My E9 2800cs restoration journal

happyjack · 04-18-2022, 09:55 AM

Quote:

Originally Posted by MPOWER5266

Small update, but I have been driving the hell out of the car and its good. Like really really good. The 5 speed completely changes it, much smoother and quieter. It also isnt leaking anything.... and I filled all the fluids so I know its not empty. I think its good to go for the vintage next month. Yesterday, I treated to to a quick bath and interior wipe down, it got covered in pollen last time I drove it.

great to hear she's running so well!!! congrats on your resto of such a beautiful car! lots of great work documented in this thread, and it's got to be satisfying to be enjoying the fruits of all that labor! thanks for bringing us along for the ride.

MPOWER5266 · 05-23-2022, 11:46 AM

This weekend was the annual trip to The Vintage. We didnt have too terribly much prep except for new brake pads on the front and an adjustment on the rear. I did give it a quick bath Thursday before heading out Friday morning.

Untitled by Nick Wood, on Flickr

All set.

Untitled by Nick Wood, on Flickr

I usually take one of my buckets full of cleaning supplies so I can clean the car up before the show, but a normal bucket wouldn't fit in the trunk. I stopped by the local detail garage and grabbed this shorter bucket and some smaller spray bottles.

Untitled by Nick Wood, on Flickr

Untitled by Nick Wood, on Flickr

Perfect fit.

Untitled by Nick Wood, on Flickr

The weekend was a blur, so much so that I didn't snap any pics. Friday we went to Greer to the CCA museum, then to the hotel in Asheville. Had dinner with some friends Friday night, and drank too much beer in the hotel parking lot. Saturday met up with some friends Saturday morning and after coffee, took back roads up to the show. We had a little rain heading back to the hotel after the vintage, but not too bad and ended the evening with more parking lot beers. We had a few little issues with the car. There is a stumble/hesitation that intermittently shows up for a short time if the car heat soaks. We swapped the coil and it was great for the rest of the weekend until about 2 miles from home. The ac could use a recharge and it has a little pull to the left under heavyish braking. All and all I am pretty happen with how it performed. We have some mods and maintenance planned soon, but we might wait until the winter and do it all at once. For now it just needs a good cleaning.

Untitled by Nick Wood, on Flickr

AR_Motorwerkz · 05-25-2022, 05:49 PM

Quote:

Originally Posted by MPOWER5266

This weekend was the annual trip to The Vintage. We didnt have too terribly much prep except for new brake pads on the front and an adjustment on the rear. I did give it a quick bath Thursday before heading out Friday morning.

All set.

Untitled by Nick Wood, on Flickr

I usually take one of my buckets full of cleaning supplies so I can clean the car up before the show, but a normal bucket wouldn't fit in the trunk. I stopped by the local detail garage and grabbed this shorter bucket and some smaller spray bottles.

The weekend was a blur, so much so that I didn't snap any pics. Friday we went to Greer to the CCA museum, then to the hotel in Asheville. Had dinner with some friends Friday night, and drank too much beer in the hotel parking lot. Saturday met up with some friends Saturday morning and after coffee, took back roads up to the show. We had a little rain heading back to the hotel after the vintage, but not too bad and ended the evening with more parking lot beers. We had a few little issues with the car. There is a stumble/hesitation that intermittently shows up for a short time if the car heat soaks. We swapped the coil and it was great for the rest of the weekend until about 2 miles from home. The ac could use a recharge and it has a little pull to the left under heavyish braking. All and all I am pretty happen with how it performed. We have some mods and maintenance planned soon, but we might wait until the winter and do it all at once. For now it just needs a good cleaning.

Really love your E9! Definitely a set of BBS Super RS would look great on this.

MPOWER5266 · 04-17-2023, 08:49 AM

I cant believe its almost been a year since my last post. The car has been perfect, but some small updates.. The drivers seat had a split that has been getting worse so we found a way to kinda "glue" it back together. We glued it and dyed it and it looks pretty good. We have a new seat cover that we will eventually install but I would like to keep the stock leather as long as I can.

Untitled by Nick Wood, on Flickr

Finally got around to getting this tag registered to the car. Its only like $5-10 to do this in Georgia so I figured why not?

Untitled by Nick Wood, on Flickr

And Saturday, while I was working, my dad took it to a local show and it won its first award.

Untitled by Nick Wood, on Flickr

I may have a lead on some wheels for it....

MPOWER5266 · 06-06-2023, 01:36 PM

Small update on the e9. Project cars are really never done....

The door cards are made of a compressed cardboard, and the drivers door was no longer holding the clips that attach it to the door. We found a company that was making new door cards out of wood. So we pulled the cards, pealed the pretty part off and glued it onto the wood panel.

Untitled by Nick Wood, on Flickr

While it was apart, we replaced the vent and main window seals.

Untitled by Nick Wood, on Flickr

And re-assembled.

Untitled by Nick Wood, on Flickr

Its looking a ton better and should last for years.

