[Good 4 2 reasons]

https://www.kiesmotorsports.com/prod...=shopify_email

My PPF installer put on the new spoiler while they had it in. It's nice quality and I like the pop of carbon amidst all the white. I know there are dirt cheap aliexpress options but for $188 I like the results.

[JABCAT]

Looks good

[Baby_G42M]

Originally Posted by Good 4 2 reasons

https://www.kiesmotorsports.com/prod...=shopify_email

My PPF installer put on the new spoiler while they had it in. It's nice quality and I like the pop of carbon amidst all the white. I know there are dirt cheap aliexpress options but for $188 I like the results.

how flush is the fitment? If you don't mind showing a top-down view as well. I have a 240 coming in and have been considering this spoiler.

[rabbitsmell]

That helps. I’ve looked at this spoiler but wasn’t sure if it fits all the way across

[Ronin76]

Originally Posted by Good 4 2 reasons

https://www.kiesmotorsports.com/prod...=shopify_email

My PPF installer put on the new spoiler while they had it in. It's nice quality and I like the pop of carbon amidst all the white. I know there are dirt cheap aliexpress options but for $188 I like the results.

I like the products from Kies. I think they have good stuff and the prices are fair. They are from Jersey too so that is a plus

[Good 4 2 reasons]

Originally Posted by Baby_G42M

how flush is the fitment? If you don't mind showing a top-down view as well. I have a 240 coming in and have been considering this spoiler.

Here ya go! Disclaimer: Yes it's dirty. I am waiting for my first wash with the PPF installer to go over care.

[dissident111]

Originally Posted by Good 4 2 reasons

Here ya go! Disclaimer: Yes it's dirty. I am waiting for my first wash with the PPF installer to go over care.

Looking good!

I went with duck bill style and had painted to match kind of like CSL look.

[M_Power Rob]

[QUOTE=dissident111;31588730]Looking good!

I went with duck bill style and had painted to match kind of like CSL look.[corner.


Something looks off (literally)...unless my eyes are deceiving me, that is full mounted on the driver side, front corber.

[Good 4 2 reasons]

Originally Posted by dissident111

Looking good!

I went with duck bill style and had painted to match kind of like CSL look.

What brand spoiler was that?

Honestly, when it is all said and done, I think the G87 looks best with no spoiler.

If I hadn't already gotten my Kies spoiler when I saw photos without the spoiler, I would have just removed it.

I think painting white makes sense with no carbon roof, definitely gives a cohesive color scheme.

Cheers!

[M_Power Rob]

Originally Posted by Good 4 2 reasons

What brand spoiler was that?

Honestly, when it is all said and done, I think the G87 looks best with no spoiler.

If I hadn't already gotten my Kies spoiler when I saw photos without the spoiler, I would have just removed it.

I think painting white makes sense with no carbon roof, definitely gives a cohesive color scheme.

Cheers!

To each their own but it looks unfinished without a spoiler and the OEM is an absolute joke.

IMO, the spoilers manufactured to not go to the lip of the trunk or span the width of the trunk (yes M Performance, I am talking about you) look poorly designed (or cheaper out on material).

My top picks are the TRE-01 and Unit 17 OEM++.

[Good 4 2 reasons]

Originally Posted by M_Power Rob

To each their own but it looks unfinished without a spoiler and the OEM is an absolute joke.

IMO, the spoilers manufactured to not go to the lip of the trunk or span the width of the trunk (yes M Performance, I am talking about you) look poorly designed (or cheaper out on material).

My top picks are the TRE-01 and Unit 17 OEM++.

I guess adding a larger spoiler on the trunk, carbon or otherwise, calls for more aero mods to balance out the looks. I think if you don't want to go down that road, a naked trunk without the pitiful factory spoiler looks cleaner. BMW's decision to put two bends in the trunk sheet-metal really makes it difficult to design a spoiler that's going to compliment every angle.

Either way, it's definitely subjective. After all, the best selling BMW cosmetic modification has to be M colored grill stripes...

[JABCAT]

Originally Posted by M_Power Rob

Something looks off (literally)...unless my eyes are deceiving me, that is full mounted on the driver side, front corber.

I've seen several pics of this spoiler and it doesn't seem to fit flush on the trunk, same in this pic. Zoomed in, the color also looks off from the rest of the car in this pic.

[M_Power Rob]

Originally Posted by JABCAT

I've seen several pics of this spoiler and it doesn't seem to fit flush on the trunk, same in this pic. Zoomed in, the color also looks off from the rest of the car in this pic.

As to color, maybe "factory" BMW paintbwasnt used?

