[Zaskar]

Only the best for her.

[M_Power Rob]

Originally Posted by Zaskar

Only the best for her.

What is that equivalent to in US octane?

[jessejericho]

Originally Posted by M_Power Rob

What is that equivalent to in US octane?

95

https://en.wikipedia.org/wiki/Octane_rating#Examples

[M_Power Rob]

Originally Posted by jessejericho

95

https://en.wikipedia.org/wiki/Octane_rating#Examples

I wasn't sure what "your" 102 fell under.

[BroDoze]

Pshhh, I cannot even get anything over 91oct here.

[NewToM]

Originally Posted by BroDoze

Pshhh, I cannot even get anything over 91oct here.

Same. Our poor babies.

[M_Power Rob]

Originally Posted by BroDoze

Pshhh, I cannot even get anything over 91oct here.

No out of the way remote stations that carry 93?

[jessejericho]

Originally Posted by G87DRVR

Please post some soundclips! Resonated or none resonated midpipe?

https://www.youtube.com/watch?v=n5OzXIAJnZ8

Can't seem to figure out how to embed a YouTube video in a post.

Non resonated! Just had the IRL single midpipe installed today, sounds incredible. Perfect pairing with the SST valve controller - in OEM mode, it sounds just as quiet as stock as far as I'm concerned. With the valves open in Sport+, it has an amazing growl, great burbles, no rasp or big bangs. Exactly what I was hoping for.

The first part of the video is showing the valve controller before the midpipe was installed. Cold start, with valves at OEM and then fully open, then revving in OEM mode, then valves open M1, then valves open in M2 Sport+ (or something like that, should have written down what I was doing).

The second part (at 1:15) is after midpipe install. Cold start in OEM valve mode, then fully open in M1, and then open in M2 Sport+. Hard to capture, but just after the video ended my wife opened the door to the garage with a pretty funny look on her face. She's happy that I'm happy... lol

[J-RO]

Originally Posted by Teamboost

Added the Alpha N wing today in body color

I dont really care for spoilers of this type but I do like the fact that you painted it to match the body.

[AdnanH35]

Originally Posted by Teamboost

Added the Alpha N wing today in body color

share more pics! I’ve been waiting to see a Toronto red with a color matched wing 😂

[AZG87]

Originally Posted by BroDoze

Pshhh, I cannot even get anything over 91oct here.

Same here. And it's crap 91 in AZ. Exactly why last car was flex tune to run 91/ e54-85 lol.

[ronin13013]

springs and alignment

[UPSIT]

Originally Posted by MineralGreyMetallic

Over the last week

- Edelweiss Wheels 21"/20" LT3 in Champagne
- - 9.5 kg | 10.5x20 ET14 for 285/30 R20
- - 10.3 kg | 11x21 ET12 for 305/25 R21
- Alpha-N Front Grille
- MHC Front Ducts
- MHC Front Splitter
- MHC Side Skirts
- MHC Rear Diffuser Set
- MHC V Style Rear Spoiler

Ever since I put on the wheels the car has been getting like 10x the attention. Not sure I'm happy about that, but I do love them.

The MHC stuff is expensive, but the fitment is bang on.

Does the front setup with 20x10.5 on 285/30 R20 tires rub the insider liner? The wheels look great……Thanks

[MineralGreyMetallic]

Originally Posted by UPSIT

Does the front setup with 20x10.5 on 285/30 R20 tires rub the insider liner? The wheels look great……Thanks

No rubbing that I've noticed.

[M_Power Rob]

Originally Posted by UPSIT

Does the front setup with 20x10.5 on 285/30 R20 tires rub the insider liner? The wheels look great……Thanks

Speaking from my car...20x9.5 with 275/30/20 up front rubbed when steering wheel was at maximum in either direction. I am lowered on MP HAS.

[G87DRVR]

Originally Posted by jessejericho

https://www.youtube.com/watch?v=n5OzXIAJnZ8

Can't seem to figure out how to embed a YouTube video in a post.

Non resonated! Just had the IRL single midpipe installed today, sounds incredible. Perfect pairing with the SST valve controller - in OEM mode, it sounds just as quiet as stock as far as I'm concerned. With the valves open in Sport+, it has an amazing growl, great burbles, no rasp or big bangs. Exactly what I was hoping for.

The first part of the video is showing the valve controller before the midpipe was installed. Cold start, with valves at OEM and then fully open, then revving in OEM mode, then valves open M1, then valves open in M2 Sport+ (or something like that, should have written down what I was doing).

The second part (at 1:15) is after midpipe install. Cold start in OEM valve mode, then fully open in M1, and then open in M2 Sport+. Hard to capture, but just after the video ended my wife opened the door to the garage with a pretty funny look on her face. She's happy that I'm happy... lol

Woow huge difference!! Thanks for posting!

[jessejericho]

Originally Posted by G87DRVR

Woow huge difference!! Thanks for posting!

For sure! I'm going to do some video of the car driving, just need a willing videographer. It sounds absolutely incredible out on the road.

[mrdudley]

Goodbye resonators. Hello AA Single Midpipe thanks to mike

In comfort just sounds a bit deeper and a bit louder. In sport it sounds amazing. Throttle response feels better but probably placebo effect.

Now to figure out where to store this thing.

[ScottyRyan2019]

My new wheels have finally arrived. I went with a little something different style wise.

BSPK Forged in Brushed Double Gunmetal

20 x 11 ET 13 with 295/30/20
19 x 10 ET 11 with 275/35/19

The finish and craftsmanship are top notch. I will try to weigh them but I'm told around 23 lbs for the 20s and 21lbs for the 19s.

I should have them mounted end of this week once I finish ceramic coating them.

[it.g.ma_g87]

Boom boom

[wtb1313]

Originally Posted by yoon_209

Boom boom

Install looks clean…exactly as it should. m2 on order and hidden sub is on my to do list.
Do you have a part list and any notes or takeaways to share? Link to existing guide thread if it exists will suffice. 🙏

[it.g.ma_g87]

Originally Posted by wtb1313

Install looks clean…exactly as it should. m2 on order and hidden sub is on my to do list.
Do you have a part list and any notes or takeaways to share? Link to existing guide thread if it exists will suffice. 🙏

I forgot to post the best part. Added the bass knob into the center console

Tecnic pnp add a sub and amp harness
Visual ice - g87 stealth sub, vendor on ebay
Jl audio 10w3v3
Kenwood x802x5- running 500 rms

I’m on my phone right so I can’t find links and go to in depth. Fundamentally adding the sub with this harness and adding an amplifier is the same across all chassis: E F and G. Any of the existing DIY on the forums is pretty much the same for this car. Get the technic pnp unless you are really skilled and know how to splice and use a LOC.

DM if you want more info