Untitled by Nick Wood, on Flickr

MPOWER5266 · 08-21-2023, 12:14 PM

Just a few small updates. The E9 has been on the lift for the better part of a month or so. We finally put a set of rear bumper under riders on. We are also fixing/replacing all of the trunk trim.

Untitled by Nick Wood, on Flickr

While it was up waiting on parts, we replaced the rear brake cylinders and lines. The wheels were also looking at little shabby and we painted them the wrong color last time, since the car was going to be on the lift for a while we repainted them as well.

Untitled by Nick Wood, on Flickr

Untitled by Nick Wood, on Flickr

I think we will get a set of 16" alpina reps before too long but these will work for now.

Untitled by Nick Wood, on Flickr

Chihuahua · 08-21-2023, 04:03 PM

I'd kill for that garage setup. What part of GA are you in?

John in VA · 08-21-2023, 07:41 PM

Quote:

Originally Posted by MPOWER5266

The wheels were also looking at little shabby and we painted them the wrong color last time, since the car was going to be on the lift for a while we repainted them as well.

What did you use for silver paint?

IcewaterPete · 08-21-2023, 10:50 PM

Looking good!

MPOWER5266 · 08-22-2023, 10:27 AM

Quote:

Originally Posted by Chihuahua

I'd kill for that garage setup. What part of GA are you in?

Newnan

Quote:

Originally Posted by John in VA

What did you use for silver paint?

Wurth silver. These are going to get replaced anyway so we just rattle canned them for now.

Quote:

Originally Posted by IcewaterPete

Looking good!

Thank you.

MPOWER5266 · 09-26-2023, 09:27 AM

We have been chasing a sputter/fuel starvation issue all summer. When the car gets hot, it develops a poor running condition and has stalled a couple times. We checked the air fuel ratio and it was lean, so the first step was fatten it up.

Untitled by Nick Wood, on Flickr

That helped but the condition would still pop up occasionally. I found a post on an Opel Gt forum were someone was having the same issue and cured it by heat wrapping some of the fuel lines under the hood. His thought was that the heat was causing a vapor lock issue... worth a shot. We also swapped in a smaller fuel filter, this is a filter we added not an oem filter.

Untitled by Nick Wood, on Flickr

While it was down we also repaired and replaced the trunk trim. Its looking much nicer now.

Untitled by Nick Wood, on Flickr

Untitled by Nick Wood, on Flickr

I drove it to work today and no issues so far.... Fingers crossed.

Untitled by Nick Wood, on Flickr

darkcircles · 10-09-2024, 03:56 PM

Hi,

Thank you for sharing your restoration journey with your e9. Would you be able to share some of your experience with me in regards to the e9? I just picked up my e9 today and took it out for a good hr long ride. As I was backing into my garage, there’s a little bump entering my garage, and I believe the car stalled halfway in. I accidentally stalled the car twice before the hr drive, and the engine restarted fine. However as it was halfway in the driveway and stalled, the engine wasn’t able to restart. Would you be able to give any advice on where to look into? Thank you.

ActusReus · 11-09-2024, 08:31 AM

Loving this detailed restoration!

05-23-2022, 11:46 AM	#288
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	This weekend was the annual trip to The Vintage. We didnt have too terribly much prep except for new brake pads on the front and an adjustment on the rear. I did give it a quick bath Thursday before heading out Friday morning. Untitled by Nick Wood, on Flickr All set. Untitled by Nick Wood, on Flickr I usually take one of my buckets full of cleaning supplies so I can clean the car up before the show, but a normal bucket wouldn't fit in the trunk. I stopped by the local detail garage and grabbed this shorter bucket and some smaller spray bottles. Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr Perfect fit. Untitled by Nick Wood, on Flickr The weekend was a blur, so much so that I didn't snap any pics. Friday we went to Greer to the CCA museum, then to the hotel in Asheville. Had dinner with some friends Friday night, and drank too much beer in the hotel parking lot. Saturday met up with some friends Saturday morning and after coffee, took back roads up to the show. We had a little rain heading back to the hotel after the vintage, but not too bad and ended the evening with more parking lot beers. We had a few little issues with the car. There is a stumble/hesitation that intermittently shows up for a short time if the car heat soaks. We swapped the coil and it was great for the rest of the weekend until about 2 miles from home. The ac could use a recharge and it has a little pull to the left under heavyish braking. All and all I am pretty happen with how it performed. We have some mods and maintenance planned soon, but we might wait until the winter and do it all at once. For now it just needs a good cleaning. Untitled by Nick Wood, on Flickr
	Appreciate 11 happyjack1758.50 wdb5074.50 flybigjet7717.00 tracer bullet3750.00 P111734.00 overcoil3121.00 IcewaterPete2755.00 Car-Addicted8235.50 Mani5915898.50 David701755.00 tcphoto4167.50 Quote

