My 1996 Honda Civic build

Alfisti · 11-18-2021, 10:11 AM

17's and silver lip, the dark one just looks wrong.

jmack · 11-18-2021, 10:35 AM

Congrats on finishing your build, looks great!

racerbruce · 11-19-2021, 12:11 PM

Congrats!
Forgive me for missing this....what is the HP now??

Nashville · 11-19-2021, 12:53 PM

Quote:

Originally Posted by racerbruce

Congrats!
Forgive me for missing this....what is the HP now??

185

KennyFSU · 11-19-2021, 12:58 PM

That's pretty good. Back in the 90s I had a B18C1 in my EG hatch and with almost every bolt-on + tune I could only squeeze out 170whp lol, still was a fun little car.

Nashville · 11-19-2021, 01:02 PM

Just a little photo dump

racerbruce · 11-19-2021, 01:37 PM

Quote:

Originally Posted by Nashville

185

What is the appx vehicle weight??

Nashville · 11-19-2021, 02:45 PM

Quote:

Originally Posted by racerbruce

Quote:

Originally Posted by Nashville

185

What is the appx vehicle weight??

About 2200 lbs

racerbruce · 11-19-2021, 03:30 PM

Quote:

Originally Posted by Nashville

About 2200 lbs

2200 / 185 = 11.9 Lbs per HP....it must be fast and must handle and stop incredibly well!

Nashville · 11-19-2021, 09:23 PM

Quote:

Originally Posted by racerbruce

Quote:

Originally Posted by Nashville

About 2200 lbs

2200 / 185 = 11.9 Lbs per HP....it must be fast and must handle and stop incredibly well!

Yes it's a riot! It's very raw and quite different (obviously) from my 330i. I have forgotten there's no ABS a few times and I'm constantly looking for a rear camera.

It's crazy how much these new cars can spoil you

Mileschandler · 11-22-2021, 03:10 AM

I wish you good luck in your instagram. This car is classic. I adore it

Nashville · 11-27-2021, 10:47 AM

I'm iffy on this sticker.

Going to my first cars and coffee next Saturday so I'm checking and making sure everything is tight.

E30saam · 11-27-2021, 03:17 PM

This is a fantastic build. Makes me miss my old vtec b series Hondas. Great call swapping in a B series over a K series. I love how raw the b series is and you can’t beat the solid linkage shifter. Fastline shifter is also the best shifter for the these Hondas. Makes me miss the shifter in my 2001 Integra GSR.

Nashville · 11-27-2021, 03:55 PM

Hell yeah! Love those confetti recaros too! Those are very hard to find

Nashville · 12-06-2021, 11:28 AM

Went to a local cars and coffee- and I haven't been in a few years but it seems a bit too organized for my liking. There's more people there that just have brand new cars rather than builds- but it was still fun I guess.

I picked up a J's racing strut bar, and an auto power roll bar that I'll install tomorrow- gonna be tricky with full interior

It goes well with the js racing valve cover.

Nashville · 12-22-2021, 05:01 PM

Installing a roll bar with full interior is no joke!
Glad I did it though.

beehmer101 · 12-22-2021, 06:39 PM

Quote:

Originally Posted by Nashville

Put the 17's on and still gotta adjust the ride height. Getting there!

Silver bullet looks great!!!!

///d · 12-23-2021, 12:52 AM

Just an FYI, and I'm not picking at it or anything, but since thats a bolt-in cage, and not a complete cage, if you wanted it for any regulated racing events it will likely not pass tech. It's a great build tho, would love to have had this back in my Honda days.

I do miss my Civic EX sometimes. It had a Z6 that for some reason was bullet proof and faster than any other SOHC around at the time. Hurt a lot of feelings in MN when I ran a 75 shot on it, then re-built it for boost but never got the chance to drop it back in after I had a guy do some body work and he botched the shit out of it and it destroyed all motivation. Motor went to a buddy that dropped it in a 91 hatch. He never had it properly tuned so it didn't run 100%, but he beat the hell out of it for many years before parking it, and it's been sitting ever since.

Nashville · 12-23-2021, 07:49 AM

Quote:

Originally Posted by ///d

Just an FYI, and I'm not picking at it or anything, but since thats a bolt-in cage, and not a complete cage, if you wanted it for any regulated racing events it will likely not pass tech. It's a great build tho, would love to have had this back in my Honda days.

