[M_Power Rob]

Originally Posted by NewToM

What I like about both the TRE and Unit 17 is they go to the end of the trunk. I have seen too many that stop an inch + from the end.

This and the ones that sit back from the edge (where the angled area is) like where the OEM lip thing sits look horrible.

[Blacktemplar]

Originally Posted by M_Power Rob

I really wish I knew whu pictures I take in portrait post sideways.

iPhone? No idea why, mine does the same even if it looks ok on the screen.

Quick fix is to edit the photo by rotating 360 then saving - seems to wipe whatever default settings the iPhone gives it

[M_Power Rob]

Originally Posted by Blacktemplar

iPhone? No idea why, mine does the same even if it looks ok on the screen.

Quick fix is to edit the photo by rotating 360 then saving - seems to wipe whatever default settings the iPhone gives it

Yeah, I am doing from my phone. Will try rotating and see if that helps

[VegasG42]

Originally Posted by M_Power Rob

I really wish I knew whu pictures I take in portrait post sideways.

When you upload pictures from your phone or computer, they will automatically post in whichever orientation is wider than tall (landscape mode , or horizontal).

So when you upload pictures, they need to be wider than taller. You can always easily edit pics to have a border on the sides to increase width

[VegasG42]

Originally Posted by m_power rob

there are plenty of pictures of the tre-01 spoiler but not much of the unit 17 oem ++...

[M_Power Rob]

Originally Posted by VegasG42

When you upload pictures from your phone or computer, they will automatically post in whichever orientation is wider than tall (landscape mode , or horizontal).

So when you upload pictures, they need to be wider than taller. You can always easily edit pics to have a border on the sides to increase width

Thanks, didn't realize that.

[mdrobc13]

Went with Kies CF spoiler offering as $800-1500 was just a bit much for a CF spoiler and didn't need anything super aggressive on the car IMHO. Easy removal OEM part and 3M Eraser wheel removed all residual adhesive with NO issue with paint as pics sho. Almost left it bare afterwards but install of CF replacement was pretty easy to apply/install and good fitment. Happy with result!

[Basketcase]

Originally Posted by ourlee

I’m doing this one

Just called Turner, ZERO eta which pisses me off.

That is the nicest front lip I have seen yet! and its $799!

[jmg]

Originally Posted by ourlee

I’m doing this one

Just called Turner, ZERO eta which pisses me off.

Who makes this wing? Turner, or are they just selling them?

[Geighty7]

Paint matched Suvneer. Fitment could be better, not going to lie.

[ourlee]

Originally Posted by jmg

Who makes this wing? Turner, or are they just selling them?

I’m guessing Turner makes them but don’t know for sure.

[dissident111]

Originally Posted by Ehloo

unit 17 painted. it’s a full length MP style. way too much contrast leaving it carbon fiber

I like painted body color also but have more like csl style spoiler.

[Blacktemplar]

That’s the TRE-01 from AutoID installed, took about an hour all in. Didn’t have any fishing line so used a plastic PPF scraper under the OEM spoiler after I’d heated the glue with a hairdryer - came off pretty easily though I had to work it a bit and ended up with some very light scuffing on the paint - not an issue as it’s completely covered by the new spoiler. Scraped off the thicker glue residue with a trim removal tool, then buffed off the rest with a toffee wheel. A cordless drill on lower rpm’s does the job fine without overheating the clear coat. Cleaned the remainder of the glue with isopropyl alcohol, then polished the entire boot lid with Bilt Hamber cleanser/polisher before a final wipe with alcohol on the areas where the 3M tape makes contact. Spoiler fits perfectly, and IMO is what it should’ve had as standard from the factory.

.

[nicoG87]

Originally Posted by ScottyRyan2019

RW Carbon on the M2. Excellent fit and finish.

Karbel Carbon on the i4. Also excellent fit and finish.

I don't think you can go wrong with any reputable CF distributor.

Btw you can also order the Karbel spoiler without the logo. I recently found out from my local supplier.

[mpfardresher]

Thanks for all the great suggestions and reply’s. Ended up going with the AutoID, easy to install and I love how it looks. 👍

[VegasG42]

Looks great. I plan on ordering the same. Just big enough to be significant , but not too big to look out of place