04-17-2023, 08:49 AM	#290
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	I cant believe its almost been a year since my last post. The car has been perfect, but some small updates.. The drivers seat had a split that has been getting worse so we found a way to kinda "glue" it back together. We glued it and dyed it and it looks pretty good. We have a new seat cover that we will eventually install but I would like to keep the stock leather as long as I can. Untitled by Nick Wood, on Flickr Finally got around to getting this tag registered to the car. Its only like $5-10 to do this in Georgia so I figured why not? Untitled by Nick Wood, on Flickr And Saturday, while I was working, my dad took it to a local show and it won its first award. Untitled by Nick Wood, on Flickr I may have a lead on some wheels for it....
	Appreciate 8 Almuliman560.50 tracer bullet3750.00 lakefront643.00 wdb5074.50 golfer23rm66.00 IcewaterPete2755.00 Mani5915898.50 tcphoto4167.50 Quote

06-06-2023, 01:36 PM	#291
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Small update on the e9. Project cars are really never done.... The door cards are made of a compressed cardboard, and the drivers door was no longer holding the clips that attach it to the door. We found a company that was making new door cards out of wood. So we pulled the cards, pealed the pretty part off and glued it onto the wood panel. Untitled by Nick Wood, on Flickr While it was apart, we replaced the vent and main window seals. Untitled by Nick Wood, on Flickr And re-assembled. Untitled by Nick Wood, on Flickr Its looking a ton better and should last for years. Untitled by Nick Wood, on Flickr
	Appreciate 6 happyjack1758.50 flybigjet7717.00 wdb5074.50 golfer23rm66.00 IcewaterPete2755.00 Mani5915898.50 Quote

08-21-2023, 12:14 PM	#292
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	Just a few small updates. The E9 has been on the lift for the better part of a month or so. We finally put a set of rear bumper under riders on. We are also fixing/replacing all of the trunk trim. Untitled by Nick Wood, on Flickr While it was up waiting on parts, we replaced the rear brake cylinders and lines. The wheels were also looking at little shabby and we painted them the wrong color last time, since the car was going to be on the lift for a while we repainted them as well. Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr I think we will get a set of 16" alpina reps before too long but these will work for now. Untitled by Nick Wood, on Flickr
	Appreciate 2 IcewaterPete2755.00 Mani5915898.50 Quote

08-21-2023, 04:03 PM	#293
Chihuahua Brigadier General 4473 Rep 3,365 Posts Drives: E30 329iS, E65 Alpina B7 Join Date: May 2012 Location: TBD iTrader: (0)	I'd kill for that garage setup. What part of GA are you in?
	Appreciate 0 Quote

08-21-2023, 10:50 PM	#295
IcewaterPete Lieutenant Colonel 2755 Rep 1,800 Posts Drives: 2020 F33 M Sport, 2021 M2C 6MT Join Date: Sep 2020 Location: Illinois iTrader: (0)	Looking good!
	Appreciate 0 Quote

09-26-2023, 09:27 AM	#297
MPOWER5266 Major 4778 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	We have been chasing a sputter/fuel starvation issue all summer. When the car gets hot, it develops a poor running condition and has stalled a couple times. We checked the air fuel ratio and it was lean, so the first step was fatten it up. Untitled by Nick Wood, on Flickr That helped but the condition would still pop up occasionally. I found a post on an Opel Gt forum were someone was having the same issue and cured it by heat wrapping some of the fuel lines under the hood. His thought was that the heat was causing a vapor lock issue... worth a shot. We also swapped in a smaller fuel filter, this is a filter we added not an oem filter. Untitled by Nick Wood, on Flickr While it was down we also repaired and replaced the trunk trim. Its looking much nicer now. Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr Untitled by Nick Wood, on Flickr I drove it to work today and no issues so far.... Fingers crossed. Untitled by Nick Wood, on Flickr
	Appreciate 7 tracer bullet3750.00 wdb5074.50 Davil6909.50 ppointer861.00 Mani5915898.50 M-technik-32463.00 tcphoto4167.50 Quote

10-09-2024, 03:56 PM	#298
darkcircles Registered 0 Rep 1 Posts Drives: bmw 1971 e9 2800cs Join Date: Oct 2024 Location: new york iTrader: (0)	First Drive in my 1971 e9 2800cs Hi, Thank you for sharing your restoration journey with your e9. Would you be able to share some of your experience with me in regards to the e9? I just picked up my e9 today and took it out for a good hr long ride. As I was backing into my garage, there’s a little bump entering my garage, and I believe the car stalled halfway in. I accidentally stalled the car twice before the hr drive, and the engine restarted fine. However as it was halfway in the driveway and stalled, the engine wasn’t able to restart. Would you be able to give any advice on where to look into? Thank you.
	Appreciate 0 Quote

11-09-2024, 08:31 AM	#299
ActusReus New Member 2 Rep 10 Posts Drives: 440i Join Date: Nov 2024 Location: UK iTrader: (0)	Loving this detailed restoration!
	Appreciate 0 Quote