[Whytar]

Originally Posted by Scrutineer

That’s a good one. But hang on - $499/year to have that plate? Wow.

Yeah, we get bent over down here for custom plates.
Mind you, an M2 is about $85k US so we are paying overs all the way down the line.

[Whytar]

Just the obligatory armrest modification!

[D4VE]

new Mperformance entrance covers in carbon.

[D4VE]

New Motech MW4 Wheels fitted.
10.5x20 fronts
11x21 rears
Finished in neodyme gold, i believe is a Porsche colour.

[LAGWAGN]

Originally Posted by D4VE

new Mperformance entrance covers in carbon.

I’m going to need to understand what’s up with that seat cover…

[Cefoskey]

Originally Posted by Whytar

Just the obligatory armrest modification!

Ha, so its different on the RHD version, the text is flipped but still on the left side. Didn't expect that.

[BMR.WRLD]

Edited the Pic to make the car lower. I plan to adjust my MP HAS lower this weekend.
BC Forged

19x9.5 +6 HCA381S 275 /35 R19
20x11.0 +12 HCA381S 285/30 R20

[Cefoskey]

Originally Posted by BMR.WRLD

Edited the Pic to make the car lower. I plan to adjust my MP HAS lower this weekend.
BC Forged

19x9.5 +6 HCA381S 275 /35 R19
20x11.0 +12 HCA381S 285/30 R20

I don't think the MP HAS kit will go nearly that low as it maxxes out at 20mm

For reference, I am on 15/12 spacers and H&R springs that lower the front 1.2" / ~30mm and its higher considerably than your photoshop

[BMR.WRLD]

Originally Posted by Cefoskey

I don't think the MP HAS kit will go nearly that low as it maxxes out at 20mm

For reference, I am on 15/12 spacers and H&R springs that lower the front 1.2" / ~30mm and its higher considerably than your photoshop

Attachment 3683098

Absolutely I know it won't go that low, I was in a rush and just settled on a cooler Pic lol. But damn your car is beautiful. R44 lip? And what rear wing on the bumper? Stocks go crazy in that color.

[AZG87]

Originally Posted by BMR.WRLD

Absolutely I know it won't go that low, I was in a rush and just settled on a cooler Pic lol. But damn your car is beautiful. R44 lip? And what rear wing on the bumper? Stocks go crazy in that color.

FYI this is MP HAS at max drop

[BMR.WRLD]

Originally Posted by AZG87

FYI this is MP HAS at max drop

That's awesome, that's what I want. Beautiful car

[Whytar]

Originally Posted by Cefoskey

Ha, so its different on the RHD version, the text is flipped but still on the left side. Didn't expect that.

Yes, there is a LH and RH Drive specific model as they aren't symmetrical. The leading edge of the lid tapers away from the driver (I assume for easier access).

[Cefoskey]

Originally Posted by BMR.WRLD

Absolutely I know it won't go that low, I was in a rush and just settled on a cooler Pic lol. But damn your car is beautiful. R44 lip? And what rear wing on the bumper? Stocks go crazy in that color.

lol thanks. I'm running the cheap Chinese ABS plastic front lip, actually on my 2nd one as with my ride height it scrapes everywhere. Thankfully they are cheap so they are basically sacrificial.

Rear wing is the Kies MP carbon replica, and I have to say its identical to the BMW part.

[BMR.WRLD]

Originally Posted by Cefoskey

lol thanks. I'm running the cheap Chinese ABS plastic front lip, actually on my 2nd one as with my ride height it scrapes everywhere. Thankfully they are cheap so they are basically sacrificial.

Rear wing is the Kies MP carbon replica, and I have to say its identical to the BMW part.

Oh yeah for sure would get trashed lol I'll have to decide if I want to risk it

[Cefoskey]

Originally Posted by AZG87

FYI this is MP HAS at max drop

I am running the same ABS front and rear lips, but had not come across a matching side skirt (without winglets) like it appears you have. Is yours from a different manufacturer, or did you find something from the same set?

[AZG87]

Originally Posted by Cefoskey

I am running the same ABS front and rear lips, but had not come across a matching side skirt (without winglets) like it appears you have. Is yours from a different manufacturer, or did you find something from the same set?

Same manufacturer, different versions. Did this for the exact same reasons of no winglets and needed a more conservative front lip so as not to kill the front clearance (it still ended up being more aggressive up front than planned).
Maxton v4 front lip
Maxton v3 sides and rear.

[Matthewricha]

PPF'd the door jams before they shred the paint off like my old M235i did.

[Viffermike]

During the past few days:

Wed: Got the car back from the detailer covered in Gtechniq Crystal Serum Ultra.

Thur: Confirmed that these Rati Nook trunk organizer blocks work well with the factory carpeting in the trunk; ordered another set.

Yesterday: Installed BMC filters, this Amazon-sourced center console tray mentioned in other theads, and a Duluth Trading Trunk Commander to hold the boot candy.

Next: NW Carbon CF mirror caps and a canDO+ module, but it's too cold today to do either.

[Cefoskey]

Originally Posted by AZG87

Same manufacturer, different versions. Did this for the exact same reasons of no winglets and needed a more conservative front lip so as not to kill the front clearance (it still ended up being more aggressive up front than planned).
Maxton v4 front lip
Maxton v3 sides and rear.

Ahh ok I see it now! Thanks.

Do the Maxton skirts (and lips for that matter) require you to drill/screw a whole bunch of holes in the rocker panels and front fascia to attach?

[BMR.WRLD]

Originally Posted by AZG87

FYI this is MP HAS at max drop

Can you please show me what both front and rear collars look like in relation to the threads? Because I think I raised my car instead of dropping it 🤣

[GregW / Oregon]

Originally Posted by Viffermike

Thur: Confirmed that these Rati Nook trunk organizer blocks work well with the factory carpeting in the trunk; ordered another set.

I would like to find an actual trunk carpet mat like BMW offered for the some previous Ms.