Garage ideas

UncleWede · 08-20-2018, 11:52 AM

Quote:

Originally Posted by RABAUKE

If I ever want to go in a different direction I can go right over top of it. Just my two cents.

Would you have to do something to "prep" the urethane before trying to get anything else to "stick"?

I've been looking at the floor where I keep my motorcycle in a shed. The material (seems to be almost particle-board like) is starting to bow under the rear tire, and my bike has "marked it's territory" a bit. Since there is a dividing central wall, not sure how to do the entire floor surface on both sides. Wife would be jealous if I didn't improve the floor on her she-shed

Ceramic would be deadly slick with just a bit of oil spilled, no? When we have those Crisco parties in the kitchen, everyone falls down all the time.

jaye944 · 08-20-2018, 12:32 PM

I have a whole section dedicated to my garage rebuild,
still not finished, I went epoxy, did it myself

has the cabinets I assembled and fitted (mastercraft range), tool stuff, foam inserts,

it's part of a playlist

ask any questions you like

https://www.youtube.com/playlist?lis...MkuI18pR4JiHNh

jaye944 · 08-20-2018, 12:44 PM

at the very least avoid mistakes I made

jaye944 · 08-20-2018, 01:03 PM

it depends on what the ure is and what it's going down on,
usually rule of thumb is YES

check out my playlist

standard addage

90% preparation
9% work
10% luck

yes I know that's more than 100%

Quote:

Originally Posted by UncleWede

Would you have to do something to "prep" the urethane before trying to get anything else to "stick"?

jaye944 · 08-20-2018, 01:15 PM

my 2c's though this is more to do with epoxy.

"You pay's your money" is a very good adage, do not skimp out out quality product, I got my epoxy from manufacturer and have NOT looked back.

big box stores "can sometimes be iffy" especially on storage and "old" product lines

also follow to the LETTER the manufacturer specs on

1> cleaning and prep
2> tools
3> temperature, moisture

I spent a shed load, but I know it's done right

Quote:

Originally Posted by bosstones

Wrt flooring, just clean it and seal it. There are some reasonable priced types that you can DIY.

https://allgaragefloors.com/best-sea...your-garage-f/

I've been slowly working on my garage (nothing fancy) since moving in and was going to work lighting next. Due to the joist direction and already having a finished garage, I was going to just go w/ LED strip lights and run the conduit outside the drywall (but paint it to match the ceiling). An easy option if you don't want to deal w/ running conduit (or romex...or BX) and patching up the ceiling.

jaye944 · 08-20-2018, 01:17 PM

My workbench came with this already.

I didnt like the look of a peg board on my garage, I like the look of cabinets,
although I would go for wall mounted kaizen foam that looks the mutts nutts

but to each his own

Quote:

Originally Posted by knowthebattle

I plan to do this on the wall directly in front of the cars.

jaye944 · 08-20-2018, 01:18 PM

I hadn't realized, I started my garage project in 2012 according to you tube

LOL

jaye944 · 08-20-2018, 01:20 PM

start from the top, work to the bottom

Paint roof
paint walls
do the floor
hang cabinets
do lighting

park car earn ya self a beer

Quote:

Originally Posted by knowthebattle

Hello guys and gals. I'm currently working to redo my garage...well further make to my liking.

This is my latest install. Useless but I wanted to have some wheels shown off.

Looking for ideas. Want to change the orange to red. Rosso Corsa red...

1MOREMOD · 08-20-2018, 07:08 PM

^Are your lights on the ground?

bosstones · 08-20-2018, 11:44 PM

Quote:

Originally Posted by jaye944

my 2c's though this is more to do with epoxy.

"You pay's your money" is a very good adage, do not skimp out out quality product, I got my epoxy from manufacturer and have NOT looked back.

big box stores "can sometimes be iffy" especially on storage and "old" product lines

also follow to the LETTER the manufacturer specs on

1> cleaning and prep
2> tools
3> temperature, moisture

I spent a shed load, but I know it's done right

I've debated epoxy for quite some time. I like the look of cement as well so it's a toss up for me. Plus, I plan to put in a deck w/ underneath storage next year so...watching my pennies at the moment.

Can't find the home reno thread so posting what I've been up to here (sorry if this is thread jacking). Still a work in progress and I need to organize more, but finally go the one wall painted and tire storage up. I'm going to paint a horizontal stripe on all the walls about the same level as the wall outlet. I also might put up some more wall track under the tire storage but TBD for now.

cb804 · 08-21-2018, 07:07 AM

I wanted the garage to be an extension of the home's living space...I went with Racedeck flooring as I wanted something simple I could do myself. Too many steps for epoxy that I didn't feel comfortable with.

Stripes are vinyl except for the white that was paint. Used a laser leveler to get them perfectly straight. Signs are mostly reproductions bought on ebay.

RABAUKE · 08-21-2018, 07:15 AM

Quote:

Originally Posted by cb804

I wanted the garage to be an extension of the home's living space...I went with Racedeck flooring as I wanted something simple I could do myself. Too many steps for epoxy that I didn't feel comfortable with.

Stripes are vinyl except for the white that was paint. Used a laser leveler to get them perfectly straight. Signs are mostly reproductions bought on ebay.

Nice job, my friends bust my chops about my lack of a garage. I've always been a car guy but haven't had a garage for about 10 years now. My 993 is in the car port with a very good cover on it but it's not the same. Oh well.