I do miss my Civic EX sometimes. It had a Z6 that for some reason was bullet proof and faster than any other SOHC around at the time. Hurt a lot of feelings in MN when I ran a 75 shot on it, then re-built it for boost but never got the chance to drop it back in after I had a guy do some body work and he botched the shit out of it and it destroyed all motivation. Motor went to a buddy that dropped it in a 91 hatch. He never had it properly tuned so it didn't run 100%, but he beat the hell out of it for many years before parking it, and it's been sitting ever since.

Thanks for the heads up!

But I've stated earlier in the build that I will not be racing this car. It's all for looks, even though autopower says that these bars meet or exceed requirements for some racing series- figured it was good enough for the street

///d · 12-23-2021, 07:59 AM

Quote:

Originally Posted by Nashville

Thanks for the heads up!

But I've stated earlier in the build that I will not be racing this car. It's all for looks, even though autopower says that these bars meet or exceed requirements for some racing series- figured it was good enough for the street

Yeah the bars might meet spec as far as diameter, thickness, and weld type, but a lot of racing regs require welded in vs bolt in, and depending on the series they require full overhead and door bars also. But the mounting point is where I've seen the most people get kick back from tech. But, if you're not looking to race, then no harm done.

I will say though, if you run a harness be sure to mount it properly and at the proper shoulder strap angle. They are technically not legal for street use, but I've never known anyone to take heat for it. I find them uncomfortable and a pain for the street tho.

Nashville · 12-23-2021, 08:44 AM

Quote:

Originally Posted by ///d

Quote:

Originally Posted by Nashville

Thanks for the heads up!

But I've stated earlier in the build that I will not be racing this car. It's all for looks, even though autopower says that these bars meet or exceed requirements for some racing series- figured it was good enough for the street

Yeah the bars might meet spec as far as diameter, thickness, and weld type, but a lot of racing regs require welded in vs bolt in, and depending on the series they require full overhead and door bars also. But the mounting point is where I've seen the most people get kick back from tech. But, if you're not looking to race, then no harm done.

I will say though, if you run a harness be sure to mount it properly and at the proper shoulder strap angle. They are technically not legal for street use, but I've never known anyone to take heat for it. I find them uncomfortable and a pain for the street tho.

I won't be running a harness. OEM seatbelt only.
There's street cars that have OEM roll bars. The M4 GTS?

Thank you for the concern. Again, won't be racing this car at all

Cheers

TurboSid · 12-23-2021, 02:43 PM

checking progress and not disappointed. Looks great.

11-18-2021, 10:11 AM	#265
Alfisti Brigadier General 7002 Rep 3,311 Posts Drives: 2008 Saab 9-3 Combi Join Date: Nov 2014 Location: Toronto, Canada iTrader: (0)	17's and silver lip, the dark one just looks wrong.
	Appreciate 0 Quote

11-18-2021, 10:35 AM	#266
jmack First Lieutenant 549 Rep 384 Posts Drives: OG M2, E70 X5M Join Date: Oct 2018 Location: TN iTrader: (0)	Congrats on finishing your build, looks great!
	Appreciate 0 Quote

11-19-2021, 12:11 PM	#267
racerbruce Brigadier General 3881 Rep 3,004 Posts Drives: 21 X3 & 13 335is E93 Join Date: Dec 2009 Location: Seattle iTrader: (1)	Congrats! Forgive me for missing this....what is the HP now?? __________________ Racerbruce
	Appreciate 0 Quote

11-19-2021, 12:58 PM	#269
KennyFSU Captain 1103 Rep 736 Posts Drives: Lexus RC F Join Date: Nov 2019 Location: Florida iTrader: (0) Garage List 2016 BMW F22 M235xi [0.00] 1991 Suzuki Intrude ... [0.00]	That's pretty good. Back in the 90s I had a B18C1 in my EG hatch and with almost every bolt-on + tune I could only squeeze out 170whp lol, still was a fun little car. __________________ Estoril Blue E36M3 Mineral Grey M235ix/12.02 @ 115 Ultra White Lexus RC F
	Appreciate 0 Quote

11-19-2021, 01:02 PM	#270
Nashville BMW Sales 1113 Rep 458 Posts Drives: G20 Msport, 1996 Civic DX Join Date: Apr 2020 Location: Nashville, Tn iTrader: (0)	Just a little photo dump Attached Images __________________ G20, but I love my Honda
	Appreciate 3 racerbruce3880.50 Doctor_X1157.50 M3 boi3222.00 Quote

11-22-2021, 03:10 AM	#275
Mileschandler Registered 0 Rep 4 Posts Drives: volkswagen passat b6 Join Date: Oct 2021 Location: LA iTrader: (0)	I wish you good luck in your instagram. This car is classic. I adore it
	Appreciate 0 Quote

