[J-RO]

Interesting that their name begins with IND...........

[///M TOWN]

Originally Posted by J-RO

Interesting that their name begins with IND...........

It’s clearly short for “Individual”

Bless iND’s little heart ❕

[NovaChris]

Just ordered from IND!

[@indiv.official]

Originally Posted by NovaChris

Just ordered from IND!

Thank you sooo much. you will love it. perfect fitting, excellent quality !!!

[///M TOWN]

Originally Posted by @indiv.official

Thank you sooo much. you will love it. perfect fitting, excellent quality !!!

There’s something about the simplicity of the design that really makes it a no-brainer

[M2 SoCal]

Got a video link showing install etc?

[@indiv.official]

Originally Posted by Autobahn SoCal

Got a video link showing install etc?

this is too easy .. dont need installation.

Degrease the surface and remove the double-sided tape already attached to the product little by little from each corner. Put the product into the inlet After seating it, remove all double-sided tape and it will be installed perfectly.

[M2 SoCal]

Originally Posted by @indiv.official

this is too easy .. dont need installation.

Degrease the surface and remove the double-sided tape already attached to the product little by little from each corner. Put the product into the inlet After seating it, remove all double-sided tape and it will be installed perfectly.

These are sold in a set for left and right inlet I assume and not individually? Your product website doesn’t specify they are sold in a set.

[@indiv.official]

Originally Posted by Autobahn SoCal

These are sold in a set for left and right inlet I assume and not individually? Your product website doesn’t specify they are sold in a set.

This is sold as a set only. If the product is damaged and only one side needs to be replaced, it can be sold individually.

However, it is basically sold as a left and right set.

[///M TOWN]

Originally Posted by @indiv.official

This is sold as a set only. If the product is damaged and only one side needs to be replaced, it can be sold individually.

However, it is basically sold as a left and right set.

That’s a smart way of doing it

[sacowich]

Too late for me. Already went through all the bumper removal.
Great idea nonetheless to be able to just stick it on from the front. Easiest option out there and a no-brainer.
Good luck with the product. Should do well.

[Celestion]

This is more visually appealing than the OEM solution to me because the slats remain horizontal. This car is all about boxiness… a modern day German r34 Skyline… and the angled slats of the OEM inserts don’t jive with that visually…

[M2 SoCal]

Originally Posted by @indiv.official

this is too easy .. dont need installation.

Degrease the surface and remove the double-sided tape already attached to the product little by little from each corner. Put the product into the inlet After seating it, remove all double-sided tape and it will be installed perfectly.

Can you please post a picture of the back? I’m sure people would like to see the backside of the product with the tape applied. Once I see this, I’ll order a pair.

[@indiv.official]

Originally Posted by Autobahn SoCal

Can you please post a picture of the back? I’m sure people would like to see the backside of the product with the tape applied. Once I see this, I’ll order a pair.

The structure is the same as MPP. Our product adheres more closely to the bumper inlet. I will add a photo of the back tomorrow. A little bit of the back in the attached photo. can see.

[M2 SoCal]

Originally Posted by @indiv.official

The structure is the same as MPP. Our product adheres more closely to the bumper inlet. I will add a photo of the back tomorrow. A little bit of the back in the attached photo. can see.

I’m talking about the whole backside of the product showing the inside with the tape applied. This is just another photo of the forward facing outside. We will wait for that photo thanks again.

[Ronin76]

Originally Posted by ///M TOWN

There’s something about the simplicity of the design that really makes it a no-brainer

I was contemplating getting the M Performance inlets but seeing this I may have to think twice and save some money.

edit:

From a cost perspective the M Performance version is roughly $280 more ($1,080) so it is a tougher choice than I originally thought.

[NovaChris]

They arrive tomorrow!

Will update with pics etc

[@indiv.official]

Originally Posted by NovaChris

They arrive tomorrow!

Will update with pics etc

oh... you will recieve very first one that without our box !!!

[NovaChris]

Just got them!

So quality feels a lot better then the AutoTecknic versions. Can’t wait to install tonight or this weekend.

[kev12]

Is it just me, or is there a gap along the top edge?

[NovaChris]

Originally Posted by kev12

Is it just me, or is there a gap along the top edge?

That was just test fitting it.

[kev12]

Originally Posted by NovaChris

That was just test fitting it.

Ah ok, sorry mate, my bad.