[JABCAT]

Originally Posted by ayilar

JABCAT -- 5 months into your ownership of the oil cooler screen, has it been put to use (any evidence that it was hit and protected properly)? Is it still tightly in its mounts, and do you have any noises or vibrations?

I make it a practice to avoid running over objects in the roadway but I'd be happy to take a look under there. I just crossed 7,100 mi last night, and no issues as far as it coming loose or noises/vibrations.

[ayilar]

Originally Posted by JABCAT

I make it a practice to avoid running over objects in the roadway but I'd be happy to take a look under there. I just crossed 7,100 mi last night, and no issues as far as it coming loose or noises/vibrations.

Thank you in advance. One thing I was also wondering, is whether you considered adding high-heat rubber or silicone washers to lessen the potential for rattles/noises?

[JABCAT]

Originally Posted by ayilar

Thank you in advance. One thing I was also wondering, is whether you considered adding high-heat rubber or silicone washers to lessen the potential for rattles/noises?

Looks just like the day I installed it (although a little dirty as I drove through rain recently). Didn't need any washers and don't see any reason to worry about rattles or noises.

[aerobod]

Besides mounting the screen with the frame towards the oil cooler to increse the mesh distance by a few mm to give more cushioning from large debris and using #8 screws instead of the supplied #6 ones, I also added a couple of zip ties around the cooler support clips to the screen, decreasing any possibility of vibration of the screen over it's span substantially.

[ayilar]

Originally Posted by aerobod

Besides mounting the screen with the frame towards the oil cooler to increase the mesh distance by a few mm to give more cushioning from large debris and using #8 screws instead of the supplied #6 ones, I also added a couple of zip ties around the cooler support clips to the screen, decreasing any possibility of vibration of the screen over it's span substantially.

Thank you, this is the type of experience/information that I was looking for. If I understand correctly, you simply flipped the screen, and the mounting points remain the exact same?

PS: would love to see further-out photos of the whole setup, to compare with @JABCAT 's photo

[aerobod]

Originally Posted by ayilar

Thank you, this is the type of experience/information that I was looking for. If I understand correctly, you simply flipped the screen, and the mounting points remain the exact same?

PS: would love to see further-out photos of the whole setup, to compare with @JABCAT 's photo

Correct. Here is the full view (I did push the end of the rubber dam back on fully after taking the photo):

[ayilar]

Originally Posted by aerobod

Correct. Here is the full view (I did push the end of the rubber dam back on fully after taking the photo):

Thank you, for the pic and for the explanation!

[Ronin76]

Originally Posted by aerobod

Besides mounting the screen with the frame towards the oil cooler to increse the mesh distance by a few mm to give more cushioning from large debris and using #8 screws instead of the supplied #6 ones, I also added a couple of zip ties around the cooler support clips to the screen, decreasing any possibility of vibration of the screen over it's span substantially.

if you do not mind me asking what length screws did you use?

[aerobod]

Originally Posted by Ronin76

if you do not mind me asking what length screws did you use?

Around 2mm longer than the Zunsport supplied ones, some I had in my spare nuts, bolts and screws box, so I didn’t buy any specific ones.

[xtougher]

Originally Posted by aerobod

Besides mounting the screen with the frame towards the oil cooler to increse the mesh distance by a few mm to give more cushioning from large debris and using #8 screws instead of the supplied #6 ones, I also added a couple of zip ties around the cooler support clips to the screen, decreasing any possibility of vibration of the screen over it's span substantially.

As soon as I installed mine, I could tell that there was a possibility of some rattling.

After driving with it on for a bit, I definitely heard it rattle a bit occasionally.

I'll have to do something like this to help get rid of that.

[smuttana]

Made a video installing the Zunsport Oil Cooler Guard on my G80 M3, should be a similar process as well here.

Promo Code: BMW15 for 15% off!

[aerobod]

Originally Posted by xtougher

As soon as I installed mine, I could tell that there was a possibility of some rattling.

After driving with it on for a bit, I definitely heard it rattle a bit occasionally.

I'll have to do something like this to help get rid of that.

I haven’t had any rattling, the zip ties significantly reduce any flexing of the screen between the mounting screws.

[CarsRFun!]

Not sure IF this has been written about anywhere, but, Zunsport just sent me the addition of screen products....and that is the screen for the back side of the cooler. BimmerWorld has them and he said selling fast.
Ordered mine today. That makes a total of 8 screens for the M2. Whew...I guess I got them all now.

Little more involved for the installation, but, not beyond most who have some mech. abilities.

[JABCAT]

Originally Posted by CarsRFun!

Not sure IF this has been written about anywhere, but, Zunsport just sent me the addition of screen products....and that is the screen for the back side of the cooler. BimmerWorld has them and he said selling fast.
Ordered mine today. That makes a total of 8 screens for the M2. Whew...I guess I got them all now.

Little more involved for the installation, but, not beyond most who have some mech. abilities.

There's 6 screens for the M2 shown on their website, where do the other 2 go?

*edit - found the inner fender liner screens listed after the X3M oil cooler screen (which I'm happy they decided to make after I contacted them about it many months ago).

[CarsRFun!]

Originally Posted by JABCAT

There's 6 screens for the M2 shown on their website, where do the other 2 go?

*edit - found the inner fender liner screens listed after the X3M oil cooler screen (which I'm happy they decided to make after I contacted them about it many months ago).

Yep, I've got the 6 installed and found these (2) for inner fender liner
area. I think that is all....LOL!!

[apeas2]

I just installed my Zunsport oil cooler screen. I could not believe that it came from Europe to me in MD 4 days after I ordered it. Took me 1 minute to install it. Its a great quality product without breaking the bank!

[mdrobc13]

Originally Posted by aerobod

Around 2mm longer than the Zunsport supplied ones, some I had in my spare nuts, bolts and screws box, so I didn’t buy any specific ones.

Did the same and used #8 screws but 3/4” depth to ensure it was secure. Looks good and added zip ties around support plastic and screen for more support and to secure as was loose otherwise. Great idea for extra support.