[MineralGreyMetallic]

Originally Posted by ScottyRyan2019

I just had them do it while the car was in. The fasteners are supposedly a one use item so they put new ones on as well. I was able to use the stock wear indicators. The tech is a huge car but and gave me a double thumbs up on iSweep pads.

Did you go with 1500 or 2000, and how do they compare to the stock pads in terms of initial bite?

[xtougher]

Originally Posted by ScottyRyan2019

Didn't drive it much at all January until mid-March.

Makes sense. Forgot that we don't experience the same seasons. LOL

[ScottyRyan2019]

Originally Posted by xtougher

Makes sense. Forgot that we don't experience the same seasons. LOL

It's just a pleasure drive car for me. Has not seen rain or snow yet. Heck, my Mustang I had for almost 2.5 years never saw a snowflake or raindrop. 🤣

[ScottyRyan2019]

Originally Posted by MineralGreyMetallic

Did you go with 1500 or 2000, and how do they compare to the stock pads in terms of initial bite?

The 1500 mainly because it's street driven only and I wanted the low dust as the OEM pads were driving me crazy with these hard to clean wheels . I see no difference in the manner I drive between the OEM and 1500s. As for dust, have a 150 mile car cruise this Saturday so it'll give me a good idea as to how they compare.

[ScottyRyan2019]

Originally Posted by NoMoreVW

So normally $520? Sheesh.

Yeah, plus shop supplies and cost of fasteners. I did get a nice deal though.

[xtougher]

Originally Posted by ScottyRyan2019

It's just a pleasure drive car for me. Has not seen rain or snow yet. Heck, my Mustang I had for almost 2.5 years never saw a snowflake or raindrop. 🤣

Nice! That's definitely a difference maker. I'm daily driving this thing all over the place. I put over 2,400 miles so far, and it's been two months. I guess it's not egregious, but not low either.

Not complaining!

[ScottyRyan2019]

Originally Posted by Harlemknight1

What percentage tint did you go with?

20%. I did not touch the windshield so outside with the sun coming in through the windshield reflecting off the light cognac interior it won't appear quite as dark as if the interior was black.

[apez]

Shaved the louvers in the wheels liners with a super sharp chisel. No more rubbing!

Now as ready as I am going to get for my first G87 autocross day.

[Digitalprty]

Installed all the Zunsport grills (including for the oil cooler underneath). Also installed ISweep IS1500 pads in front. Getting confirmation if the rear pads need shims or not before installing.
Edit: rear pads installed

[AZG87]

Got the 3-piece carbon caps with ZB outer ring added to the SLAs.

[Cefoskey]

Originally Posted by AZG87

Got the 3-piece carbon caps with ZB outer ring added to the SLAS.

Which wing do you have there?

[AZG87]

Originally Posted by Cefoskey

Which wing do you have there?

That's the M performance one that was port installed with the other options.

[Cefoskey]

Originally Posted by AZG87

That's the M performance one that was port installed with the other options.

Hard to tell, is it carbon or black?

[AZG87]

Originally Posted by Cefoskey

Hard to tell, is it carbon or black?

That one is CF.

[LeggoRacing]

Got the wife to drive it on track today. Good times

[DarkNight707]

Originally Posted by Digitalprty

Installed all the Zunsport grills (including for the oil cooler underneath). Also installed ISweep IS1500 pads in front. Getting confirmation if the rear pads need shims or not before installing.

Once you ride the ISweep for a bit, let us know your impressions under the ISWeep thread. There are many of us getting ready to swap but undicided between 1500 and 2000.

[Bumpinjeep]

Evolution Racewerks mid pipe. Review and installation guide coming soon.

[Mr. Hankey]

Installed the Zunsport Oil cooler protector:





I also installed the IND Painted Center Bumper Trim (V1) and made my own radiator mesh while at it:

[Click_ID]

Buckets are in! pardon the mess.

[Montaver]

Originally Posted by Click_ID

Buckets are in! pardon the mess.

Very nice, which buckets are those? What mounting hardware did you use? Anymore pics?

[BimmerFix]

Originally Posted by Click_ID

Buckets are in! pardon the mess.

Perfecto , floor matts are sex too
Nicely done

[Geighty7]

Originally Posted by Click_ID

Buckets are in! pardon the mess.

Such a great looking bucket to compliment the center console and floor mat colorway. Excited to see a head on shot of the buckets!