[LAGWAGN]

Originally Posted by paulsukhu

I was surprised how quiet my 2024 M2 was compared to my 2019 Mustang Bullitt. I did a few things to greatly improve the M2’s sound while retaining the ability to keep it almost as quiet as stock when needed.

1) Stop the fake interior exhaust sound - This was very annoying, especially with a manual. I disabled ASD using an OBDLink device and the BimmerCode app.

OBDLink CX- https://www.obdlink.com/products/obdlink-cx/

BimmerCode app- https://bimmercode.app/

2) Take control of the exhaust valves – My Mustang has a “track mode” exhaust setting that opens the valves and a quiet mode to fully close the valve. The M2 controls the exhaust valves automatically based on drive modes. However, it never fully opens the valves. I went with the DÄHLer valve controller because it didn't need a separate power supply. It has two modes, fully open or stock. It also allows specifying the default mode to control the loudness of cold starts. I can now clearly hear the difference between Efficient, Sport and Sport Plus when the valves are open.

DÄHLer https://www.daehler-tuning.com/product/dahler-valve-controller-bmw/

3) Resonator delete – The final step was to install a Valvetronic Equal length midpipe. The M2 now sounds like I expected it to sound from the factory! Sport Plus with the valves open sounds as raw as my Mustang. The M2 is almost as quiet as stock in Efficient mode with the valve controller is in stock mode.

Vavletronic equal length midpipe- [...]

Completely agree. However, I went with a resonated Single Mid and couldn’t be happier.

Appreciate the heads up on a good local exhaust shop too!

[G87DRVR]

Originally Posted by paulsukhu

I was surprised how quiet my 2024 M2 was compared to my 2019 Mustang Bullitt. I did a few things to greatly improve the M2’s sound while retaining the ability to keep it almost as quiet as stock when needed.

1) Stop the fake interior exhaust sound - This was very annoying, especially with a manual. I disabled ASD using an OBDLink device and the BimmerCode app.

OBDLink CX- https://www.obdlink.com/products/obdlink-cx/

BimmerCode app- https://bimmercode.app/

2) Take control of the exhaust valves – My Mustang has a “track mode” exhaust setting that opens the valves and a quiet mode to fully close the valve. The M2 controls the exhaust valves automatically based on drive modes. However, it never fully opens the valves. I went with the DÄHLer valve controller because it didn't need a separate power supply. It has two modes, fully open or stock. It also allows specifying the default mode to control the loudness of cold starts. I can now clearly hear the difference between Efficient, Sport and Sport Plus when the valves are open.

DÄHLer https://www.daehler-tuning.com/product/dahler-valve-controller-bmw/

3) Resonator delete – The final step was to install a Valvetronic Equal length midpipe. The M2 now sounds like I expected it to sound from the factory! Sport Plus with the valves open sounds as raw as my Mustang. The M2 is almost as quiet as stock in Efficient mode with the valve controller is in stock mode.

Vavletronic equal length midpipe- [...]

Exactely all the things I did with my car 😀

[AZG87]

Originally Posted by paulsukhu

I was surprised how quiet my 2024 M2 was compared to my 2019 Mustang Bullitt. I did a few things to greatly improve the M2’s sound while retaining the ability to keep it almost as quiet as stock when needed.

1) Stop the fake interior exhaust sound - This was very annoying, especially with a manual. I disabled ASD using an OBDLink device and the BimmerCode app.

OBDLink CX- https://www.obdlink.com/products/obdlink-cx/

BimmerCode app- https://bimmercode.app/

2) Take control of the exhaust valves – My Mustang has a “track mode” exhaust setting that opens the valves and a quiet mode to fully close the valve. The M2 controls the exhaust valves automatically based on drive modes. However, it never fully opens the valves. I went with the DÄHLer valve controller because it didn't need a separate power supply. It has two modes, fully open or stock. It also allows specifying the default mode to control the loudness of cold starts. I can now clearly hear the difference between Efficient, Sport and Sport Plus when the valves are open.

DÄHLer https://www.daehler-tuning.com/product/dahler-valve-controller-bmw/

3) Resonator delete – The final step was to install a Valvetronic Equal length midpipe. The M2 now sounds like I expected it to sound from the factory! Sport Plus with the valves open sounds as raw as my Mustang. The M2 is almost as quiet as stock in Efficient mode with the valve controller is in stock mode.

Vavletronic equal length midpipe- [...]

Coming from an 18 Mustang with long tubes and full exhaust I completely understand. Went with the AA EL mid on my g87 to help wake her up some.

[wife-dog-bmw]

Originally Posted by BroDoze

Looks great!

Put some spacers and a splitter on that thang!

I am getting there. Only a week in and I want to get the height right first.

[GregW / Oregon]

Originally Posted by paulsukhu

I was surprised how quiet my 2024 M2 was compared to my 2019 Mustang Bullitt. I did a few things to greatly improve the M2’s sound while retaining the ability to keep it almost as quiet as stock when needed.

1) Stop the fake interior exhaust sound - This was very annoying, especially with a manual. I disabled ASD using an OBDLink device and the BimmerCode app.

