11-08-2024, 10:16 AM | #1 |
New Member
34
Rep 30
Posts |
G87 M2 - track safety devices
Hey Guys,
Does anyone have experience with installing 6-point harnesses on their factory carbon buckets? It seems like they're fit for them, but it's not clear and there isn't much info online. Which rollbar works best with the G87 for harness mounting? Any info would be much appreciated. Thanks! |
11-08-2024, 09:00 PM | #2 |
Keep Up the RPMs
1343
Rep 534
Posts
Drives: M3CS
Join Date: Aug 2023
Location: Germantown, MD
|
__________________
Cheers,
BoB |
Appreciate
0
|
11-11-2024, 12:12 AM | #3 |
New Member
2
Rep 15
Posts |
I've looked into this and I don't think there are any 6-point options with the factory carbon buckets.. best I could source was a 4-point that either uses factory seatbelt locations, or half cage/ harness bar.. I'm using the Schroth QuickFit Pro 4-point from the E92 M3, because I still occasionally use the rear seats for my kids, so can't install a cage or harness bar.
|
Appreciate
0
|
11-11-2024, 02:36 AM | #4 | |
///Modified
2963
Rep 1,483
Posts |
Quote:
The quickfit pro already has the slot in the rotary buckle to upgrade to a 6 point. You will obviously need to have the seat base modified (cut & sewn) to suit (if the silly carbon insert piece is removable that may be an option).
__________________
Last edited by TargaM2; 11-11-2024 at 02:39 AM.. |
|
Appreciate
0
|
11-11-2024, 05:16 AM | #5 |
New Member
2
Rep 15
Posts |
yes, they do have the allowance for the addition of sub straps to make them 6-point, but that would mean cutting the factory carbon buckets to make it work.. think I would rather install aftermarket buckets if I get more serious with track duties
|
Appreciate
0
|
11-11-2024, 06:46 PM | #6 |
First Lieutenant
685
Rep 368
Posts |
I would be wary of that setup. Schroth told me not to use their quikfit pros in the M2. IIRC, the angle of the rear straps is too steep which could result in severe injury.
__________________
2022 M850i
2023 M2; MCS 3-way coilover, Vorshlag Camber plates, 19" Apex VS-5RS, 305 Goodyear 3R, SPL links, Adro wing, IRL exhaust, Racechip, Verus Splitter; IG:g87_43 |
Appreciate
0
|
11-11-2024, 08:27 PM | #7 |
New Member
2
Rep 15
Posts |
It's the same angle and install points as approved for the E92 M3, only difference is the G8X carbon buckets which are yet to be tested by Schroth, hence why not released specifically for G8X. I've taken that risk as the only option on-market that clips in and out easily, without installing a roll cage/ harness bar that renders the rear seats useless.
|
Appreciate
0
|
11-11-2024, 08:36 PM | #8 |
New Member
2
Rep 15
Posts |
they're also approved for the cobra nagaro and recaro pole positions so gave me more confidence, considering the closer designs to the G8X carbon buckets
|
Appreciate
0
|
11-13-2024, 03:03 PM | #9 |
Private First Class
209
Rep 133
Posts
Drives: 2023 X3 M40i
Join Date: Jan 2023
Location: Midwest
|
Schroth Quick Fit & Quick Fit Pro Video
Here's more info on these models.
Schroth will not certify their belts for a specific model without specifically testing them on that vehicle. That said, I used the Schroth Quick Fit model on my former '19 230i xDrive for auto-x and several PDEs. Great improvement in holding you in place. I don't believe the seat setup is significantly different in current 2 series...but as they will tell you, use at your own risk. |
Appreciate
0
|
11-14-2024, 03:58 AM | #10 | |
///Modified
2963
Rep 1,483
Posts |
Quote:
That would be entirely dependant on what seats they were talking about… the stock seats are obviously going to have a different angle to the carbon buckets. The general rule in motorsport regarding safe operation is a 45 degree max angle.
__________________
Last edited by TargaM2; 11-14-2024 at 04:03 AM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
g87 m2, harness, racing, safety, track |
Thread Tools | Search this Thread |
|
|