[zfzkev]

Originally Posted by Alpine Wait

I usually don't like modded cars, but yours looks very nice. Great photography, too.

What's the story on the DRL color change? Easy swap out to a different (single?) LED?

Yeah very easy to do just gotta pull the front wheels and the front half of each liner and then its 3 torx screws on the backside of the headlight swap out the PCB and slab it back together.

https://ind-distribution.com/product...led-module-set

[zfzkev]

Originally Posted by all_my_rides

You have an IG Page for it? Would love to follow your build. Mine is all_my_rides! Great looking car! 🙌🏽🙌🏽

I follow you already ig: zfzkev

[zfzkev]

Originally Posted by J-RO

I hope you did not have to sell off some of your furniture to afford those mods!

I stopped updating the google spreadsheet in-case my wife finds it after im dead.

[zfzkev]

Since the Adro Grille is so controversial maybe its because I didn't complete their vision until now.

Huge box of goodies including the entire kit sans the grille. Including the Swan Neck Wing.

The Adro Carbon Fiber is extremely good quality but it had some light marring from shipping. Sonax Perfect Finish to the rescue. I followed it up with a coat of Adams Graphene.

Installation was really straight forward and fitment was A+




Rear End minus the Wing for now until I get bigger balls to start cutting the trunk. Hopefully in a week or two.

[Saphirschwarz]

incredible color and build, well done sir !

[BroDoze]

Those grilles are a mixed bag for me. Seems it depends on the angle. Need to see them in-person. Since that is 98% not happening, I’ll probably not risk the price of admission.

[Baller]

The "ardo" in the center of the front splitter is tacky, does it come off?
Is there a small indent left there?

Kit looks clean and the lines look smooth.

[zfzkev]

Originally Posted by Baller

The "ardo" in the center of the front splitter is tacky, does it come off?
Is there a small indent left there?

Kit looks clean and the lines look smooth.

It’s a small placard you could remove it…and your exactly right there is a small 1mm or so indent in the mold that would be left behind.

[hufington]

Nice color but a PITA to keep clean. I had a Saab Turbo the same color and it was a dust 🧲.

[MADBMWX5MC]

Great looking car!

[m3cole]

Looks sweet man! Stoked to get my g87 🤩

[middyM]

Originally Posted by Bumpinjeep

I'm on the other end of the spectrum about the grill. I don't like it at all. It narrows the front end down, with the horizontal slats, it elongates the front and makes it look wider. I have the csl style grill on mine and think it goes really well with the carbon intake pieces on the front of the car. But that's the beauty of modifying your car, you do what makes you happy.

Agreed. That grill doesn’t work on this car.

[Ejones4541]

Great looking color!!

Post some pics with the factory wheels.

[Tpriest7893]

Just out of curiosity, did you enjoy the Tesla?

[JasonX3]

Originally Posted by zfzkev

[SIZE="3"][FONT="Trebuchet MS"]
Hello all, This is my first BMW I previously owned MR2s and WRXs and Tesla Model 3 Performances and some boring ish in between. After being in a Model 3 Performance since 2018 I'm back on that gas. I was very close to getting a 45th Anniversary Supra but the improved interior of the M2 and the bonus of some jump seats in the back for kiddos swayed me to the M2...



Mod List:
Interior
JQ Werks MadTrace Clubsport Paddles - Amazing Feel over stock and if you're into mechanical Keyboards you will love these.
M Performance Alcantera Arm Rest
M Performance Floor Mats
M Performance Door Sills

Exterior
Innozetek Midnight Purple by @wrap.magic on IG
TRE ID-01 Spoiler
SE Coating and Fab Oil Cooler Guard @legendary_track_experience on IG
Zunsport Center Grille
MS+ Yellow DRLs
M Performance Carbon Inlets
IND Carbon Roundels
Black OEM M2 Logo
Autotecknic Carbon Antenna Cover
Adro Front Grille
Adro Carbon Splitter
Adro Carbon Sideskirts
Adro Carbon Diffuser
Adro AT-R3 Swan Neck Wing (not installed yet)

Performance
Exhaust - TFL Italy Full Exhaust w/ resonators Thanks to DailyDownshift. This sounds the best IMO of all the combos I've heard so far and something about the metalwork with those resonators is so sexy.

Wheels/Suspension
TE37s in OG Bronze
Front: 20X10 +8 PS4S 285/30/20 * Spec (OEM Rears)
Rear: 20X11 +15 PS4S 305/30/20
Springs: Eibach Pro Kit
Millway Camber Plates
Raceseng Titanium Wheel Stud Conversion
Raceseng Titanium TNS-2 [...]

Remind me.of the E36 M3 pffff what a time

[kindofburnt]

had me until i saw the black carbon roundels, it’s not a 2008 328i my man go back to oe!!

[washingtonea]

I agree, love this grill

[zfzkev]

Originally Posted by Tpriest7893

Just out of curiosity, did you enjoy the Tesla?

Yeah they're so fun to beat on they will melt tires pretty quickly because you will be launching the thing everywhere you go... But I needed sound again. My wife still has a Model Y it is such a good car for around town or even road tripping. They can haul quite a bit with the deep well in the trunk and the frunk.

[Mflies23]

Originally Posted by zfzkev

Thanks a lot! Yes I agree 100%. It fixes the front end for me over the horizontal grilles and was the one mod I knew without a doubt I was going to do. Shame it’s so expensive for a small piece but a must have.

I saw you drive by my shop in downtown Vancouver about a week ago. Looking good in the purple. Contemplating ordering Twilight Purple or Voodoo Blue

[ToMorNotToM]

Nice aesthetic upgrades over stock.

[zfzkev]

Originally Posted by Mflies23

I saw you drive by my shop in downtown Vancouver about a week ago. Looking good in the purple. Contemplating ordering Twilight Purple or Voodoo Blue

Ur going to have to go with blue I've got the purple one in town.

[BMW DIY Guy]

Absolutely gorgeous and as much as I love my Toronto Red, this is rhe purple I would have ordered.

The red turned out though too.. 8)

If there is anything I can do to help with Bimmertech or other upgrades, let me know.