[MisteClueless]

Originally Posted by roho3323

I stumbled across this site...i sent them an email about G42 M240 fitment waiting for a response. In the meantime, i am going to measure the inlet on our cars and try to figure out the length as well. These tips come in a variety of inlet sizes but the length is 250 mm.

https://bimmerplug.com/products/m-pe...kaAtXCEALw_wcB

Ohhh i want these, bad. If they dont fit i may find someone that can make them fit lol

[Vudumonkey25]

Looks to be an update on the G20 section

Pre fab'ed oval quad tips from aliexpress. They require no mods to the stock system. One set says "customized m340"
https://www.aliexpress.com/item/1005002830305798.html


Here's the original thread
https://g20.bimmerpost.com/forums/sh...1659619&page=1

New development starts on page 5 of that thread here
https://g20.bimmerpost.com/forums/sh...1659619&page=5

So if someone has a friend with an m340i bust out a ruler and confirm outlet size is the same on the m240i

[mblaucoupe135]

Originally Posted by Vudumonkey25

Looks to be an update on the G20 section

Pre fab'ed oval quad tips from aliexpress. They require no mods to the stock system. One set says "customized m340"
https://www.aliexpress.com/item/1005002830305798.html"]https://www.aliexpress.com/item/1005002830305798.html"]https://www.aliexpress.com/item/1005002830305798.html[/URL][/URL]


Here's the original thread
https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=1"]https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=1"]https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=1[/URL][/URL]

New development starts on page 5 of that thread here
https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=5"]https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=5"]https://g20.bimmerpost.com/forums/showthread.php?t=1659619&page=5[/URL][/URL]

So if someone has a friend with an m340i bust out a ruler and confirm outlet size is the same on the m240i

I sure hope these fit our car as I can't stand the stock tips!

[Jack@AUTOID]

We're working on a solution to this....

[Ravenseal]

So, has anyone gotten adventurous yet? Are there any products being made for the M340i that would potentially fit this car? One thing I don't want to do is mess with the sound profile.

[Vudumonkey25]

Originally Posted by Ravenseal

So, has anyone gotten adventurous yet? Are there any products being made for the M340i that would potentially fit this car? One thing I don't want to do is mess with the sound profile.

Most interior parts, intakes, downpipe, strut braces, Floating center caps, 50mm door projectors, door sills, some other things.

My mod list is in my signature

[Ravenseal]

Originally Posted by Vudumonkey25

Most interior parts, intakes, downpipe, strut braces, Floating center caps, 50mm door projectors, door sills, some other things.

My mod list is in my signature

How do you like the DINAN intake? Was it worth the $500?

[Vudumonkey25]

Originally Posted by Ravenseal

How do you like the DINAN intake? Was it worth the $500?

I love the aesthetics of it. Plus it is very similar to stock set up so super easy to install.

Deleted the intake muffler, smooth air flow pipe to the turbo. More turbo spool and bov sound which is an added bonus

[Nicolas05]

Originally Posted by Jack@AUTOID

We're working on a solution to this....

Hi Jack,

Any more news or development on these?

[MPR]

This is going to be one of my first mods, after CF overlays for the interior. Someone please give us some good news

[mwmorph]

I got the M340i exhaust tips from Aliexpress here and they fit. As an aside, for anyone looking for an easier solution, this solution for the G20 M340i does not fit, the trapezoids on the G42 are just slightly bigger in every direction.

Overall, I'm pretty happy with the quality of the welds and installing it with the pins and lock nuts was pretty straightforward. It's not perfect, in that putting a round peg in a square hole kind of thing, but I like it.

[mblaucoupe135]

Originally Posted by mwmorph

I got the M340i exhaust tips from Aliexpress"]Aliexpress"]https://www.aliexpress.com/item/1005002830305798.html"]Aliexpress here and they fit. As an aside, for anyone looking for an easier solution, this"]this"]https://www.aliexpress.com/item/1005001608753471.html?spm=a2g0o.productlist.0.0.60 763876MAqfDg&algo_pvid=ae5ca5f3-7125-4073-a8ae-d04f7c44a1f2&algo_exp_id=ae5ca5f3-7125-4073-a8ae-d04f7c44a1f2-7&pdp_ext_f=%7B%22sku_id%22%3A%2212000016786526222 %22%7D&pdp_pi=-1%3B26.6%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch"]this solution for the G20 M340i does not fit, the trapezoids on the G42 are just slightly bigger in every direction.

