preset to move the seat back into position?

I get into the car pretty gingerly, but I'm also worried about rubbing my leg on the wheel while I'm avoiding the bolster.

izzyM2 · 04-13-2024, 06:20 PM

[QUOTE="Mr.McNutty;31070855"]Thanks for the input. I just ordered something similar for the seatbelt area.

Do you just have the default seat position set all the way back then when you get in you hit the other preset to move the seat back into position?

I get into the car pretty gingerly, but I'm also worried about rubbing my leg on the wheel while I'm avoiding the bolster.

I do the opposite. My number 1 seat position is my driving position, then button 2 the seat is set positioned back and low and the back bolster is angled almost 45 degrees. I come in, push button 1, it automatically moves to my driving then I push button 2 after I turn off the car before exiting. If you push it when the engines are off you don’t need to hold it. It sounds cumbersome but it’s really not.

Endz24 · 04-13-2024, 11:02 PM

Decided to go with some new shoes for the summer tires.

Vossen HF5 19x9.5ET10/20x10.5ET10 in satin silver

Had the iSweep 1500s installed at the same time. Thanks to the forum for turning me on to these. Night and day difference. Significantly less dust.

Only other mods that were done prior were front PPF, ceramic, 35% tint and Bavsound woofers.

04-11-2024, 07:23 PM	#2773
izzyM2 Major 833 Rep 1,308 Posts Drives: 24’M2/21ID.4/21’MacanGTS Join Date: Sep 2012 Location: SoCal iTrader: (4)	[QUOTE=apez;31063953]The side markers look great. What material did you use? What %? I found this from a YouTuber who did his sidemarkers. If you want it darker just double it up. The instruction manual says no need to use heat but I still did. https://a.co/d/24A90Sp __________________ /// 24' M2 w/ buckets and shtick ///
	Appreciate 0 Quote

04-11-2024, 09:27 PM	#2774
Cefoskey Private First Class 564 Rep 101 Posts Drives: 2024 BMW M2 Join Date: Mar 2024 Location: DFW iTrader: (0) Garage List 1998 Porsche 944 [10.00] 2024 BMW G87 M2 [10.00]	Installed IND Painted Center Bumper Trim (V1) and I must say, this is how BMW should have delivered from the factory. Also added the Weathertech trunk liner - definitely better than BMW OEM. Last edited by Cefoskey; 04-11-2024 at 09:53 PM..
	Appreciate 10 iifymbro1020.00 Tag20007.00 BokTroy163.50 MineralGreyMetallic1081.00 Frank414.50 MASHCT1376.50 ExplodingFires46.00 Mr. Hankey1627.50 GuyOh1271.00 71dsp99.00 Quote

04-11-2024, 09:49 PM	#2775
BroDoze Colonel 2148 Rep 2,290 Posts Drives: 2025 M2 LCI Join Date: Nov 2009 Location: CO iTrader: (0)	Looks great! ^^ __________________ ///M
	Appreciate 0 Quote

04-11-2024, 09:57 PM	#2776
LAGWAGN Lieutenant 629 Rep 578 Posts Drives: 2001 M Roadster, '24 BSM M2 Join Date: Oct 2013 Location: Dallas, TX iTrader: (1)	Buying a trunk liner is something I’ve NEVER considered, until now. __________________ '01 M Roadster, '24 BSM M2
	Appreciate 1 BokTroy163.50 Quote

04-12-2024, 02:18 AM	#2779
TT0997 Private 153 Rep 93 Posts Drives: EU G87 M2 Join Date: Feb 2020 Location: France iTrader: (0)	Just went to take a Quick Look after 7 months of waiting my order… delivery tomorrow ! Not visible in 4 firsts pictures : M performance Rear seat cover, Which have been installed a couple of hours after my visit. My SA only sent me a small teaser of it (last picture). Can’t wait ! Attached Images
	Appreciate 5 Frank414.50 Cefoskey564.00 lithe32.50 Bumpinjeep6215.50 ScottyRyan20191657.50 Quote

