[it.g.ma_g87]

couple m2s

[Ronin76]

Originally Posted by Ehloo

AST has with a little more room to go lower. 20x10, 20x11 BC forged

Wheels look great

[Carefree]

FYI to all port installed HAS option owners.

Our car at dealer today for 1 year oil change. Asked tech to check spring position. Car was fully lowered at the port.

YMMV

[Ronin76]

Originally Posted by Dave07997S

Eibach Pro Kit 15mm spacers allaround.

Is this the kit you purchased?

https://eibach.com/product/E10-20-057-01-22?epsid=3456

[InTheSound]

Conservative drop with KW HAS.

[Mikesbimmer]

MPHAS max low

[youloze]

From video shoot this past weekend

[Dave07997S]

Originally Posted by Ronin76

Is this the kit you purchased?

https://eibach.com/product/E10-20-057-01-22?epsid=3456

That's it

[Geighty7]

H&R VTF

[wife-dog-bmw]

Originally Posted by JMcLellan

Here is my G87 with the MP HAS at the default port-installed drop of ~10mm. Spacers are 15mm fronts, 18mm rears. Stock wheels with the factory Michelin PS4's. I could probably go a little lower with the HAS kit without rubbing but this is the look I was going for. I really need to pick up some rock guards now. Any recommendations on what to get would be appreciated.

Your ride looks great. I picked up my car on Halloween. It also has michelins and MPHAS (assuming the 10MM drop).

I am curious what your measurements are to the fender and also the front lip. I am right at 27" from the ground at the fender and 6.375 on the front. Not sure why the photo is upside down......

I purchased 15MM spacers and looking at everything, I am nervous to put them on and drop the car down. Everything I read makes it seem that I should be fine.

Curious what others are measuring. You figure are cars are all the same (until you mod it) from the top of the wheel well down.

Thanks!

[JMcLellan]

Originally Posted by wife-dog-bmw

Your ride looks great. I picked up my car on Halloween. It also has michelins and MPHAS (assuming the 10MM drop).

I am curious what your measurements are to the fender and also the front lip. I am right at 27" from the ground at the fender and 6.375 on the front. Not sure why the photo is upside down......

I purchased 15MM spacers and looking at everything, I am nervous to put them on and drop the car down. Everything I read makes it seem that I should be fine.

Curious what others are measuring. You figure are cars are all the same (until you mod it) from the top of the wheel well down.

Thanks!

I just measured. All 4 wheel wells are exactly 27 inches and I'm getting the same height from front lip to ground.

I'd say go for it. If it ends up rubbing you can change the spacers or raise it back up.

[javistor]

H&R's

[M_Power Rob]

Originally Posted by wife-dog-bmw

Your ride looks great. I picked up my car on Halloween. It also has michelins and MPHAS (assuming the 10MM drop).

I am curious what your measurements are to the fender and also the front lip. I am right at 27" from the ground at the fender and 6.375 on the front. Not sure why the photo is upside down......

I purchased 15MM spacers and looking at everything, I am nervous to put them on and drop the car down. Everything I read makes it seem that I should be fine.

Curious what others are measuring. You figure are cars are all the same (until you mod it) from the top of the wheel well down.

Thanks!

I wouldn't assume its a 10mm drop. Many have found out when they went to lower that they were dropped all the way at the port (mine were).

[DrewNewM2]

KW HAS. Not max low.

[Ehloo]

car looks great with those super concave BC’s. i couldn’t get away without rocking a 3 piece with big step lip atleast with one of my wheel setups . don’t always get lucky with a wide and low offset config

Originally Posted by youloze

From video shoot this past weekend

[wife-dog-bmw]

Originally Posted by JMcLellan

I just measured. All 4 wheel wells are exactly 27 inches and I'm getting the same height from front lip to ground.

I'd say go for it. If it ends up rubbing you can change the spacers or raise it back up.

Fits like a dream. Dirty wheels.

[JMcLellan]

Originally Posted by wife-dog-bmw

Fits like a dream. Dirty wheels.

Sweet. Glad that it worked for you. Makes me think about dropping my MP HAS all the way.

[StallMaster]

MP HAS All the way

Ig- g87.aj

[Ronin76]

Originally Posted by Ehloo

AST has with a little more room to go lower. 20x10, 20x11 BC forged

I can’t stop staring at this. The AP with the 2 piece looks so clean. I want to get Twiligjt Purple so bad but seeing this is really making my want to go copy lol.

[xtougher]

Originally Posted by M_Power Rob

I wouldn't assume its a 10mm drop. Many have found out when they went to lower that they were dropped all the way at the port (mine were).

hmm...What's the easiest way to tell?

This whole time, I was assuming it was the 10mm drop.

[Mikesbimmer]

Originally Posted by M_Power Rob

I wouldn't assume its a 10mm drop. Many have found out when they went to lower that they were dropped all the way at the port (mine were).

Originally Posted by wife-dog-bmw

Fits like a dream. Dirty wheels.

Isweep 1500 needed :-)

[jmg]

Originally Posted by VFJon

Lowered all the way down on AST adjustable springs with 20" wheels

How are you finding the AST setup? I'm debating to stick with my KW or go AST.

Also, is this the unit17 spoiler? Looks really good!