Overall, I'm pretty happy with the quality of the welds and installing it with the pins and lock nuts was pretty straightforward. It's not perfect, in that putting a round peg in a square hole kind of thing, but I like it.

Looks good! Which color did you get? How long would you say the install took?

[MPR]

Originally Posted by mwmorph

I got the M340i exhaust tips from Aliexpress here and they fit. As an aside, for anyone looking for an easier solution, this solution for the G20 M340i does not fit, the trapezoids on the G42 are just slightly bigger in every direction.

Overall, I'm pretty happy with the quality of the welds and installing it with the pins and lock nuts was pretty straightforward. It's not perfect, in that putting a round peg in a square hole kind of thing, but I like it.

Thanks for posting this. So the factory exhaust pipes are square that go into these round tip sockets, or did you not mean that literally

[mwmorph]

Originally Posted by mblaucoupe135

Looks good! Which color did you get? How long would you say the install took?

I got the "Black M340i" Version which is black painted stainless with a glossy real CF tip shroud. On the top of the end of the tips, there is a little notch in the CF, and in that notch is the ///M logo engraved in the metal and painted over with the black paint. It's a nice touch, and not very obvious unless you look close at it. For length, that notch is more or less exactly the length that it sticks out beyond the bumper. Install took maybe 20 minutes? The original tips are attached by two T20 (i think T20, didn't pay attention) Torx screws. You can access one directly and the other one by unbolting one bolt on the rear diffuser, or by bending it back a bit. Then you slide them towards the front of the car, downwards and then backwards until it comes off. The majority of the time was setting up the new tips, sliding them on, test fitting the relative position of the tips in the bumper holes and then removing and readjusting again to get both sides lined up, equal and leaving the same gap away from the plastic in each direction.

Originally Posted by MPR

Thanks for posting this. So the factory exhaust pipes are square that go into these round tip sockets, or did you not mean that literally

No, it's a oval socket to bolt onto the oval exhaust pipe, so it works well, its more that the opening in the bumper is a trapezoid and these tips are round, so there is a little incongruity, but overall I still prefer this look over the trapezoid tip.

[MPR]

Originally Posted by mwmorph

No, it's a oval socket to bolt onto the oval exhaust pipe, so it works well, its more that the opening in the bumper is a trapezoid and these tips are round, so there is a little incongruity, but overall I still prefer this look over the trapezoid tip.

Copy, yeah Im good with that, as long as it bolts up snuggly. It looks great on your car. Way better than the factory disconnected bumper tip, or whatever you want to call it.

[mblaucoupe135]

Originally Posted by mwmorph

No, it's a oval socket to bolt onto the oval exhaust pipe, so it works well, its more that the opening in the bumper is a trapezoid and these tips are round, so there is a little incongruity, but overall I still prefer this look over the trapezoid tip.

Thanks for the additional info on these tips! I'm ordering a set today! Does the M logo look legit?

[Ravenseal]

Originally Posted by mwmorph

I got the M340i exhaust tips from Aliexpress here and they fit. As an aside, for anyone looking for an easier solution, this solution for the G20 M340i does not fit, the trapezoids on the G42 are just slightly bigger in every direction.

Overall, I'm pretty happy with the quality of the welds and installing it with the pins and lock nuts was pretty straightforward. It's not perfect, in that putting a round peg in a square hole kind of thing, but I like it.

Did it change the sound at all?

[mwmorph]

Originally Posted by mblaucoupe135

Thanks for the additional info on these tips! I'm ordering a set today! Does the M logo look legit?

I've attached some photos, it looks realistic i think.

Originally Posted by Ravenseal

Did it change the sound at all?

No, it only interfaces with the exhaust after the electric valve, so it at the very, very end.

[mblaucoupe135]

Originally Posted by mwmorph

No, it only interfaces with the exhaust after the electric valve, so it at the very, very end.

Yeah they look pretty good! Just placed my order earlier today. Thanks again!

[MPR]

Did you pick "Black M340i", "Carbon Fiber A M340i", or "Carbon Fiber B M340i"? I can't tell the difference between these

[mwmorph]

Originally Posted by MPR

Did you pick "Black M340i", "Carbon Fiber A M340i", or "Carbon Fiber B M340i"? I can't tell the difference between these

Black M340i

[MPR]

Originally Posted by mwmorph

Black M340i

Thanks.. the issue was viewing it on their app. On a desktop on their full site I was able to see the differences.