04-12-2024, 02:53 PM	#2781
NoMoreVW Private First Class 141 Rep 178 Posts Drives: Current: VW R32, GTI Join Date: Jul 2023 Location: MN iTrader: (0)	I added the IND painted insert and put on 3/5 of the Zunsport grill inserts. I foolishly put on the center one first before doing the inner center inserts and I can’t get those in. I saw BMW DIY Guys video on YouTube showing that you should do the center pierce last. If anyone has any suggestions to getting those in, I’d love to hear them. Attached Images Last edited by NoMoreVW; 04-12-2024 at 03:07 PM..
	Appreciate 5 JMcLellan2737.50 MASHCT1376.50 xtougher659.00 Tag20007.00 Frank414.50 Quote

04-12-2024, 06:14 PM	#2782
Lauren8 Private 194 Rep 90 Posts Drives: 992 and F87 Join Date: Apr 2020 Location: Socal iTrader: (0)	Finally got around to PPF the car. Attached Images __________________ 96: 318ti \|01: 325 \|02: 325w \|03: 330xi \|04: X3 \|05: X5 \|06: X5 4.4, X3, 330 \|08: 328 \|11: 135 \|12: X3, X6, M3, 650, 997 \|13: X6M, 640GC, M3 LRE, M6, M5, 135is, 328 \|14: X1, 981 \|15: M4 \|16: 981 \|17: M2, F13 \|20: M2c, 982, M2c l 22: 992, G42 \| 23: G80\| 24: G87
	Appreciate 2 Cefoskey564.00 apez819.00 Quote

04-13-2024, 05:04 PM	#2790
Mr.McNutty Second Lieutenant 427 Rep 244 Posts Drives: E82 135i, G87 M2 Join Date: Jun 2023 Location: Bay Area, CA iTrader: (0) Garage List 2024 BMW M2 [10.00] 2008 BMW 135i [10.00]	For those with bucket seats, has anyone done anything to protect them? Specifically the outside bolster and seatbelt area? I know IND makes a bolster protector, but $300 seems a bit steep. At one point I saw a set on ebay that includes 1 bolster cover and 1 seatbelt (shoulder area) cover, but can't seem to find it now. 2600 miles in, I've already noticed some very slight wear in both places. __________________ 2024 M2.....\| BSM \| 6MT \| Buckets \| MP HAS \| AA Midpipe 2008 135i...\| BSM \| 6MT \| M-Sport \| Stock AF Old username: OnesAndEyes
	Appreciate 0 Quote

04-13-2024, 06:20 PM	#2793
izzyM2 Major 833 Rep 1,308 Posts Drives: 24’M2/21ID.4/21’MacanGTS Join Date: Sep 2012 Location: SoCal iTrader: (4)	[QUOTE="Mr.McNutty;31070855"]Thanks for the input. I just ordered something similar for the seatbelt area. Do you just have the default seat position set all the way back then when you get in you hit the other preset to move the seat back into position? I get into the car pretty gingerly, but I'm also worried about rubbing my leg on the wheel while I'm avoiding the bolster. I do the opposite. My number 1 seat position is my driving position, then button 2 the seat is set positioned back and low and the back bolster is angled almost 45 degrees. I come in, push button 1, it automatically moves to my driving then I push button 2 after I turn off the car before exiting. If you push it when the engines are off you don’t need to hold it. It sounds cumbersome but it’s really not. __________________ /// 24' M2 w/ buckets and shtick ///
	Appreciate 0 Quote

04-13-2024, 11:02 PM	#2794
Endz24 New Member 20 Rep 21 Posts Drives: '24 BSM M2 Join Date: Jun 2017 Location: MN iTrader: (0)	Decided to go with some new shoes for the summer tires. Vossen HF5 19x9.5ET10/20x10.5ET10 in satin silver Had the iSweep 1500s installed at the same time. Thanks to the forum for turning me on to these. Night and day difference. Significantly less dust. Only other mods that were done prior were front PPF, ceramic, 35% tint and Bavsound woofers. Attached Images
	Appreciate 5 kev1293.50 HulkMansfield73.50 LAGWAGN629.00 ScottyRyan20191657.50 AZG871157.50 Quote