11-27-2021, 10:47 AM	#276
Nashville BMW Sales 1113 Rep 458 Posts Drives: G20 Msport, 1996 Civic DX Join Date: Apr 2020 Location: Nashville, Tn iTrader: (0)	I'm iffy on this sticker. Going to my first cars and coffee next Saturday so I'm checking and making sure everything is tight. Attached Images __________________ G20, but I love my Honda
	Appreciate 2 racerbruce3880.50 M3 boi3222.00 Quote

11-27-2021, 03:17 PM	#277
E30saam New Member 36 Rep 20 Posts Drives: E36 m3 and an e30 Join Date: Jul 2015 Location: Alpharetta ga iTrader: (0)	This is a fantastic build. Makes me miss my old vtec b series Hondas. Great call swapping in a B series over a K series. I love how raw the b series is and you can’t beat the solid linkage shifter. Fastline shifter is also the best shifter for the these Hondas. Makes me miss the shifter in my 2001 Integra GSR.
	Appreciate 0 Quote

11-27-2021, 03:55 PM	#278
Nashville BMW Sales 1113 Rep 458 Posts Drives: G20 Msport, 1996 Civic DX Join Date: Apr 2020 Location: Nashville, Tn iTrader: (0)	Hell yeah! Love those confetti recaros too! Those are very hard to find __________________ G20, but I love my Honda
	Appreciate 0 Quote

12-06-2021, 11:28 AM	#279
Nashville BMW Sales 1113 Rep 458 Posts Drives: G20 Msport, 1996 Civic DX Join Date: Apr 2020 Location: Nashville, Tn iTrader: (0)	Went to a local cars and coffee- and I haven't been in a few years but it seems a bit too organized for my liking. There's more people there that just have brand new cars rather than builds- but it was still fun I guess. I picked up a J's racing strut bar, and an auto power roll bar that I'll install tomorrow- gonna be tricky with full interior It goes well with the js racing valve cover. Attached Images __________________ G20, but I love my Honda
	Appreciate 5 racerbruce3880.50 ggunn9160.00 AlexFL7996.50 M3WC3848.00 M3 boi3222.00 Quote

12-22-2021, 05:01 PM	#280
Nashville BMW Sales 1113 Rep 458 Posts Drives: G20 Msport, 1996 Civic DX Join Date: Apr 2020 Location: Nashville, Tn iTrader: (0)	Installing a roll bar with full interior is no joke! Glad I did it though. Attached Images __________________ G20, but I love my Honda
	Appreciate 5 Red Bread4459.00 IllSic_Design2125.00 M3WC3848.00 jmack548.50 M3 boi3222.00 Quote

12-23-2021, 12:52 AM	#282
///d Captain 1898 Rep 619 Posts Drives: F15 35d M Sport Join Date: Jan 2017 Location: Minne-snow-ta iTrader: (0)	Just an FYI, and I'm not picking at it or anything, but since thats a bolt-in cage, and not a complete cage, if you wanted it for any regulated racing events it will likely not pass tech. It's a great build tho, would love to have had this back in my Honda days. I do miss my Civic EX sometimes. It had a Z6 that for some reason was bullet proof and faster than any other SOHC around at the time. Hurt a lot of feelings in MN when I ran a 75 shot on it, then re-built it for boost but never got the chance to drop it back in after I had a guy do some body work and he botched the shit out of it and it destroyed all motivation. Motor went to a buddy that dropped it in a 91 hatch. He never had it properly tuned so it didn't run 100%, but he beat the hell out of it for many years before parking it, and it's been sitting ever since. __________________ F15 35d M Sport (SOLD ) \| F30 328i \| 2020 Tacoma TRD Pro My Diesel Information Thread \| My Wheels, Tires, and Fitment Thread \| My Teardrop Camper Build \| My F15 Suspension Lift Thread Last edited by ///d; 12-23-2021 at 12:57 AM..
	Appreciate 0 Quote

12-23-2021, 02:43 PM	#286
TurboSid Brigadier General 1155 Rep 3,269 Posts Drives: 2022 M4Cx BSM/FR Join Date: Apr 2008 Location: Florida iTrader: (4) Garage List 2008 335i [0.00]	checking progress and not disappointed. Looks great. __________________ 2022 BSM/FR M4 Competition X-Drive 2017 MW/SO M4 ZCP [SOLD] • 2015 MW/SO M4 M-DCT FBO [SOLD] • 2011 AW/CR 335is DCT FBO [SOLD] • 2008 AW/CR 335i 6MT FBO [SOLD]
	Appreciate 0 Quote