What did you do to your M2 today? (G87 Edition)

JustinHEMI · 05-21-2023, 05:53 PM

Quote:

Originally Posted by johnnie311

As a bird lover who owns a 15 year old pet cockatiel, this is mildly unsettling.

I did give my car a stern talking to when we got home!

ModernAngel · 05-21-2023, 06:27 PM

Quote:

Originally Posted by bernard1414

Looks fantastic!! I’m stuck between this one and the slightly smaller one from TRE. Care to share a few more pictures of it on your car? Thanks

Sure! Here’s one more pic I got from behind

Gib007 · 05-21-2023, 06:33 PM

Quote:

Originally Posted by ModernAngel

Sure! Here’s one more pic I got from behind

I bought this exact spoiler for when I receive the car. Really nice seeing it on an M2 already!!

M Division · 05-21-2023, 08:21 PM

Quote:

Originally Posted by ModernAngel

Put on a “Pre Preg Carbon Fibre ID-01” spoiler by Tre yesterday. Hadn’t done a spoiler removal/install before so took some pics.

Good job! Any more pics? My car is BG also! Love it

ModernAngel · 05-21-2023, 11:56 PM

Quote:

Originally Posted by M Division

Good job! Any more pics? My car is BG also! Love it

Thanks! Sorry, no more pics as of now. :/

ModernAngel · 05-24-2023, 12:11 AM

Swapped out the shift boot and knob with an In.Focus boot and Black Forest Industries weighted knob.

ModernAngel · 05-24-2023, 08:59 AM

Quote:

Originally Posted by M2siast

Looks good. How does it compare?

Thanks! It’s a bit heavier. Nicer leather. Not a night-and-day difference but I’ve always had BFI knobs in my VWs so am just used to the feel.

MMMGuy60 · 05-24-2023, 09:24 AM

Quote:

Originally Posted by ModernAngel

Thanks! It’s a bit heavier. Nicer leather. Not a night-and-day difference but I’ve always had BFI knobs in my VWs so am just used to the feel.

Very nice! How easy it is to replace the shifter or boot?

mrjbb77 · 05-24-2023, 02:17 PM

I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips.

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Adding a short shifter as well.

I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!

Swish77 · 05-24-2023, 03:03 PM

Quote:

Originally Posted by mrjbb77

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Nice. Would be interested to see photos. Those are thick spacers.

Squidget · 05-24-2023, 03:55 PM

Quote:

Originally Posted by Swish77

Nice. Would be interested to see photos. Those are thick spacers.

In case you are interested, IND posted a pics of a 15/18 setup (and others) here.

M2Jorge · 05-24-2023, 04:48 PM

Quote:

Originally Posted by mrjbb77

I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips.

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Adding a short shifter as well.

I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!

Can you show us the front to see those beautiful inlets

Tuxon_Speed · 05-24-2023, 07:50 PM

Installed KW HAS kit and Macht Schnell spacers.

Both front and rear are dropped as low as they could go.

Spacers - 15mm in the front. 18mm in the rear. Could probably go a bit more aggressive in the front but I’ll hold off for now because I’ve just ordered wheels.

Ride quality is a bit more stiff but I enjoy the way it feels. So not a bad change in my opinion.

Video coming end of week!!!

mrjbb77 · 05-24-2023, 07:52 PM

Quote:

Originally Posted by M2CompJorge

Can you show us the front to see those beautiful inlets

Certainly!! Once I get her back!

Tuxon_Speed · 05-24-2023, 07:53 PM

Quote:

Originally Posted by mrjbb77

I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips.

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Adding a short shifter as well.

I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!

You’re going to love the RK tunes intakes!

mrjbb77 · 05-24-2023, 08:06 PM

Quote:

Originally Posted by Tuxon_Speed

Installed KW HAS kit and Macht Schnell spacers.

Both front and rear are dropped as low as they could go.

Spacers - 15mm in the front. 18mm in the rear. Could probably go a bit more aggressive in the front but I’ll hold off for now because I’ve just ordered wheels.

Ride quality is a bit more stiff but I enjoy the way it feels. So not a bad change in my opinion.

Video coming end of week!!!

Love it!! Looks sick!!

JustinHEMI · 05-24-2023, 08:28 PM

First wash!

Followed by Carbotech 1521 brake pads all around!

Followed by the yellow DRLs!

rk95 · 05-24-2023, 09:18 PM

[QUOTE=mrjbb77;30159863]I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips.

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Adding a short shifter as well.

I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!

Curious as to how the CF inlet install was. Would love to see a vid/hear a write up on it!

Connors5453 · 05-24-2023, 09:34 PM

Quote:

Originally Posted by JustinHEMI

First wash!

Followed by Carbotech 1521 brake pads all around!

Followed by the yellow DRLs!

Been busy!

ModernAngel · 05-24-2023, 09:36 PM

Quote:

Originally Posted by MMMGuy60

Very nice! How easy it is to replace the shifter or boot?

Not hard. But I’ve replaced boots and knobs on most every car I’ve had for years.

Basically just pull up on the boot and the boot and frame come right out. Then yank really hard on the stock knob and it pops off.

