[Jerry333]

Customized guard - light weight

[JWG80M3]

Admired it while barbecuing…

[izzyM2]

Originally Posted by 1stM

I did use the zip ties on the ACC bracket.

No ACC bracket on mine, but great job hiding it a bit.

[aerobod]

[QUOTE=mtoosexy;30775717]

Originally Posted by JustinHEMI

I know getting in right at 1200 doesn't really matter, but I'm a little proud of this.

[/QUOTE

u should have taken it around the block one more time

I did a bit of backwards and forwards outside the dealer drive-through to make it exactly 2000.0km:

[mtoosexy]

You know what sir?... I like the cut of your jib!!!
Well played!

[Bumpinjeep]

Autotecknic CSL grill in carbon. So far, the quality of the grill looks top notch. The packaging was absolutely insane though, so much bubble wrap inside two different sleeves, this thing is not going to break during shipping lol. Once the other carbon bits come in, hopefully in a couple of weeks, I'll install it all.

[JABCAT]

Installed the M Performance carbon fiber door sill plates. Simple 5-min installation and order from www.bmwpartscenter.com for $268.69 total including shipping.

Part # 51-47-2-472-521

The first pic makes it appear as if they're larger than the standard sill plates, they're not. They came with new clips/pins 6 white and 4 larger green. Not sure what the green were for, there are only 6 holes in the door sill & the standard plates use only the 6 white pins.

[Fastfwd]

Drove it like I stole it on my last day of a 6 day trip over to Arkansas.... this thing is impressive!

[Fastfwd]

[QUOTE=aerobod;30776479]

Originally Posted by mtoosexy

I did a bit of backwards and forwards outside the dealer drive-through to make it exactly 2000.0km:

I'm glad I wasn't the only one who tried to nail the miles for break in service.

[sacowich]

Tonight, I finally put a build thread in the other section. Hope you check it out.

[TwinWhistles]

Originally Posted by Searay55555

Pulled these pesky carbon filters out tonight. My 10 minute mod of the day.

What is the benefit of doing this? I realize it's less airflow restriction, but can you actually tell from your butt dyno?

[Searay55555]

Originally Posted by TwinWhistles

What is the benefit of doing this? I realize it's less airflow restriction, but can you actually tell from your butt dyno?

Honestly, no I have not been able to tell. But, the time investment was less than 10 minutes so I thought I’d give it a shot.

[NewToM]

Getting the Stradale front lip installed today!

[mrdudley]

Originally Posted by sacowich

Tonight, I finally put a build thread in the other section. Hope you check it out.

I was just saying how if I wrap my car, it’d be purple. Looks great!

[M2BOT]

Originally Posted by Searay55555

Honestly, no I have not been able to tell. But, the time investment was less than 10 minutes so I thought I’d give it a shot.

I’ll take my clean smelling cabin over a 0.5HP gain any day

[Searay55555]

Originally Posted by M2BOT

I’ll take my clean smelling cabin over a 0.5HP gain any day

Zero difference in the smell of the cabin. It’s identical to day one.

[M2BOT]

Originally Posted by M2siast

It’s not something you may be able to smell (much like the added performance), but it’ll be there, off gassing from the combustion coming back up is a thing. This thing is there for pollution control, so removing it will allow some gas to escape back up. Whether it’s discernible or not is another matter. My cars without them had a characteristic smell under the hood, unlike new cars. Having had the prior experience of removing it twice and not feeling anything, I’m on team stock this time around. Less is more, and the more the car is molested the less valuable it is too, something to consider.

BMW cut costs and weight a whole lot with this car. No electric tailgate, no 360 cameras, no NFC in manuals. If the carbon filters weren’t absolutely necessary, they’d have left them out.

Removing them is unlikely to add any performance benefit and keeping them is likely to improve your air quality substantially.

[M2 CCO]

Went out to the edge of town and did a few sport+ take offs and drive bys of the new exhaust set up. AA EL paired up with Eisenmann Axle back. Video is pretty terrible I’m definitely not a skilled YouTuber!

https://youtube.com/shorts/QoBaGjDZH...TvdnovWZXEzxrB

[MMMGuy60]

Did my 1st service, and waited 2 hours instead of taking a loaner. I went home and installed the front mud flap cuz this bitch love kicking rocks all over the place.

[rcouchh]

RK front mount intakes, carbon grille, MAD fatboy catless downpipes, JB4 installed today. Feels like a whole different beast!

Had to cut a pretty large section out of the grille to get intakes to fit. Glad I went the China route for under $500 versus the Alpha-N for $1500. Quality and fitment is good, despite having to widen almost all of the 18 clips around the grilles lol.

Crappy phone pics for now

[M2Jorge]

Originally Posted by rcouchh

RK front mount intakes, carbon grille, MAD fatboy catless downpipes, JB4 installed today. Feels like a whole different beast!

Had to cut a pretty large section out of the grille to get intakes to fit. Glad I went the China route for under $500 versus the Alpha-N for $1500. Quality and fitment is good, despite having to widen almost all of the 18 clips around the grilles lol.

Crappy phone pics for now

What did you cut the grill with?

[JABCAT]

Originally Posted by rcouchh

RK front mount intakes, carbon grille, MAD fatboy catless downpipes, JB4 installed today. Feels like a whole different beast!

Had to cut a pretty large section out of the grille to get intakes to fit. Glad I went the China route for under $500 versus the Alpha-N for $1500. Quality and fitment is good, despite having to widen almost all of the 18 clips around the grilles lol.

Crappy phone pics for now

Really like the front splitter and side skirts (not the price though)