[JABCAT]

Originally Posted by M_Power Rob

As to color, maybe "factory" BMW paintbwasnt used?

Idk - but it appears off-white in that photo. I had my tre-01 painted to match & it's a pretty perfect match to my trunk.

[dissident111]

Originally Posted by JABCAT

Idk - but it appears off-white in that photo. I had my tre-01 painted to match & it's a pretty perfect match to my trunk.

Yes. Depending on the lighting it seems a tiny bit off. Was supposed to use same color code but I may bring it back and have it redone.

[M_Power Rob]

[QUOTE=JABCAT;31593537]Idk - but it appears off-white in that photo. I had my tre-01 painted to match & it's a pretty perfect match to my trunk.[/matching.


Yeah, I did my calipers and purchased the Brooklyn Grey from BMW so it would be an exact color match.

[SpaceGhost]

Originally Posted by dissident111

Looking good!

I went with duck bill style and had painted to match kind of like CSL look.

dissident111 and JABCAT:

When they painted your spoilers, did they do the spoiler alone and then install or did they install the spoiler and then spray it and blend it into the trunk etc?

I am not too comfortable with them trying to spray/blend into my new car's paint.

However if they don't blend, I also worry that they will not be able to adequately match my Skyscraper paint for the spoiler.

I am in the minority that I actually like the MP spoiler even though it doesn’t go to the edge of the trunk. From the rear, it blends nicely into the existing body lines. From the side, it seems to extend the trunk lip vs sitting on top of the trunk edge which is nice to my eyes.

[dissident111]

Originally Posted by SpaceGhost

dissident111 and JABCAT:

When they painted your spoilers, did they do the spoiler alone and then install or did they install the spoiler and then spray it and blend it into the trunk etc?

I am not too comfortable with them trying to spray/blend into my new car's paint.

However if they don't blend, I also worry that they will not be able to adequately match my Skyscraper paint for the spoiler.

I am in the minority that I actually like the MP spoiler even though it doesn’t go to the edge of the trunk. From the rear, it blends nicely into the existing body lines. From the side, it seems to extend the trunk lip vs sitting on top of the trunk edge which is nice to my eyes.

I just brought it to a paint shop and they scanned the paint code, primed and painted it. I put it on after I picked it up.

[SpaceGhost]

Originally Posted by dissident111

I just brought it to a paint shop and they scanned the paint code, primed and painted it. I put it on after I picked it up.

Thanks!

[nicoG87]

Originally Posted by SpaceGhost

I am in the minority that I actually like the MP spoiler even though it doesn’t go to the edge of the trunk. From the rear, it blends nicely into the existing body lines. From the side, it seems to extend the trunk lip vs sitting on top of the trunk edge which is nice to my eyes.

I’m starting to like the MP spoiler design too. I also find it looks better in the M2 than the 240. Maybe our chunkier bumper ?

While it doesn’t extend to the side edges, the lines are a perfect continuation of the side profile lines.

Also the fact that it extends the trunk lip instead of stacking on top of it (which the other V shape spoilers do) makes me think of the the aerodynamics of that design (MP, Turner high kick). I noticed that BMW stuck with the MP spoiler for their race version M2.

My fav v shape spoiler is 3D design. But even that has a weird side profile (see attached)

[SpaceGhost]

Originally Posted by nicoG87

I’m starting to like the MP spoiler design too. I also find it looks better in the M2 than the 240. Maybe our chunkier bumper ?

While it doesn’t extend to the side edges, the lines are a perfect continuation of the side profile lines.

Also the fact that it extends the trunk limp instead of stacking on top of it (which the other V shape spoilers do) makes me think of the the aerodynamics of that design (MP, Turner high kick). I noticed that BMW stuck with the MP spoiler for their race version M2.

My fav v shape spoiler is 3D design. But even that has a weird side profile (see attached)

Good to know I am not alone. Seems there aren't many of us though...ha ha.

Now I just need to find a good place to buy one that will have good fitment.

I think that 3D v style would look bettermif it sat back on the trailing edge of the decklid.

[Knight_13]

Originally Posted by SpaceGhost

Good to know I am not alone. Seems there aren't many of us though...ha ha.

Now I just need to find a good place to buy one that will have good fitment.

I think that 3D v style would look bettermif it sat back on the trailing edge of the decklid.

There are dozens of us! haha. I am about to order a new spoiler and was trying to love the TRE-01 since I just had the M-perf one on my 240, but I just cannot get with the look of it sitting on top of the trunk lid. The MP really blends the trunk lines the best and completes the rear end imo.