[AndyVTForged]

Originally Posted by M_Power Rob

Are you lowered all the way? What size tires?

HAS kit, not lowered all the way.

Front is a 275/35/20 and rear is a 305/30/20.

[M_Power Rob]

Originally Posted by AndyVTForged

HAS kit, not lowered all the way.

Front is a 275/35/20 and rear is a 305/30/20.

Ok, almost identical to what I am running (except I am 275/30/20 on the fronts).

[M_Power Rob]

Originally Posted by M-2'ned

AST HAS at 1.5 inches front, level in the rear.

Rim/tire size? You chose to go with Contis?

[M-2'ned]

AST HAS at 1.5 inches front, level in the rear.

[M-2'ned]

Originally Posted by M_Power Rob

Rim/tire size? You chose to go with Contis?

Had to re-upload so my license plate wasn't showing. Yes, contis. 19x10 front, 20x11 rear. Rear has 305's

[M_Power Rob]

Originally Posted by M-2'ned

Had to re-upload so my license plate wasn't showing. Yes, contis. 19x10 front, 20x11 rear. Rear has 305's

Nice...I wondered what happened when I replied and your post was gone.

[tom @ eas]

Just put the finishing touches on this Brooklyn Grey M2:

- BMW M Performance Suspension
- M Performance 963M Wheels
- Macht Schnell Competition Wheel Spacers (10F/12R)

[Higgy_CSL]

In progress…. Should be done tomorrow.

[AZG87]

Originally Posted by AndyVTForged

Hey guys, wanted to post some photos of Mark's G87 M2 sitting on 20x10/11 VTForged SL-A SuperLite in Matte Black, with our optional 3-piece carbon cap upgrade. Enjoy!

















If you want to see more, full gallery of this shoot is on our site!

What are the offsets on the 10s and 11s? That sits damn near perfect. Do you have the weights of those off hand? Is there a comparable 19 in the front that would sit close or the same?

[Game]

Originally Posted by AndyVTForged

HAS kit, not lowered all the way.

Front is a 275/35/20 and rear is a 305/30/20.

Gorgeous.

Which HAS kit?

[baron95]

Originally Posted by tom @ eas

Just put the finishing touches on this Brooklyn Grey M2:

- BMW M Performance Suspension
- M Performance 963M Wheels
- Macht Schnell Competition Wheel Spacers (10F/12R)

Any rubbing up front?

[Jack@AUTOID]

Originally Posted by AndyVTForged

Hey guys, wanted to post some photos of Mark's G87 M2 sitting on 20x10/11 VTForged SL-A SuperLite in Matte Black, with our optional 3-piece carbon cap upgrade. Enjoy!

















If you want to see more, full gallery of this shoot is on our site!

This looks insane!

[Jack@AUTOID]

Might as well add my old girl to the thread!

[tom @ eas]

Originally Posted by baron95

Any rubbing up front?

None at all.

[Higgy_CSL]

Top image is stock, bottom image is BMW’s M Performance HAS kit. Slightly lowered, I want to make sure it survives the driveway before I go any lower. Now I need some spacers.

[TT0997]

Originally Posted by tom @ eas

Just put the finishing touches on this Brooklyn Grey M2:

- BMW M Performance Suspension
- M Performance 963M Wheels
- Macht Schnell Competition Wheel Spacers (10F/12R)

Looks great ! What’s the setting of the MP HAS ? Max Lowered ? If yes what’s the max range allowed by the MP HAS kit?

Hesitating between paying 3500,- for MP HAS with warranty, or going KW HAS for 1200,- at my tuner but losing warranty.

Also still don’t have an answer from my dealer if going max lowered on MP HAS (meaning more than the recommended 10mm) cause any issue with the warranty.
If yes, maybe KW HAS is the best route.

[M_Power Rob]

Originally Posted by TT0997

Looks great ! What’s the setting of the MP HAS ? Max Lowered ? If yes what’s the max range allowed by the MP HAS kit?

Hesitating between paying 3500,- for MP HAS with warranty, or going KW HAS for 1200,- at my tuner but losing warranty.

Also still don’t have an answer from my dealer if going max lowered on MP HAS (meaning more than the recommended 10mm) cause any issue with the warranty.
If yes, maybe KW HAS is the best route.

You sure the cost for port installed MP HAS is $3,500? I paid $2,820. There should not be any issues with the warranty if port/dealership installed MP HAS lowered to any settings.

If comparing pricing, I would also confirm with your shop the price for KW HAS installed ($1,200 sounds low). Don't forget you will need an alignment done after installation which adds to the cost.

[TT0997]

Originally Posted by M_Power Rob

You sure the cost for port installed MP HAS is $3,500? I paid $2,820. There should not be any issues with the warranty if port/dealership installed MP HAS lowered to any settings.

If comparing pricing, I would also confirm with your shop the price for KW HAS installed ($1,200 sounds low). Don't forget you will need an alignment done after installation which adds to the cost.

Hey, many thanks for your answer !

Yes I have the quotation from my dealer.

I am located in Luxembourg so the price may be different than yours (also in €). I am not sure to understand what “port installed” really means, but here the only option I have first is to purchase the car and then when it arrives, that the dealer set the MP HAS on the car.

10mm is not enough for me so I want to lower max on the 4 corners (which I believe with MP is -25F/-20R), but want to be sure they will not Argue later that I wanted to do differently than the recommended setting and so that no warranty is applicable.
Still have to obtain a mail confirmation, otherwise MP HAS do not worth this money for me and I will go with KW HAS (and lose the guarantee on suspensions).

Yes I add the quote from my (well-known) tuner for 1500€ including KW HAS, spacers 10F/12R, and alignement). Then I need an extra 500,- for legalisation of the mods on the car (insurance purposes).

[RichyN]

MP HAS full way down M3 wheels with MPS4. The P0 lethal in wet.. 15mm spacers on rear.

[M_Power Rob]

Originally Posted by TT0997

Hey, many thanks for your answer !

Yes I have the quotation from my dealer.

I am located in Luxembourg so the price may be different than yours (also in €). I am not sure to understand what “port installed” really means, but here the only option I have first is to purchase the car and then when it arrives, that the dealer set the MP HAS on the car.

10mm is not enough for me so I want to lower max on the 4 corners (which I believe with MP is -25F/-20R), but want to be sure they will not Argue later that I wanted to do differently than the recommended setting and so that no warranty is applicable.
Still have to obtain a mail confirmation, otherwise MP HAS do not worth this money for me and I will go with KW HAS (and lose the guarantee on suspensions).

Yes I add the quote from my (well-known) tuner for 1500€ including KW HAS, spacers 10F/12R, and alignement). Then I need an extra 500,- for legalisation of the mods on the car (insurance purposes).

Sorry about that, didn't look to see where you are located. Obviously can't compare pricing in the US vs overseas. I dontbsee hownyour location would affect the warranty as its BMW no matter where one is located.

[M_Power Rob]

Originally Posted by RichyN

MP HAS full way down M3 wheels with MPS4. The P0 lethal in wet..

Not much difference between you lowered all the way and BMW's setting (I am on 20s in the front).

[RichyN]

Originally Posted by M_Power Rob

Not much difference between you lowered all the way and BMW's setting (I am on 20s in the front).

Yeah looks similar.. BMW I believe specify height from wheel to the arch so maybe it's actually more than 10 mm or it settles in after. Mine was actually corner balanced so may be a bit of adjustment of the bottom setting possibly. Both look pretty good 👍