King Rudi · 08-21-2018, 08:09 AM

Quote:

Originally Posted by cb804

I wanted the garage to be an extension of the home's living space...I went with Racedeck flooring as I wanted something simple I could do myself. Too many steps for epoxy that I didn't feel comfortable with.

Stripes are vinyl except for the white that was paint. Used a laser leveler to get them perfectly straight. Signs are mostly reproductions bought on ebay.

Very nice. Well done.

Yapakanichi · 08-21-2018, 08:59 AM

Quote:

Originally Posted by cb804

I wanted the garage to be an extension of the home's living space...I went with Racedeck flooring as I wanted something simple I could do myself. Too many steps for epoxy that I didn't feel comfortable with.

Stripes are vinyl except for the white that was paint. Used a laser leveler to get them perfectly straight. Signs are mostly reproductions bought on ebay.

THIS!!!

I actually really do enjoy seeing everyone's car space. Gives me great ideas.

I'm jealous of the extra space you have around your vehicle.

A standard two car garage is a tight squeeze sometimes

jaye944 · 08-21-2018, 09:20 AM

I have a one car garage

Quote:

Originally Posted by knowthebattle

THIS!!!

I actually really do enjoy seeing everyone's car space. Gives me great ideas.

I'm jealous of the extra space you have around your vehicle.

A standard two car garage is a tight squeeze sometimes

lsturbointeg · 08-27-2018, 12:51 AM

what are you guys recommending for some nice garage cabinets?

Reborn_ · 08-28-2018, 11:23 AM

Quote:

Originally Posted by lsturbointeg

what are you guys recommending for some nice garage cabinets?

I'm in the market as well. So many options, I'm kind of swirling. I don't want to mix and match by doing it over time, which makes it that much harder to pick a set.

WingZeroX5 · 08-28-2018, 01:19 PM

Get a lift, tv, better lighting, uniform cabinets...here's mine

Yapakanichi · 08-29-2018, 12:52 PM

what size lift is that? How tall are your ceilings lol

WingZeroX5 · 08-29-2018, 01:00 PM

Quote:

Originally Posted by knowthebattle

what size lift is that? How tall are your ceilings lol

Atlas BP8000, i got 9ft 3in ceilings

1MOREMOD · 08-31-2018, 09:21 AM

Looks like it takes up 2 spots

Yapakanichi · 08-31-2018, 09:51 AM

Quote:

Originally Posted by 1MOREMOD

Looks like it takes up 2 spots

Didn't even see that...

08-20-2018, 12:32 PM	#24
jaye944 Captain 1027 Rep 638 Posts Drives: a Join Date: Jul 2015 Location: a iTrader: (0)	I have a whole section dedicated to my garage rebuild, still not finished, I went epoxy, did it myself has the cabinets I assembled and fitted (mastercraft range), tool stuff, foam inserts, it's part of a playlist ask any questions you like https://www.youtube.com/playlist?lis...MkuI18pR4JiHNh
	Appreciate 0 Quote

08-20-2018, 12:44 PM	#25
jaye944 Captain 1027 Rep 638 Posts Drives: a Join Date: Jul 2015 Location: a iTrader: (0)	at the very least avoid mistakes I made
	Appreciate 0 Quote

08-20-2018, 01:18 PM	#29
jaye944 Captain 1027 Rep 638 Posts Drives: a Join Date: Jul 2015 Location: a iTrader: (0)	I hadn't realized, I started my garage project in 2012 according to you tube LOL
	Appreciate 0 Quote

08-20-2018, 07:08 PM	#31
1MOREMOD - 11820 Rep 23,186 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	^Are your lights on the ground?
	Appreciate 1 King Rudi13072.00 Quote

08-21-2018, 07:07 AM	#33
cb804 Captain 2413 Rep 944 Posts Drives: 340 xDrive, M2C Join Date: Jul 2014 Location: Chicago iTrader: (0)	I wanted the garage to be an extension of the home's living space...I went with Racedeck flooring as I wanted something simple I could do myself. Too many steps for epoxy that I didn't feel comfortable with. Stripes are vinyl except for the white that was paint. Used a laser leveler to get them perfectly straight. Signs are mostly reproductions bought on ebay. Attached Images
	Appreciate 5 RABAUKE4637.50 King Rudi13072.00 jaye9441027.00 lsturbointeg9200.00 lab_rat396.50 Quote

08-27-2018, 12:51 AM	#38
lsturbointeg Lieutenant General 9200 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	what are you guys recommending for some nice garage cabinets? __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

08-28-2018, 01:19 PM	#40
WingZeroX5 Colonel 781 Rep 2,362 Posts Drives: F80 / F30 Join Date: Mar 2010 Location: New Hampshire iTrader: (14)	Get a lift, tv, better lighting, uniform cabinets...here's mine Attached Images
	Appreciate 2 IllSic_Design2125.00 Lucky John617.00 Quote

08-29-2018, 12:52 PM	#41
Yapakanichi Monkey Marshall 648 Rep 218 Posts Drives: 2005 Z4 3.0i Join Date: Dec 2016 Location: FL iTrader: (0)	what size lift is that? How tall are your ceilings lol
	Appreciate 0 Quote

08-31-2018, 09:21 AM	#43
1MOREMOD - 11820 Rep 23,186 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Looks like it takes up 2 spots
	Appreciate 0 Quote