08-10-2024, 12:28 PM | #45 | |
Car Geek
4255
Rep 3,902
Posts |
Quote:
With the BMW 168K differential and 150lbft of engine torque in a Caterham, driveshafts can be snapped or splines stripped when using R-comp tyres and no CDV equivalent, i know of a few people who have done this at track events in the UK. |
|
Appreciate
3
|
08-11-2024, 07:46 AM | #46 | |
Christmas Poo
1628
Rep 1,407
Posts |
Quote:
I was driving my car yesterday and never realized I do this, but when I do a 2-3 or 3-4 shift for example as I clutch out I tend to hang my foot for a split second at the grab point, then release the clutch and get on it...this makes smoother shifts. If I don't then the shift is just a little jittery...putting this in context of this thread, is the reason I'm lagging my foot a bit to allow the clutch fluid and therefore the position of the clutch plate itself to "catch up" to the clutch position then grab? I don't really notice this with 4-5 or 5-6 gears but they are taller and you're going faster so wouldn't notice the jitteriness as much. I suspect with time I've just adapted how to drive these manuals smoothly and I always struck that behavior up to "power" of the engine. Does the CDV delete remove this lag? I'm afraid this is one of those things I can't "unsee" now and might just have to do it. I can't think of any downside risks other than getting some air in the system and making it spongy...
__________________
Drive the Manual - 2024 G87 - Mr. Hankey's M2 Build Thread
|
|
Appreciate
1
NewToM1634.50 |
08-11-2024, 10:32 AM | #47 | |
Car Geek
4255
Rep 3,902
Posts |
Quote:
|
|
Appreciate
1
Mr. Hankey1627.50 |
08-11-2024, 10:48 AM | #48 | |
Christmas Poo
1628
Rep 1,407
Posts |
Quote:
This is a good video outlining the process: CDV Valve removal
__________________
Drive the Manual - 2024 G87 - Mr. Hankey's M2 Build Thread
|
|
Appreciate
1
Good 4 2 reasons630.00 |
08-11-2024, 12:09 PM | #49 | |
Major
2689
Rep 1,236
Posts |
Quote:
In lower gears, your engine and transmission are spinning faster than higher gears at lower speeds due to the RPM ratio. What you’re describing is actually the right technique in letting the clutch connect the transmission to the engine properly at lower gears but higher RPM. If you were to simple take your foot off, regardless of the CDV, you’ll feel a shock. What the CDV does is allow a driver room for error when they don’t do what you’re describing, which is easier on the driveshaft etc. this is put in place for users who don’t understand the mechanics on how to disengage and engage clutch properly in accordance to their rev range in certain gears. Taking it out will allow you to “row gears” at higher speed and achieve smoother shifting along the way without a lag in clutch engagement. At higher gears the reason you’re able to engage the clutch faster than at lower gears is your engine is already up to speed and the rev range ratio on higher gears is lower. The engine and transmission does not need much finesse in fitting accordingly with the clutch at freeway speeds going into larger gears with longer gear ratio. So think of being able to drop a puzzle piece into a larger space vs having to really get it right to fit it in (at lower gears and lower rev range hence the hold of the clutch with foot). Hope this helps! |
|
Appreciate
3
|
08-11-2024, 04:23 PM | #50 |
Christmas Poo
1628
Rep 1,407
Posts |
Love that feeling, yes thats exactly how I drive it....been driving manual for 33 years, but that delay in this car and the F80s is certainly longer than others and wondering if the CDV delete shortens that lag slightly. I imagine it will and I imagine I won't notice too much of a difference given my driving style. I am more slow deliberate shifts over quick shifts, so I've never noticed this clutch pedal lagging behind my foot position, but that valve must certainly be creating some lag at the throwout bearing that isn't 1:1 with pedal position.
__________________
Drive the Manual - 2024 G87 - Mr. Hankey's M2 Build Thread
|
Appreciate
0
|
08-11-2024, 05:38 PM | #51 | |
Major
2689
Rep 1,236
Posts |
Quote:
|
|
Appreciate
1
Mr. Hankey1627.50 |
08-23-2024, 03:58 PM | #52 |
Enlisted Member
29
Rep 49
Posts |
Finally did the CDV delete.
Just wanted to be one more voice on here recommending it to anyone on the fence. It's not night and day different in feel but the slight change does make it a more enjoyable - the whole process is smoother and more predictable. starting off in 1st is a lot better and 1st to 2nd shift is a bit better. Also the clutch pedal feel feels a bit heavier to my leg (not much maybe 5-10%) but that could be my mind playing tricks on me. |
Appreciate
3
|
08-31-2024, 09:57 PM | #53 | |
Christmas Poo
1628
Rep 1,407
Posts |
Quote:
Interestingly my clutch feels just a tad lighter to me...must be all the air I let in!
__________________
Drive the Manual - 2024 G87 - Mr. Hankey's M2 Build Thread
|
|
Appreciate
3
|
10-25-2024, 12:48 AM | #54 |
You got my money?
4041
Rep 5,042
Posts
Drives: Ice Cream Truck
Join Date: Jul 2011
Location: ///OC
|
Does this mod move the clutch engagement point at all? I’d like the clutch to engauge sooner. I dislike how bmw clutches are so late in the pedal throw.
__________________
2025 G82 M2 6MT /// 2025 X5 40i X
|
Appreciate
0
|
10-25-2024, 07:32 AM | #55 | |
Private First Class
276
Rep 186
Posts
Drives: 2024 BMW M2
Join Date: May 2024
Location: Boston, MA
|
Quote:
This mod removes a moderating effect to the clutch engagement. The clutch will engage at the same point but it will feel more consistent and controllable. I suspect most people want both mods, and taken together they get the clutch feel, travel, and engagement they want. |
|
Appreciate
3
|
Post Reply |
Bookmarks |
|
|