[AdiSinghV12]

Originally Posted by IND-Distribution

This confirms our recommended stock ride height spacer fitment of 15mm front and 12mm rear to keep a uniform look. Like the G8x, on stock suspension you can also run 15/15.

This is essentially how we ended up on our 'aggressive' recommendation. Lowered with a little added camber, 18/15 is great fitment, but again you can run the square 18/18 for a bit more aggression in the rear.

Do you advice 18/18 for regular use on complete stock suspension with track usage? As I live in India lowering is out of question so at best can get the fender liners if needed

[G87_mtwo]

I do have spacers 12mm & 15mm. Can anyone tell what extended lug nut size I need for them? What should be tread length?

[Ronin76]

Originally Posted by rcouchh

This is +15F +18R on KW HAS. Rear is almost perfect and front could use a few mm.

IND tricked a lot of people into buying poor fitting 12mm spacers.. maybe they had a huge stock they needed to flip 🤣

I think 18F 20R will end up being the best in the future.

Looks amazing....and mean! well done sir.

[apez]

Well, I just tried 18F 15R with the default port installed MP HAS drop and Sottozeros. Definitely rubbing in front.

[rcouchh]

Originally Posted by apez

Well, I just tried 18F 15R with the default port installed MP HAS drop and Sottozeros. Definitely rubbing in front.

Probably just need to heat and push the plastic fender liner in a bit. Easy fix for G8X, check youtube

[Resoelg]

OP. Greatly appreciate the photos and post. Gives the community great information about possible mods.
Sure did for me.
Question....noob to spacers. Does increasing the thickness of the spacer (changing the wheel position)
create a noticable change in handling, cornering dynamics, or ride stability? I'm not planning on suspension change at this point.

[Don-DiGorno]

Recently got a set of these but I noticed there’s no Future Classic in bold white branding on them. Instead, etched into them is Fall-Line along with the size and bolt measurements. Are these legit? Lol

[IND-Distribution]

Originally Posted by Don-DiGorno

Recently got a set of these but I noticed there’s no Future Classic in bold white branding on them. Instead, etched into them is Fall-Line along with the size and bolt measurements. Are these legit? Lol

Absolutely, your Future Classic spacers are genuine. Fall-Line has always been the manufacturer for Future Classic parts, including these spacers. While you may have noticed a change in branding from laser-etched Future Classic logos to engraved Fall-Line logos, rest assured, this alteration doesn't affect the quality or performance of the spacers. Fall-Line, known for their excellence in racecar construction and fabrication, ensures that these spacers meet the same high standards as before. If you have any further questions or concerns, feel free to reach out.

[Don-DiGorno]

Originally Posted by IND-Distribution

Absolutely, your Future Classic spacers are genuine. Fall-Line has always been the manufacturer for Future Classic parts, including these spacers. While you may have noticed a change in branding from laser-etched Future Classic logos to engraved Fall-Line logos, rest assured, this alteration doesn't affect the quality or performance of the spacers. Fall-Line, known for their excellence in racecar construction and fabrication, ensures that these spacers meet the same high standards as before. If you have any further questions or concerns, feel free to reach out.

Thank you so much for the quick response and education. I really appreciate it. You guys are awesome and it’s been a pleasure doing business with you!

[JMcLellan]

This thread along with other member feedback helped me decide on spacers. Just ordered from IND today some 15mm and 18mm with extended lugs. Going to try 15 front and 18 in the rear.

[SlezbuckG87]

This is super helpful! Thank you!

[apez]

FYI, I went with the IND future classic 18F 15R option and had rubbing full lock in reverse.

For now I just trimmed the offending 3 louvers down to about half the normal size. It was an ugly hack job, but it has solved my problem. I may end up going with some of the aftermarket mesh inserts if I can find a reasonable priced pair.

Car looks so much better now.

[AZG87]

When I was waiting for my forged wheels I had Future Classic 12mm all around. Conservative but filled out nicely. MP HAS at port installed height. No rub at full lock.