Then I just removed the old boot and knob and carefully pulled out all the staples that held the boot in. Didn’t wanna crack the plastic frame. Fit the new boot on and cut holes to hold it to the frame via the frame clips and fixed the corners down with a hot glue gun. Put the new knob in place and held the boot up to it with a zip tie. Took about an hour total. Used a boot sized for a Lancer Evolution X.

tylerdurdem · 05-25-2023, 09:05 AM

Quote:

Originally Posted by Tuxon_Speed

Installed KW HAS kit and Macht Schnell spacers.

Both front and rear are dropped as low as they could go.

Spacers - 15mm in the front. 18mm in the rear. Could probably go a bit more aggressive in the front but I’ll hold off for now because I’ve just ordered wheels.

Ride quality is a bit more stiff but I enjoy the way it feels. So not a bad change in my opinion.

Video coming end of week!!!

Beautiful! You doing a post in the suspension forum? I have questions . . .

mrjbb77 · 05-25-2023, 09:25 AM

[QUOTE=rk95;30161099]

Quote:

Originally Posted by mrjbb77

I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips.

Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers.

Adding a short shifter as well.

I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!

Curious as to how the CF inlet install was. Would love to see a vid/hear a write up on it!

You have to cut the oem inlets where the center bar runs across. That has to go for the MP CF inlets to be able to be placed into the vent area.

I used a small electric saw, I was VERY careful not to cut into anything I wasn't supposed to so it took me about 10 min each side to cut properly and then I washed the area with soap and water and then dried and placed the MP CF inlets in there with the 3M tape that it comes with, perfect fitment.

Pretty easy.

05-24-2023, 12:11 AM	#72
ModernAngel Private First Class 608 Rep 160 Posts Drives: G45 X3 M50 Join Date: Mar 2014 Location: IL iTrader: (0) Garage List 2023 BMW M2 [0.00]	Swapped out the shift boot and knob with an In.Focus boot and Black Forest Industries weighted knob. Attached Images
	Appreciate 7 deleted_807865_k0a0df9ee6877.50 JustinHEMI7501.00 ourlee1532.00 Bumpinjeep6217.00 ronin130131067.00 Clippy55.50 MUFCbmwbear737.50 Quote

05-24-2023, 02:17 PM	#75
mrjbb77 Second Lieutenant 210 Rep 228 Posts Drives: F95 X5MC, GT3RS, Huracan Join Date: Mar 2015 Location: Orlando, FL iTrader: (0)	I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips. Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers. Adding a short shifter as well. I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3!
	Appreciate 20 IND-Distribution10009.50 ronin130131067.00 Swish77393.00 bean_140.00 turbowilly64.00 jay1k282.50 M2Jorge881.50 Hypori151.00 Slick1984234.50 johnnie311202.00 JustinHEMI7501.00 ModernAngel607.50 awg87190.00 bmwimsafan28.00 T_U_D6706.50 Sherlock997235.00 GuyOh1271.00 02M3ForMe4347.00 pdx_m3r172.00 Searay55555381.00 Quote

05-24-2023, 07:50 PM	#79
Tuxon_Speed Private First Class 639 Rep 166 Posts Drives: 2023 M3 COMP XDRIVE Join Date: Jan 2023 Location: Tucson, AZ iTrader: (0) Garage List 2023 BMW M3 Competi ... [0.00]	Installed KW HAS kit and Macht Schnell spacers. Both front and rear are dropped as low as they could go. Spacers - 15mm in the front. 18mm in the rear. Could probably go a bit more aggressive in the front but I’ll hold off for now because I’ve just ordered wheels. Ride quality is a bit more stiff but I enjoy the way it feels. So not a bad change in my opinion. Video coming end of week!!! Attached Images
	Appreciate 21 Connors5453515.50 johnnie311202.00 JustinHEMI7501.00 Hypori151.00 ModernAngel607.50 vampire81508.50 Kevin_The_Clean14137.00 Game8130.00 ronin130131067.00 bean_140.00 bmwimsafan28.00 DriveWithDray2252.50 EthanEJC236.00 GuyOh1271.00 02M3ForMe4347.00 lovelyM21.50 Bumpinjeep6217.00 Searay55555381.00 ledgy241.00 ourlee1532.00 daddyjaxx113.50 Quote

05-24-2023, 08:28 PM	#83
JustinHEMI Not great. Not terrible 7501 Rep 2,699 Posts Drives: 2024 BMW X3 M40i Join Date: Apr 2016 Location: Lebanon, TN iTrader: (2)	First wash! Followed by Carbotech 1521 brake pads all around! Followed by the yellow DRLs! __________________ Current: 2024 BMW X3 M40i.
	Appreciate 6 johnnie311202.00 Hypori151.00 Connors5453515.50 bmwimsafan28.00 Tag20007.00 02M3ForMe4347.00 Quote

05-24-2023, 09:18 PM	#84
rk95 Lieutenant 430 Rep 467 Posts Drives: BMW M4 Join Date: Jun 2022 Location: PA iTrader: (1)	[QUOTE=mrjbb77;30159863]I installed CF air inlets for the front, IND black M2 badge, CF trunk lip and black chrome exhaust tips. Going to the shop today to get lowered on MMR springs and 15mm f and 18mm r spacers. Adding a short shifter as well. I have a valvetronic single Midpipe on order and RK tunes intakes on the way!! More to come!! Here she is next to my 992 GT3! Curious as to how the CF inlet install was. Would love to see a vid/hear a write up on it!
	Appreciate 2 Connors5453515.50 johnnie311202.00 Quote