OBDLink CX- https://www.obdlink.com/products/obdlink-cx/

BimmerCode app- https://bimmercode.app/

2) Take control of the exhaust valves – My Mustang has a “track mode” exhaust setting that opens the valves and a quiet mode to fully close the valve. The M2 controls the exhaust valves automatically based on drive modes. However, it never fully opens the valves. I went with the DÄHLer valve controller because it didn't need a separate power supply. It has two modes, fully open or stock. It also allows specifying the default mode to control the loudness of cold starts. I can now clearly hear the difference between Efficient, Sport and Sport Plus when the valves are open.

DÄHLer https://www.daehler-tuning.com/produ...ontroller-bmw/

3) Resonator delete – The final step was to install a Valvetronic Equal length midpipe. The M2 now sounds like I expected it to sound from the factory! Sport Plus with the valves open sounds as raw as my Mustang. The M2 is almost as quiet as stock in Efficient mode with the valve controller is in stock mode.

Vavletronic equal length midpipe- https://valvetronic.com/products/bmw...40638401347620

Installer- Miller Muffler in Lewisville, TX did an excellent job installing the midpipe- https://maps.app.goo.gl/tw8sRp6Q5TPijbaZA

Do you get crackles and pops on trailing thottle? I don’t care for that on a DD.

[curtdragon]

Why isn't there a setting that can be changed via bimmercode or something to allow for the valves to open more?

[BroDoze]

Originally Posted by GregW / Oregon

Do you get crackles and pops on trailing thottle? I don’t care for that on a DD.

Your center console button disables all that.

[wife-dog-bmw]

Slowly making improvements......one week in the ceramic coating is done and the windows are tinted......unfortunately the skid plate is still in the family room....spacers are in the mail.....waiting on better weather.

[RMB]

Originally Posted by wife-dog-bmw

Slowly making improvements......one week in the ceramic coating is done and the windows are tinted......unfortunately the skid plate is still in the family room....spacers are in the mail.....waiting on better weather.

What skid plate did you go with?

[yoon_209]

Not what I did, but a fantastic senior (not that AGE matters) swiped my car and ran, destroyed my skirt and curb rashed my 3 piece LMs. Thanks to the many cameras in the neighborhood I found the video and the person.

[curtdragon]

Originally Posted by yoon_209

Not what I did, but a fantastic senior (not that AGE matters) swiped my car and ran, destroyed my skirt and curb rashed my 3 piece LMs. Thanks to the many cameras in the neighborhood I found the video and the person.

Did you exact your revenge?

[Saigonheat84]

Originally Posted by yoon_209

Not what I did, but a fantastic senior (not that AGE matters) swiped my car and ran, destroyed my skirt and curb rashed my 3 piece LMs. Thanks to the many cameras in the neighborhood I found the video and the person.

Every day is a challenge man. People out there are crazy and stupid.

[wife-dog-bmw]

Originally Posted by RMB

What skid plate did you go with?

MAD. It looks nice and solid. The install looks simple. I don't have a lift so it is up on ramps for me.

[Geighty7]

Going in for BM3 Flex Fuel kit tomorrow, but latest add was license plate that came in.

Also to add- anyone know if negative longer effects ethanol on OEM fuel system or lines? Currently stage 2 OTS multimap planning to run no more than e30/40 to stay on the safe side but maximize power.

[J-RO]

Originally Posted by Geighty7

Going in for BM3 Flex Fuel kit tomorrow, but latest add was license plate that came in.

Also to add- anyone know if negative longer effects ethanol on OEM fuel system or lines? Currently stage 2 OTS multimap planning to run no more than e30/40 to stay on the safe side but maximize power.

I hope you dont have a problem getting it up.

[curtdragon]

Originally Posted by J-RO

I hope you dont have a problem getting it up.

Weird. I've heard of starting issues with e but I've never had any and ran flexfuel on another chassis with dual port injectors. I ran that car through winter but it was garaged.

[Geighty7]

Originally Posted by curtdragon

Weird. I've heard of starting issues with e but I've never had any and ran flexfuel on another chassis with dual port injectors. I ran that car through winter but it was garaged.

I think he was referring to my license plate lol

[curtdragon]

Originally Posted by Geighty7

I think he was referring to my license plate lol

😆😆 I didn't even see that haha

[M2 CCO]

Purchased the xHP transmission tuning software! Just waiting for the correct dongle before I try out some of their OTS maps etc… Should be fun!

[what_ever]

Installed 12mm spacers front and rear, and the winter wheels with 826Ms 19/20 with Hankook Winter Evo icept 3 275/35 R19 100V / 285/30 R20 99W .

[DSTR]

Enjoyed the day driving to south of Stuttgart to have the M2 and the M240 winter service/winter wheels completed.

Winter Wheels / Engine oil and alignment for the M2. Feels nice but will miss the superb summer tires and bi-color wheels. Inspection for both was super! No issues.

Hopefully its a mild winter when we are here.

[curtdragon]

Originally Posted by DSTR

Enjoyed the day driving to south of Stuttgart to have the M2 and the M240 winter service/winter wheels completed.

Winter Wheels / Engine oil and alignment for the M2. Feels nice but will miss the superb summer tires and bi-color wheels. Inspection for both was super! No issues.

Hopefully its a mild winter when we are here.

Curious about the alignment. Did you need it or was it something they checked?